hi Petrut
i download your patch but till now i didn't use it
since my GPS board not fixed yet
i won't to reflash my N117 board
in the readme file i find the part talking about the reflashing
my quastion is does the reflash files that mention in the readme file included with the zip folder with the patch?
if yes what is name (is it the upgrade)
if no from where i can get the reflash files
of course thank you
petrut best. I have a wince 6 purchased at u. this I install and works well. only I can not boot the desktop where the system tool in State. can you perhaps help me. marcel.
Good Day Petrut,
Your custom CE6 patch has been working very well and I'm just waiting for the arrival of the 7711 wifi dongle to see if internet access will work.
My question has to do with factory original R.A.P.(Retained Accessory Power)which is basically any accessory connected to this will remain on for approx. 10 minutes or until 1 of the vehicle doors is opened (Ford) which ever comes first will shut down those accessories tied into this system.
It appears that in my case the shutting off of those RAP accessories is controlled through MS-CanBus.
The problem is my new GPS/Nav/Multimedia that replaced the OEM radio does not send the signal to MS Can to keep it on for 10 minutes (or when a door is opened) after shutting off the vehicle ignition.
Is there a way to configure my CE6 custom patch to trigger the factory MS Can so that it regonizes this new device (GPS/Nav)as it does with the OEM radio that it replaced?
I have this>> http://bit.ly/Kwuunf unit and Im having issues with the WinCE as I think I messed the settings.. anyway, If I flash your patch will
1) I still be able to access BOTH onboard SDcards
2) Can I access my MP3 music on my USB drive
3) Use the USB Modem / WiFi lead to go on the internet
4) Will my Bluetoth STILL work / steering wheel controls
Thanks for any answers you can give but if this messes up then I have to return the unit to China which I dont want to do.
Hi,
I have a Dynavin V5, i have 2 questions:
1, My Dynavin has WinCE 5 on it, can i put WinCE 6 on it?
2, Is it possible to get the bluetooth working under the Patched WinCE side of the Dynavin so you can connect it to an iphone 4s for google tmc etc?
Thanks in advance
Tony
I have downloaded this patch and like mike I can't install
the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
so please can you give me some help on this as I can't install. Thankyou
Hi,
I installed everything as told in the readme. Now I have this problem:
Every time I start pushing the navi button in the basic menue it says syntax error in a small window. Then I have to click OK (very difficult) and then the iphone screen appears.
How can I solve that?
How do I know if software 8.1 or 8.3 is installed?
I want to buy a Dynavin DVN-E46-D99 purely because of the possibility of unlocking its true potential with your patch.
Can you tell me if it will be possible to use a USB hard drive full of content with this after patching with your software?
If not a USB hard drive what about a wifi hard drive?
Also if i get the Dynavin DTV module will this still work after your patch?
Also do you know how many usb devices i could run after patching?
I think the dynavin unit has 2 usb connections (im not sure if these are already used for other things) could i use a usb hub to extend it?
you need to get wince version of dynavin :)
a hdd will work fine as long as you have external power for it
also a hub will work ok, with wifi/3g and storage device.
All functions will remain the same, dtv, radio, etc, only wince side will be unlocked and look like a pc.
Hi, I have just purchased the WinCE patch, I dont intend on using it as I only wanted the iphone software for my unit :)
I am using a unit made by A-Sure which has USB wifi, USB socket for Music etc, an SDCard for movies PLUS an SDCard for navigation... it also has working Bluetooth.
Reading through the posts / forums it seems that if I flash this patch I will LOSE Bluetooth AND the 2nd SDCard, is this correct?
nope:)
even better i think you can link all your programs to the iphone menu.
Anyway i doubt will work out of the box, you probably need custom version. Let me know.
Thanks for the reply.. I have had the iphonetoday running fine from the sdcard..
As Im not 100% its all going to work I wont be flashing the new firmware... The default firmware has USB wifi, thats a hard wired cable into the unit and also an external usn connector for usb sticks with MP3`s on it, but neither show up when they have things plugged into them yet the software on the unit sees the mp3 usb drive, strange.
yesterday i tried your patch on my nowada 2450 board, it installed with no error but after rebooting it didn't work. i've tried to update the patch, with no luck, and finally i put the "update" folder in the sd card and powered off and on, but it seemed nothing appened.
And now.....
wince don't detect my sd card anymore!!! in setup it only show the flash (with only an empty windows folder!!)
Can i do something to repair?
Thank you!
Thank you, but i think it may be an hardware issue, because i noticed that has stopped working the sd in the radio section too...peraphs i damaged one of the flex cable while soldering the usb cable.
anyway, i've just ordered a new dynavin d95 ones: can i use the patch i've already downloaded, and buy only the wifi patch for the new one?
- *** added FTDI driver support ( thanks to Haltronics for help ) and a working OBD software ( need .netcf 3.5 ). This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car !
- improved startup time
- added a new, bigger and nicer keyboard
- upgrade enabled, read instructions.
i dont offer support for connecting obd devices.
i provided the generic drivers, you must enable them, are disabled by default. I have many customers that made it work, but dont ask me what cable hardware they used...
Which patch would you suggest, please? Do you think it is possible with your patch to drive the DVD player from Win CE?
Many thanks for your support, best regards,
Petrut i need your help, i bought the patch for my device MT6501 wince 5 and it works good, but my device is not working right now and i failed to fix it, even the retailer failed, and i am intending to buy MT8001 wince 6 so is there is any way to replace the patch?
Hi, I'm wondering if the tethering can work using the USB cable, instead of using the wifi tethering, on Android and iOS devices when you plug the phone via USB the tethering is actived right away and recognised by the PC as a USB modem interface !!
will it work "out of the box" with your patch ?
no will not work. wince is not windows xp, 7, etc.
You need 3g patch and i`m not sure will work with that either, i never tested, not much interest for cable tethering.
FYI - I am working on the Flyaudio GUI customization over at the Prius chat but more interestingly your patch works with the Ottonavi on the prius site. Search Ottonavi HU: How to customize (a bit) the UI.
Also I would be interested to try your patch on my Flyaudio and recommend it, if it works. Search my thread at Flyaudio HU: How to customize the UI - 7572. PM me if interested.
hi, i saw your posts on forums.
I`m happy that it works, i could add it to the compatibility list:)
And i think my patch is the best of all unlock solutions, because is SAFE and works out of the box, no need to tweak, etc. And i offer full support, custom versions, etc.
For flyaudio i made some time ago a custom patch and worked fine, but NO desktop and no wifi, 3g, etc, because their usb port is not connected to wince side.
if it worked, there is absolutely no reason not work again.
If you have the firmware for your unit, please reflash it first, then wincepatch (latest version form your account) then wifi patch.
Hello Petrut acquired the patch 2440 Multi Platform 5.0 allowance
Windows CE 5.0 1400
45.7 mb ram
ARM920T S3C2440A 385 MHZ
480x234 pixels 65536 colors.
Which I could not install, it tells me there is preparing to charge, eh waited for several hours and nothing, it may be, it is lowered twice thinking that had been loaded wrong and nothing help please
Petrut hello I can not install wince, get this notice.
Data files missing.Please read the readme. doc for more instructions !.Press ok to exit !
who is this! what is wrong.
You wrote about version 8.3 "This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car. Which Usb TMC device and usb OBD cable do you suggest and where can I buy it.
i bought today the wincepath, and i need to know what cable i need to buy to connect my seat leon with odb to the navigation ? i have an odb with usb that i am using on my laptop did this cable will cork ? or i need to buy in obd with bluetooth ?
thanks for reply petrut, but i need to know the simple way to work, with the device Elm327 bluetooth it should work with your drivers ? and where i cand find the link with the driver ?
Hi,
I can`t instal the patch. I get this message "Data files missing. Please read the readme.doc for more instructions ! Press ok to exit !","Read the readme !!!")
What is the mistake?
I have downloaded this patch and like mike I can't install
the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
so please can you give me some help on this as I can't install. Thankyou
Hey Petrut
I have buyed the wince patch and wifi patch maybe a little over
A year ago. For the last 3 month I used a different micro sd card. Now when I use the
Sd card with the wince patch and wifi patch on it I get a error with my edimax 7711 wifi dongle
Its saying error installing my wifi dongle every time I open the patch on the dynavin i have unplugged it many times but still no luck. Opera mini is working everything is working the only issue I have is that it want me to write the name of wifi adapter and when I do its saying error installing the wifi adapter. I had it working for 3 months ago but now I can't use the wifi patch because of this error. Please help me
I have a little over 400mb free space on the sd card. I really can't get to work hope you help me
It's with wince 5.0 and it's dynavin navigation I have
Wifi adapter is edimax 7711 that am using. I had it working before so there must be something wrong
Ok, so the patch has no bluetooth support. However, the new patch is called from the navigation program link. Won´t the original functions like radio and carkit remain, so that I am still able to receive incomming calls through my carkit?
I have a CY7088, nowada 2450 board wince 6.0.
Hi there i tried one of your patches for wince 6.0 and there's an error has poped up at the installation process that the patch couldnt create program files folder in my sd card. i took a snapshot for the error message and another one for my navi system
I buy a camper with a car dvd player 1 din 7 inch with gps.
I buy today your patch, but I have a very bad problem. My touch screen works fine in radio, dvd, etc. but when I put gps mode the touch screen doesn't work and my device is a car dvd player without keyboard!!!
I read a lot of hours in internet and at final I found your web and people talk very well of your patches. I buy your patch and I read your blog about to reflash wince 5.0, You talk about this link http://www.mediafire.com/?mwzotnttyzy and I download "winceenglish480x234.zip". I put in my sd card, I switch on my device and the device update well but the touch screen doesn't work. I don't know what to do, can you help me? How can I install your patch? I need touch screen in wince 5.0. I thank you very much if you can help me.
My device is
SCREEN: 400MHZ
CHIP: SAMSUNG S3C2440A-40
ARMV4I
WINCE5.0 CORE
64 MB EMS MEMORY
7 INCH TOUCH SCREEN
1. I have your wince patch and wifi patch. All is working besides I can’t use Internet Explorer. Opera is working good. IE does not load web pages, always gives white screen. I have tried to reinstall your patches and play with IE settings but it gives no result. What could be wrong?
2. Is it possible with wifi patch to save wifi settings and can it somehow show which networks are locked and which are free?
on wince 5 is not possible to save wifi settings.
also internet explorer is not working on dynavin, i have no idea why, anyway is so bad that doesnt worth the trouble.
Sorry - I thought the flash was for all-chinese - I just reread the flash instructions and flashed the V5 and all is well - look forward to the WiFi Patch.
Great site and great job on the patches. Just bought the nwd2450_CE5_800x480_dynavin patch for my V5. Followed instructions and everything worked great - except many of my menus appear to be in chinease. I want to buy the WiFi patch but want to get this issue addressed first - thoughts?
I have a unit for my car Mazda CX-7. I installed Miopocket 4.0 and now the navi function not work. I can't run the resinfo on my unit so i don't know, what kind of unit I have, but I have another original multimedia unit for Volkswagen car type what is from the same manufacturer, same gps menu, same functions, pics... I can run resinfo on this other VW unit and I read:
Nowada_2450
NWD_2450 mulrimedia platform 6.0
Windows Embedded CE 6.0
111 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
I haven't got the original firmware for my Mazda unit, but I think the other firmware of the VW unit can works on my multimedia too. Do you think?
Or what is your idea, how can I repair my unit? If I buy your patch, it will work?
don`t reflash firmware from other units. Touchscreen drivers are different, and touch will not work. send me complete details about unit, i have many firmwares, of course you need to buy the patch.
yes to all your questions. When you press navi button you`ll have access to my patch, iphone interface, etc, you can multitask applications, connect to internet, etc
Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please
Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please
please tell ús what we need to buy and do to have obd on dynavin d99 wince 6 bmw 320 i e 46- and what to buy for tcm usb support and how to get live traffic at igo primo thanks mike
i have no idea. I have users that reported that obd works fine. You need some usb obd2 cable and patience to make it work with my drivers and software. I can`t help more, i just included support for them. For live tmc, use igo primo with a tmc license and a sys.txt entry, you can find it somehwere in the comments, search for it.
Hi, I have the D-link DWA 140 wifi dongle. Almost every time I use it, it does not load up anything for wifi on bootup. If i take the dash apart and unplug, plug in the adapter then it pops up the window for choosing a wifi connection and everything works fine. Do you know how I can fix this? Thanks again.
Hi, just got the patch for wince 6 and need the english file to reflash the system.I have the Dynavin radio unit. I also have installed HOBD and have a usb obdII adapter ive connected into thew Dynavin USB board but some dialog box comes up in chinese asking me to do something and the obdII contoller wont load!
Hiho,
I'm a very proud owner of a Erisin ES778 (ES777 with DVBT). My understanding is that the headunit is on WinCe, while the PAD has Android. I love the combination, but to get the most power out of it, I'd like to unlock WinCe.
Hi Petrutms,
I have another question about my AS7609 with sinoembed gps board gb108a.
I am making the USB mod.
I have connected the red wire to +5v, the white wire to the pin 10 , the green wire to the pin 11 and the black wire to 29-30 pin.
All seems to be well connected. I have install your patch and I have access to windows desktop but when I plug a pendrive, a keyboard, a mouse or another device , it does not work.
My question is:
Shall I have to do something more in the board, as putting some jump or resistor?
Hi Petrums,
I bought yesterday the wince patch 6.0 for AS7609 and installed it with no problems.
I have the same problem that Charalambos Constantinou ,i cannot find out how to enable onscreen keyboard in wince.
I have calibrated screen with a pen and how you said;
reflash my system, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.
Hi Petrut,
I think , I have found the solution,
I have changed "NandFlash" for "NFlash" in the cekey.reg file, the three virtual keyboards work now.
Thanks you
Hello I have an ES848V Erisin 2din system whose GPS gets stuck to 'No Signal'. At Erisin they're telling me that the GPS module must be changed.
I can't get the information required since there is no way for me get into WindowsCE.
Would WinCEPatch work - and help?
Many thanks
I purchased the Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480 patch but during downloading firmware the system crashed. I checked the SD card afterwards an i think the files were corrupt on the SD card.
I cannot access the navigation console screen anymore. I think the CE installation is gone. Is there a way to restore this....
not possible. wince 5 is safe. Unless you flashed with wrong firmware for wrong unit...
Anyway remove power from the unit for 1 hour and try again with a good sd card.
Nice work - I paid, downloaded and installed yesterday. Instructions said:
"Don`t reflash system if you already have english language in wince, and don`t flash firmware files downloaded from different sites unless you know for sure that are 100% safe."
So I did not reflash firmware - mine is already in English. But my iPod and BlueTooth interface are not very good - if I reflash firmware, would I get a better interface?
iPod - difficult to select songs lots of scrolling, no quick way
BlueTooth - no phone book! I want to import contacts
Also iPod and 2nd SD Card are not available in Windows - I can not see them in file explorer
oh... ok, thanks for your reply (& I still think you done a great job). Do you know if anyone else has been flashing the firmware for these "Chinese 2-Din" things?
Hi, I received a recommended wifi adapter and tried the rear usb on my hu and everything works! For the most part I would like to use the main shell rather than running directly in windows, but i would rather use opera mini than IE. Do you have any ideas how to get the main shell to launch opera mini instead of IE? Thanks again.
Install the patch however storagecard/programs/desktop straight goes to iphone theme and from there i cannot change to desktop mode. how do i do it this is because i need to go to system tools since i need to do gapi fix. Thanks
I had purchased and downloaded your very first release of the patch quite some time ago. Seems like many changes were made to it. Is there an upgrade I can download or must I purchase the patch again?
I patched my Erisin unit with this patch. Main issue is that using a media player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add).
petrut you were looking into it. Any solution yet?
Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and click ok the same screen is back.
Intellinet 150N adapter I get no screen driver name no
Wi-Fi is not working.
Wi-Fi working when I do this;
I insert first the Linksys WUSB100.
I close the driver screen.
I take out the Linksys WUSB100.
I insert the Intellinet 150N (new model)
I get Wi-Fi settings screen all working (WEB,WAP,WPA2,PSK)
I don’t get driver screen ?? and al is working Why ???
I think I have found some solutions to my problem, but is there a way to restore the D99? I have got an extra Map called StorageCard and I can't delete it even if there are no relevant data on it.
Kind Regards
Rolf
I have installed wince patch on a new dynavin d99 and the installation was done without any problems.
But the the lack of sentitiveness and respons from the screen in Iphone daily is close to zero and make the solution more or less useless.
Hi just bought hack wince 6 for the newest dynavin unit with d99 dont know if wince is in english or not how can i find out? what happens when wince is already english and i install althogh? greetings mike
Hi, i downloaded your patch, my hualingan head unit has the nowada 2450 board and running on wince 5. I wanted to know if there is a way that i can play my ipod songs once im in the iphone today applicaton.
Hi, I purchased the wince and wifi patches a few days ago. Everything worked perfect with the WinCe patch. Thanks. However, in the WiFi patch I followed the instructions and submitted the necessary information to you and am still awaiting a response.
Thanks, you are awesome! I am awaiting delivery of one of your recommended WiFi dongles. My particular radio has 2 rear USB ports and one in front with an odd adapter cable. Should the rear USB ports work for the wifi dongle or do I need to follow your tutorial to splice in a usb cable? Thanks again!
I am interested in buying your patch, but I am from Lebanon and unfortunately paypal cannot be used from my country. is there any other way to make the paiment ?
Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and clik ok the same screen is back....?
I have a Dynavin D99 ver6 wince 6 is de driver rt2870.dll ok??
Where can i buy a working wifi adp.
Petrut,
I have installed winpatch 8.1 and your wifipatch. My adapter seems to be working fine. The problem is that all of my windows menus are in Chinese. I am finding it impossible to get this finally set up and working. Can you help me???
you have wince5, there is no noew patch for wince 5. The firmware links from readme first.doc are working fine. Don`t reflash if everything is working fine.
I just want to get rid of the Chinese menus, Do I have to re-flash to do this? And does that mean I have to reload everything (wince55 patch) and (Wifi patch)???
I just would like to confirm is this HU model AU-V8046GD by DYNAVIN wifi competible? What i mean is the usb port is ready for wifi/3g modem without hardward mod?
This is because i plan to buy this HU and also with your patch.
By the way, one strange thing, the bluetooth works only for calls, but not for music.
Will the patch help me with that?
Please NOTE that a processor is a MIPS.
I have the AS-7608 V5 unit. The unit runs win ce 6.0, and it looks like the first screen on your wince 6.0 download page. I bought the patch, and it installs correctly but I get an error when trying to run desktop.exe. It says something in chinese...
The window title that pop ups with the error is DESKTOP.mscr. The body of the window is a bunch of chinese characters with the word DESKTOP in the middle.
Hi, Petrut.
Your wincepatch has working great for a two weeks.
3G modem was connected automatically after the "connect on starup" was checked in wince sys tools.
But now a message "error from rasdial" is shown up, and it's possible to connect my 3G modem only manually.
Perhaps the reason is I tried to setup bluetooth dongle (without success) for OBD software. Can you help to get back "auto connection on start up"? I already several times tried to check "connection on start up" and reboot. No results. :(
Igor
you messed with the system files... it says clearly that bluetooth obd is not supported.
Best solution is to reflash system with firmware ( if you have it ), or manually delete all registry/drivers you added during experiment....
The WinCE 6 patch is working great! And even the reflashing of the firmware was no problem.
But now I've got two questions:
Is it possible, to adjust the whole display a few pixel to the left? I don't know why, but my disply is about 5px to much to the right (everytime, within wince and within the programs). So when I try to close an application, it is sometimes hard for me because even with a pen I can't reach the [X] in the upper right corner of the programs. And with a recalibration I just can recalibrate the cursor, but not the display... Is there a solution for this problem?
And the second thing... is it possible to have a clock always on top (while using the apps)?
Thanks for the tip, now it works! But now the clock is always switching back to the chinese time zone, even when I switch off the auto-update in the windows settings. do you have an idea for that?
Hi Petrut,
I have a generic Chinese Win Ce 6.0 GPS unit for my car. it is the usual all in one device with bluetooth etc.
I sucessfully installed mio pocket-mini and have unlocked the device. The mio .exe is run directly from the SD card.
The problem I have is that mio mini does not come with bluetooth interface for use with my phone, i.e. dialer, contacts synch etc..
Does your solution allow contacts to be synched? Also does your MP3 Player allows the use of playlists?
Finally, I also have a strange issue. The original shell on the unit is fine except for the fact that only the MP3 music plays via the car speakers. Bluetooth phone and GPS sounds are routed via the crappy in built speakers in the device even though it connects to my car via a quadlock connection. There is no way for me to change these settings, and even looking in Win CE settings I cannot seem to change this. Will a custom solution from you fix this?
Hi Petrut
(is the ONLY one that fixed the biggest problems on wince 5 units : losing all data after reboot !!!)
sorry but how can i do dies ?
thanks !!
I wrote you an e-mail yesterday concerning my problem that my car rns doen't start after the miopocket installation (the same problem that was already several times discussed here in the blog).
Did you get my mail?
i read in your blog, that you have a firmware to reflash the device, in this case i want to try this and want to use your wince patch as well.
because my gps was already in my car when i bought it, i have no information about it. but i found a link with some pictures: http://www.alibaba.com/product-gs/492475670/2_Din_HD_Car_DVD_Radio.html
the device AND the software seems to be the same, but i'm not sure about if it is win ce 5 or 6... can you help me, please?
you are correct it was there installed perfectly once i read it. thanks!
any advise for switching btween igo primo and the music player. would i have to shutdown gps and start mp3. if so can music from wince play while gps is loaded?
I installed your Wifi patch on my 8.1 winpatch Dynavin Ver 5 setup. When I installed my WiFi dongle a box pops up that is mostly in Chinese but I can make out "usb". I have no idea what to type in there.
My dongle is a Keebox W150NU. With a Realtech 3070 chip.
Petrut, I am running a Dynavin WinCE5 (v5). When I start up my IGO Prime Nav Program I get a request for my GAPI selection. There is none. What is the work around for this? Thanks
I'm an owner from a year or so ago. I downloaded 8.1 a couple of months ago. Possibly i need the latest DATA file. Maybe the one I'm using is missing GAPI Fix ??? Where can I get the latest data zip???
hey guys i have a performance teknique ICBM-9706 i got from china i have been looking in alot of forums and stuff to see if i can make this 2 din boot wince can you guys help me thank you
I bought and downloaded WIN CE6 Patch for Nowada 2450 Boards, Version 8.3. I installed it on AS-7608 V5.
But I only could install the WINCE-Patch. There was no firmware for WIN CE6.
On the desktop I can see the language in english, but I got still some chines messages for new USB-device.
Is there any way the change the WIN CE6 completely to english?
I've been struggling for a while on my new 2din navigation system and of course I arrived to your web!! My problem is that I want to have an external screen with the GPS on it. The video-output does not show the GPS (even on 2-zones mode).
Could your think about something for this??
I tried extracting the signal from the Nowada board directly (thanks to your tutorial info) but this is not possible/direct,..
I guess that your patch has nothing to do with that, am I wrong??
I've just updated my Erisin unit with this patch. Fairly happy with it. Only two issues I have are
a) can't get at the WINCE front end desktop (Petrut is looking at it) and
b) using a player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add). Text to speech seems ok in Igo Primo though going through all speakers so it can work
Mi-am facut o mufa USB mod si am incercat prin ea, se pare ca nu vede, nici wifi, nici storage , nimic nu misca ! doar ca si conexiune cu PC lucreaza . Nu lucreaza ca host sa fie o treaba hardware sa se mai poate face ceva?
Salut, eu am un GPS allview 8802 , e cu win ce5 am instalat pe el MioPocket 4.0 ,merge oglinda! Daarrr, imi place sa sap prin el, oare wincepachul tau merge pe el ? e MESADA 2413 , 43,8 RAM,ARM960 s3c2413, la 320x240 65k culori,NANDFlash 914mb, ce am uitat? aaa... vede sd pina in 2 gb si are iesire mini USB, mi-as dori sa pot pune wifi sau 3g, oare merge?
hy there.i just want to ask you about a ES868GBP product with wince6.0.The motherboard is AIVCE6_NANO_REL1.03, Windows CE 6.00.3122, 117.8 MB RAM, ARM1136JF-S AT840, 800X480 PIXELS, 65536 colors.I would like to know which patch would work for me.The main shell looks like the second picture( http://www.golfmkv.com/forums/showthread.php?t=107203), the one with blue(navigation, e-book, music , picture).10x in advance
P.S. : i don't want to look silly, but are u a romanian?(by the name Petrutz).I'm waitting for your reply.Cheers
Dear Petrut,
Please show the Structure of SD card after installing of patch. I put my navigation software and wince together on SD card but I don't run any navigation programs. but if I put only wincepatch on SD then I see program icon after startup of desktop. So what is going on.
i don1t understand the problem.
you installed wincepatch,OK
you put some navi software on same SD, OK
then use system tools/shortcut creator to put valid shortcuts on desktop, or edit icons path in iphone menu if you want to use iphone menu to launch apps. Instructions in readme first file.
Hello,
Yesterday, I just bought the wincepatch
>
I've a TID7501 with WinCe6 /Novada 2450/800x480
I've just install the wincepatch with no issues but when I launch the desktop.exe I get the famous error:
There is no application associated with 'Desktop' run the application first....
Do I have to install any firmware ? If yes, where can I get it ?
The Structure is as follow:
FLASHDISK
My Documents
Profiles
Program Files
SorageCard
Temp
Windows
chinees signes (I think a shared folder)
chiness signes .lnk
Do you need a Picture of the deivce, I found two devices which looks similar : HASDA H-988 and OMT-8243
I opend the device, i have two mainboards and no clue which one should the usb be soldert to.
Can I send you the two pic and youb tell me which could be nearly the mainboard ?
On one ( where the pgs is) i found a 5 pin with description GND, ILL, XD, TX, RX. Could be there are some more letters on the ending but the connector is covering them. Is this usb?
read tutorials please, there are pictures there.
the gps board is the one with the gps antenna attached, usually a small board.
you can buy any pathy on my site and request by email a custom one, that will be sent in 24 hours.
My unit is (I believe) a smdk2450 board with wince 5, the letters on the screen are so small that I can't read it proper.
My only problem is that I have build “by myself” an USB-TMC and I have the drivers for it and the unit has a USB Port at the front, BUT, when I plug in to the unit a software is automatically starting which is a player for USB Sticks.
I can't get the popup for installing new device driver. How can I disable this annoying software, so that the OS driver screen can pop up? And how can I change the resolution on the unit?
Hi, I have a XTRONS TD717G.
BSP Version AIVCE6_NANO_Rel1.03...
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
What patch do I need for this unit?
I opened my HU to mod an usb cable but I found already usb connector on printplate of HU.
1) what is that? wherefor can I use it?
2) how can I tether with HU?
best regards
hi i have a gps unit says toyota. it has wince 6 but dont have any maps or software on it. Also when i click on gps nothing appens. looked on gps path and it says something about igo and storage path. also wanted to know if i can swith form were the maps are located (use the other sd card slot or usb port) because previous owner said sd card for gps is not working. and if you have the maps? thank you
Hallo,
i have a Maxyon Energy 2DIN Device.
NOWADA
NWD_TT4X0A Multiplatform 6.0
Windows Embedded CE6.0
93,7MB RAM
ARM1136JF-S TT4X0A
800x480 Pixels, 65536 colors
BINFS: 76,6MB 76,6MB used 0MB free
NWDFlash: 5,04MB 1,01MB used 4,03MB free
Program memory: 92,7MB 23,1MB used 69,7MB free
Storage memory: 1MB 68kB used 956kb free
Hello Petrut, I am wanting to get the patch for the NWD2450 win ce6, but the unit i want to install to has had a failed attempt of mio..... on the startup of the Nav screen, ( once i press the Nav button from the menu, the system hangs on the "welcome to Navigation System" screen. If i get your patch, will this be able to be installed, and repair firmware of unit?..
I opened my HU to mod an usb cable but I found already usb connector on printplate of HU. 1) what is that? wherefor can I use it? 2) how can I tether with HU? best regards
trying to paste screen shot of the frozen screen, but no luck..
its a blue screen, words "Welcome to Navigation System". has frozen on this screen everytime i attempt to start the nav system. the Mio install log said install complete, and then froze on this screen.... hope you can help, ( and your patch looks better!!! wish I had of found you first!!!
Hello Petrut,
i have an AV601 from Auvidio (wince 5)without TMC.
Did you know about it?
i need a wince hack and the Wifi adon.
Best wishes from Germany
I have a China RNS, never looked which WINCE is in (I assume its Wince5). Now when I press the NAVI button, the screen remains dark. I opened the unit and the GPS module looks like a Nowada 2450. May be the content of the flash memory is destroyed or may be the hardware of the GPS module is dead. Is it possible to load your wincepatch also, if the GPS module does not start?
I was wondering if I could do the usb host hack on my unit.
Resinfo.exe shows a Nowada 2450 running WinCE 5.0, but the motherboard seems to have the gps unit implemented on board and not as a separate card. Looks like this one: http://img846.imageshack.us/i/img5545.jpg/
Thanks Petrut, that module is on the top of this new picture. http://img193.imageshack.us/img193/7665/imgp0878medium.jpg
The gps cable however connects on the motherboard at the botom left part.. The module itself has a small wire like antenna (5cm long) attached to it and no identifying marks at the pcb.
I have the wince 5.0 patch running great on my Dynavin V5....thank you very much. I was wondering is there anyway to download Wince 5 updates or upgrade to wince 6.0 on my system?
Hi.
I have a new Erisin ES818G one din unit and im wondering if this will work for it?
Also will the Track Next/Prev work with the new audio player or not?
It looks as if I have reflashed the english language firmware as all I am getting now is square boxes instead of words is there anyway of getting it back.
Also when I tried to install the wince 5 update it came back and told me there where files missing is this to do with the language problem.
Would be grateful for any advice.
just go to settings and change language to english to get rid of those boxes.
and about missing, files, read carefully the readme and download data files folder.
As you can guess I,m kind of new that this so Thanks for that managed to sort the first problem, with the second one should I replace the program files folder already in the wincepatch 5 folder with the new one or should I exract the folders from the other program files folder and pasted them into the folder in the wincepatch 5 folder.
I've just downloaded your patch for wince 5 and after reading the instructions when't to download the firmware update but the site is down so was wondering where I could get the firmware update to change it to english.
I recently bought a VW 2Din unit for my Seat Leon, it works great but I cant change the logo, the logo button in th setup doesn't work. Can your patch fix the logo or let me change is? any extras unlocked would be great, Im mainly interested in the logo change, here is my unit details:
Nowada_2450
Windows CE 6.00.0
111.3 MB Ram
ARM1136JF-S AT840
800x480 pixels
65536 colors
Greetings Petrut,
I am new to your blog and I would like to purchase your patch. After running ResInfo.exe on unit via SD card I have Dynavin E83 with following Info:
[Mesada SMDK6410 6.0 / Windows CE 6.0 3122 / ARM1176JZF-S S3C6410 (666mHz) / 800x480 pixels / 65536 colors]
Some issues I would like to resolve are:
1) Change WinCe to english.
2) Use iPhone via USB cable to unit.
3) Play navigation audio/text via car audio.
4) View/play mp3 video.
Please advise if you have a patch available for my units OS and if some of my issues can be resolved.
Many Thanks.
Regards,
Jimmy B
Hello Petrut,
Disappointed to hear.
Everywhere I read you said you have patches for all Dynavin,s. If not you would create one.
So, there is nothing we can do?
At least can you help me to change WinCe to English?
Thanks,
Can you advise or direct me, how to resolve usb connection with iphone. Wince window pops up in chinese. Is it looking for a driver? How do I start the onbord keyboard to enter data. I have no problem connecting to memory stick or ipod. I have wrtools, resinfo, cecmd on sd card.
Thanks,
Thanks,
Hi I had acar dvd gps (Kia Optima 2011 K5)
Ver: 112D-112D-6026-110213(Windows@Ce 6.0)800×480
Storge memory:113508 KB
Available: 94660KB
With steeering wheel set and bluetooth
Which patch work with it and how can i use 3G and internet with it,Plz replay on my e-mail
Thanks
Hi Petrut!
I own a China Din 2 Navi Radio Name: MFC-7001
Will your WinCe6 patch work on it? Do you have a complete patch wich the Wifi patch for using my Samsung Galaxsy S2 as Modem to get into the Internet?
Tanks
Petrut, I purchased WinHack and Wifi back in october 2010. I had my EW-7711 wirless USB working with my phone but I had the SD card crash so I had to redo everything. I have Dynavin V5 with WinCE 5. WinCE keeps asking for the driver name when I plug in USB wirless device. Suggestions?
I've just found this place, nice job.
However i've not found the infos i need, so i ask here.
The FLAC support on the new audio player does use playlist and / or .cue format files?
FLAC support is only stereo or can do also multichannel FLAC? If this is specific to some model only, please give me a hint. Thanks.
I have a question: where to locate the 3g modem? If the modem is hidden in the glove-box, and receives GPRS/EDGE signal the speaker make characteristic "tidit, tedet" noise.
I'm very interested in your patches.
I currently own a Eonon G1301 ( http://www.eonon.com/Car-GPS/1-Din-Car-GPS-DVD/G1301.html) which according to ResInfo is using the Nowada 4250 board.
The system is WinCE 6 and seems to be in English (haven't seen any kind of dialog in Chinise). My mother language is Spanish.
Now the questions:
1) Is this device compatible?
2) What would I need to buy from you to have the system as most as up-to-date as possible?
3) I would like to perfom the USB-mod to have 3G Internet access and I would like to know if it would be a better idea to solder a powered usb hub (and taking power from the car battery) to plub more than 1 device?
If there's any information missing let me know. You can see the full details of the unit on the Specifications page link.
yes, this is perfectly compatible with my 3g patch.
Just buy wince 6 patch, item 1 from wince 6 section, and 3g patch, and a huawei e1550 modem for 100% compatibility.
And no, dont solder hub, just an extension cable.
Here in Argentina I can get the 3G Modem Huawei E176 HSUPA USB Stick. Do you know if this model will work? Also, could you please explaing a little bit more about "online TMC"? I couldn't find anything on the Internet.
system tools app for 3g connection.
igo must be added manually in desktop.mscr from program files/desktop, after the line with iphonetoday. If you know a little about computers you can do it.
Hello,
I have a AS-7609 by Audiosources it is based on wince 6.0 Nowada 2450 board, I bought a patch for Nowada 2450 board, fallowed all instructions in read me file, First I applied the patch, thinking that i have a English WINCE but I was wrong i have Chinese so I fallowed the instruction to flash wince, that didnt work automatically ( nothing happened when i power off power on and went to navi screen, so i tried runing UPGRADE.EXE from navi screen, it went thru but then i applied the wincepatch pointed GPS to Desktop.exe and when i click on GPS i get an error in chinese it says something about DESKTOP.MRC please help
Hello Petrut, It has been a while since I have followed the info for the Dynavin I have a v2 or v3 Dynavin in my e46, what do I need to purchase to for the latest and greatest?
Hi, Petrut.
I've installed Mort Player by .cab files in my DVD device, but it doesn't work. It appears an error window, but in chinesse. My question is, if I've already patched my device with your patch, can I reset it (point 1 in your README 1ST tutorial) to get it in english?
Thank you. (Please, excuse me for my bad " english").
mort player doesnt work correctly on chinese devices. It needs .netcf 3.5. Even if you install it correctly will be slow and menus will not fit screen.
Anyway english firmware links are in readme file when files are available and safe. If there are no links, no firmware, or not safe.
Before I buy your WinCE6 patch, I need to ask if the patch can enable my All-in-One in-car unit to read SDHC cards. This is the main reason I want to upgrade.
Unit info as follows: -
Nowada_2450
NWD_2450 multi-platform 6.0
Windows Embedded CE 6.0
ARM1136JF-S AT840
800x480 pixels 65536 color
Program Memory - 110MB
Storage Memory - 1.0MB
NWDFlash - 1.98MB
NandFlash - 54.7MB
Hi, Petrut!
I have installed your patch and it works perfectly in my car, but, when I shut down it, then I start engine again in a minutes, and DVD starts on original dispay, original firmware again, I must start desktop mode by clicking Navigator icon again. Is it normal? And sometimes, Mp3 player doesnt remember the last song that it played. Is this a standby problem or I did something wong?
The navigation apps dont work.
Thank you.
yes is normal. the unit will always go in radio/dvd mode, and you have to switch to gps mode.
I have no idea about the mp3 player, it should remember last song... try naviplayer not nitrogen.
Also there is no navigation software in my patch, only icons, you must link them to your existing navigation software. read manual about how to do that.
This is the Resinfo out:
under System tab:
BSP Version: AIVCE6_NANO_Rel1.04...
Windows CE 6.00.3122
115.3 MB RAM
ARM1136JF-S AT840
800x480 pix
65536 colors
Do you think your patch will be applicable in this unit ?
If you need, I have a install image of this firmware/software.
Hello!
I'm spanish, and I've got a Chinese DVD in my car. It's a Nowada 2450 with Windows CE 5.0, and I'm interested in your patch, but I have 2 questions:
1- Will I can to use a MP3 player with equalizer? I'm interested in this, my firmware has a mp3 player with only bass and treble regulator.
2- I play music from my SD card, and then I stop my car and take my key. When I start my car again the mp3 starts from the first song of SD always. Will your patch fix it? Will MP3 player start from where it stopped?
Thank you very much, and please excuse me for my "English".
yes to both questions.
BUT, this will work ONLY when system is in gps/desktop mode.
So will play only mp3 from gps sd card, using the software provided. Existing built-in software will always be the same.
ok..my device has Fm radio, dvb-t TV, gps, bluetooth. Do you have any suggestion for the software which can control that?
in the meantime, after 5 emails manufacturer send me new firmware. I try to boot my system with this new firmware via my SD card. Nothing happened. System is still booting from the windows root. How can I avoid that. Thanks
I recently bought (last night) the wince patch 6.0 for AS7608 v4.2 and installed it with no problems. The only problem is that i cannot find out how to enable onscreen keyboard in wince. Can you help me ?
make sure you have the screen calibrated. In desktop mode, in bottom right corner there is the keyboard icon. Also set taskbar always on top if you want to use keyboard in office apps.
Also keyboard will automatically popup when needed.
i have no idea.
i`ll investigate the issue.
Until then, you can try to reflash if you have the firmware, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.
I tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?
I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.
Perhaps a strange question but i have a roadrover headunit and am trying to get WIFI working. It runs on CE6 has USB ports and i have a RT3070 Wifi USB stick. When i plug it in de unit asks for the driver. I also installed the Ralink 2870 drivers. When i give the path to the RT2870.dll the unit does not accept it. Will your Wifi Pach solve this?
The patch installed correctly (I think) except for the *illegal software* message after the reboot at the end. Not sure if there was any damage but I was able anyway to launch IPhone and most of the apps seem to work. Really nice!
From some app, I'm able (sometimes) to access the desktop and the task bar. So I'm really happy for all that.
3 questions:
1) Could not see the keyboard anywhere.. Is it gone because of Flyaudio?
You mentionned earlier Internet drivers not compatible with this unit...
2) Still, does the USB mod will create a usable USBHD in WinCE?
3) What would be required to make the Wifi works on this unit? (in theory at least)
Hi, Petrut.
I've installed wincepatch on XTRONS td717g. Evrth is fine, except taskbar on desktop. It's always hidden!!!
I tried to resolve this problem by editing file "registry.reg" from winpatch distributive.
In line:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Ontop]
@=dword:00000000
I replaced 0->1, and then install patch again on clear system. Hasn't helped.
How to correct?
i think your unit wince core files doesnt have taskbar support. Even if my explorer.exe have it, if there is no support in firmware, you can`t enable it. Same think with keyboard, i found crap units ( flyaudio ) with no keyboard support at all.
Ok...
dear Petrut,please...
now I have to solve the last problem:
When I open a file with an mp3 player ... I hear the sound from small speakers of the device....
instead of the original software from Audio DYNAVIN you hear the stereo AUX ...
how do I route the sound of any player (like Core Player) to the car stereo's AUX ... ?
Please, just this ... help me!
Hello,
I have installed W2-D762CI witson in Citroen C4, with Win CE 5.0, the patch serves this model?
In such a case that offers benefits to install it?
Thank you.
I am very interested in your patch ... I have a device DVN-E83 for BMW X3.
I want to know any questions, please:
1) with certainty, I can install it on my device?
2) my device has WINCE 5.0 or WINCE 6.0 ???
3) now my wince is in Chinese, I can change it to English?
4) after I install your patch, if I want, I can return to the original, as before the change ?!
4) My main problem is read the files video (via USB) compressed with h264.
With your pach are you sure I can read and hear the audio through the AUX input of my car stereo (now with CORE PLAYER I hear only through the small speaker DVN-E83!) ?!
I just tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?
I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.
Is it work with Witson w2-d745p ? Can i use the internet function from my smartphone ?
Another and important (for me) question, the device is installed on my Peugeot 307 and i lost the access to the cars computer (adjusting time, etc), i know that there is a newer firmware that corrects this problem, giving access to the computer from de SRC button (pressing and holdingo on the wheel control), do you have this firmware or can recommend me someone who has it ?? Thanks a lot !
My sistem:
Nowada_2450
NWD_2450multi-platform 6.0
Windows Embedded CE 6.0
111 MB RAM
ARM1136JF-S AT840
800x400 pixels, 65536 colors
I used the device with version 7.8 (upgrade not to make). Step 1 "reflash" i did as is written in "readme", but the system automatically wasn't updated. Therefore has passed to a step 2. After installation WINCEPATCH at start there is an error:
"EndForEach" without "ForEach"
Line 26 (\NwdFlash\$MSD$\App\memoryadjust/mscr):
EndForEach
It can occurs because of overflow NandFlash? (info from "Tools ResInfo":
NandFlash 1,82 MB
1,82 MB used 0 kb free)
I have the same problem as described another user on another forum:
I have a Chinese all-in-one Witson W2-D745P car GPS.
I have run MIOPocket 4.0 setup, but it got stuck to : "Attempting to reboot device".
I then powered off & on the device, and the result is that the gps menu loads forever & nothing happens. (All other functions work: radio, tv, dvd)
- And the bad thing is that I am not able to access file manager or something similar to repair the registry. I' m guessing it's the registry MIO changes that did the damage.
These devices actually store all registry changes but don't change anything in Win or other folders.
I have the same problem as described another user on another forum that has posted here:
2-this device comes with usb and ipod cable that i extended in the car drawer.. will this usb and ipod cable still be working ??. i mean when installing the patch will the wince still see those connections??
3-what exactly do i have to do to get internet after installing the patch??
1. you need item 1 from wince 6 section.
2. patch will work only in gps mode, will not affect any of the other menus/systems.
3. you need to buy wifi patch, a wifi adaptor ( edimax 7711 series ), and solder a usb cable to gps board. There are details about usb mod in tutorials section.
I have a question. In my system (SMDK2450, WinCE5), the "StorageCard" is called "Storage Card" (with space). This means the script will not run. I started Windows Commander, however, I am not able to change the name of the Storage Card to StorageCard (because the lack of a keyboard). Running desktop.exe is not possible (system freezes).
Can you help please (it's a witson system (W2-D762CI).
The wincepatch does not work for:
Witson W2-D762CI.
I have given it up... Iphone today works fine, but all other apps crash. I think Witson has made a trick in the OS to stop us from hacking it :)
Thanks for your help though. May something clever pop up in your mind to get my system going, please send me a message.
I have just bought our WINCE patch. Congrats on a great soft.
I have a couple of questions:
I was looking forward to resolve the igo bluetooth integration problem. I saw on golfmkv forum that it was resolved in this patch.
However i still can´t make igo go to phone app when somebody is calling. When igo is running, i miss all my incoming calls. Can it be fixed?
This is my main problem, that drove me to buy your patch.
Total commander explorer does not see my media sd card. Therefore i cannot select mp3 files in your mp3 player. Or create a playlist. How can i make your software detect my sd media card?
Here are my specs:
Bsp version: aivce6evb_rel1.00.5.02
AT8X0 6.0
Windows embedded ce 6.0
117 mb ram
ARM1136JF-S AT840
about your igo issue, that depends by the main firmware, not the gps board. really strange, i never heard of such problems. The unit usually switch to bluetooth when you have an incoming call.
Also the patch can see ONLY gps sd card, and usb conencted to gps board ( usb mod or built-in on dynavin ).
i had purchase your wince patch. i want to use elm327 base USB cable. It use ftdi serial driver. I try to use the driver inside Program Files but when i plug in the ftdi serial to usb, it keep on asking driver name. I'm using maisun mt-6501 window ce 5.0, thank you
ftdi driver is not yet supported for wincepatch on wince 5.
it will be available soon. If you have the driver, just add it in storage card/program files/windows, and the regsitry for it in nwdflash/msd/app/registry/custom.
Will your patch solve my issue? GPS software will not load, just keeps resetting. I have a Maisun wd6050 was working fine until a few months ago, starting freezing up saying out of memory, now won´t load at all. Everything else on the GPS side of the unit seems to be working. Thanks.
Hi
My Problem is the installation from Wince patch/ EXE . If I put the Buttom to Install, than it comes the Windows for INTSTALL NEW or UPGRADE. Nothing is going on, but it becomes a new window with the note--- files are missing, please read- readme.doc. And now the question..... where I find the readme. doc.... or..... what can I do? The download was correctly from wince patch, but the Dynavin 4.V , Motherboard Mesada 2440, in my car, does not find any files and cant loading anything by new install.
Mr. Petrut, I did tried out your last suggestion (just touch the \StorageCard\NWDSoftware tekst), but it don't go away. The software I use, do like accently as: wince 5, Nowada 2440 boards, 480x234. If I go to next step, it says: \Device, but still no "Root". May I ask you to please advise?
Mr. Petrut, how do I reflash? Do you have a program to reflash it with? Do you maybe another program that I can Use? Please advise if you will. Kind regards.
Mr Petrut, I did look for several hours on internet, also on golfmkv.com, but I can't find the threads to reflash. I put the files on a 256 Mb SD-card, but can you please tell me how to start the card/ the software. Kind regards, Alex Blokker
extract all files in root of sd ( autoupdate folder and nwdtcali.exe), insert in gps slot, power on, switch to navi, wait to update. if update doesnt start try again. if still doesnt work, nothing i can do. Remove sd after a successful flash.
Is you product available for the Zenec NC2010. I notice with their V10 WinCE 6 firmware they have bootloader access through the SD_Card with the following files.
Bootc8.nb0
Logoc8.JPG
Nkc8.nb0
After booting from the SD card it then updates the OS, application etc from files on the USB stick.
patch is not working on this model.
Eventually i can make a custom one but only with iphone menu, not desktop mode. All other features of patch should work fine.
I send your the edited patch by email, please check.
kbdmouse.dll is already registered in HKLM\Hardware\Devicemap\Keybd\
I’ve tested 2 types, there is a sound reaction when a hit a key, but I cannot type.
Hi, I need help.
When I push NAVI button on my Mesada 2440 board 480x234 WinCE 5.0 (WinCEhack 8.0) an error message appears ("MSKBoot create file failed"). If I close window, there's a new window Sysupdater, I can use touchscreen and navigate on gps sd card folders but I don't see executable files. If I close Sysupdater I see a blue blank screen.
you probably did something wrong with internal files and corrupted internal memory. You need to reflash. Or try to long press on that blue screen and tell me if a menu appears. Usually that screen is the default locked nowada desktop.
sory petrut, im annoying again, what site sells the GPS board??? nowada no responses , mesada no responses, , ebay , deal extreme doesnt exists this board... again , excuse me for the english . greets
Okay it's me again. Now I've got a bigger problem. I did'nt get any gps signal after the WinCE Patch. Perhaps 1 but after some second it freeze. Is the patch changing anything of the gps???
Dear Sir, i do have a "Chinese Unit" with no GPS "Root" anymore. This happend after a (long) use of the reset knob. There some tekst that says: /StorageCard/NWDSoftware.exe. Do you know a way how to restore this? The GPS processsor is a Samsung High performance processor ARM920T.
I do try your suggestion, but it wont work. The tekst will not go away. If I go to the next step, there is in the upper left corner the following: \Device, but no "Root"or folder present.
Kind regards,
Alex Blokker
Hallo,
I bought just today the Wince patch for Nowada 2450 WINCE 6 - 800x480. The installation is quite easy, well done. But I have a big problem: I don't get any sound out of my speakers. I have a VW7086 with the newest firmware. What can I do??
Bought the patch CE6 today, all ok. Only thing i wonder about is upper list in the iphone menu. Can't you make the round circles for gps, media and so on larger. Almost impossible to hit them right.
Hi Petrut, I installed wr-tools resinfo. wince now useable. ITaskmgr not working. MTK apollo 5.0, 118m ram, arm1176jz-s
mt3351 (468MHz), 800x480. Do you have a patch for me?
Hi petrut, im very interested on your patch.. good job making it!, please excuse me for my english, but i have a problem just now with the gps ..
trying to change the wince to english , i stucked at sysupdater screen, with no screen responce , BUT, i weld an usb to the wince side (exactly explained on your excellent tutorial), when i can handle the sysupdate screen with a keyboard, i choose a wrong file... im an id*ot, now , when i enter the navi, wince just keeps with a bar , charging... i tried everyting but no responce... any solution please? good bye i wait your answer mate! :)
thats the problem, i think the bootloader is dead :(, i cant acces to sysupdater...
y have a mesada 2440 (nowada n607) gps board.. and the unit is a VTH .. any ideas? :(
I want to listen mp3 using the nitrogen player, but my dynavin e39 radio still plays songs. Do you know how to turn off all sound sources except wince?
Hi Petrut,
today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?
Just for information, I never did get online traffic to work via wi-fi. I think you need to ensure that, in Dynavin units, you have a TMC receiver as without this you will not get any kind of traffic (TMC or Online). I did try various mods. to the sys.txt but still got nothing so I ended up uninstalling the wi-fi patch as traffic was all I really wanted. If anybody out there has got online traffic to work and is willing to share their sys.txt for Igo Primo, I would give it another try!
i am 100% sure i have customers with online tmc working in primo 1.2
i`ll try to track some of them to give me more details about how they made it work.
will run all wince designed programs, and some windows mobile ppc 2003, maybe windows mobile 5. BUT ONLY some programs work, and most of them need to be extracted, patched, to be run as exe files.
yes, edit desktop.mscr and add a new line after the last line with iphone menu. Use the same syntax. I`ll post a tool soon on the site that will add stuff to startup very easy.
Hi Petrut,
Just buying and downloading "Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480".
But in the Readme file, it stated that if i need english firmware it's available at request. Can have that firmware ? Because my current Wince is in chinese language.
My Board Information is :
- Mesada 2440
- Wince 5.0
- ARM920T S3C2440A (385MHz) Res 800x480
- Have NWDFlash, NandFlash, adn StorageCard.
I have a Dynavin D90 platform (WinCE 6?) and would like to tether to my Android phone.
Once I buy the WinCE patch, could I tether over USB rather than WiFi?
It would save having to install a separate 12v-to-5v transformer/usb charger for the phone. Would be a simpler and more elegant solution for me than WiFi tether.
I have one more question:
1. Is there an easy way to change icon size on the desktop view?
2. It is possible to change background image on the wince loading screen?
I use your patch and i have a problem, i asked it before in here but still my problem continue. I dont open the virtual keyboard. ı tried all the ways but i dont do it. Please help me.
Okay Petrut. If I don't use iphone menu I need to create a shortcut to Primo on the desktop. I tried this in shortcut creator but nothing appears. Can you run through the process? Is there another way of accessing Primo without iphone menu? I can't get anything to show up on online traffic either.
make shortcut in nwdflash/desktop. It works, trust me :)
About traffic, i think you need to enable networks in sys,txt, search on forums, i csn`t help, no traffic info in my country so i never test it, but many customers have it working.
I made the shortcut okay so now I can start up Igo Primo without using the iphone desktop but it runs very slow and jerky. It didn't do this before so it must be something I have done in installing the patch. Is it possible to uninstall the wi-fi patch as I don't think I will get traffic to work and this is the only reason I wanted it. Is there anything I can do to make Igo run as it did before?
i have no idea why primo works slow on your unit.
Try another primo version ( there are many releases... ).
You could remove wifi patch ( install wincepatch over it ) and see if will be faster.
To install wincepatch again (over wifi patch) do I just go through the installation process again and choose "upgrade" or "new installation"? Do I remove all files relating to wi-fi patch first?
Hi Petrut,
Connected to the internet okay via wi-fi patch but now the Navi program (Igo Primo 1.2) keeps coming up with a memory (cache) error and closing down. Also seem a lot slower on the Navi program than before. Any ideas?
never had the issue. I have many customers with primo 1.2 and wifi working fine. DO NOT use iphone menu in same time with primo and wifi. Not enough RAM.
I have a Mesada_2443 equipped with ARM920T S3C2443 chip (Wince 5) capable of 800x480 px. Which one of your products should I buy ? Would I also be able to upgrade my OS to CE 6 ?
Everything seems to be okay apart from this: when I click on Igo Primo button from iphone interface, it says: GAPI DEVICE MISMATCH". Can this be sorted?
Installed the WinCE patch and all seems ok but I am a little confused over the WiFi patch instructions. It says to install DeviceID.exe on the SD card and then enter desktop mode and run total commander - is this AFTER i have put the SD card back in the Dynavin? How do I email the deviceid.txt from the Dynavin as there is no email without an internet connection? Sorry if this sounds silly but I am finding my way here.
Hi Petrut,
Just about to buy the patch for WinCE5 - will I need to access the USB to GPS board on the rear of the unit or is the whole process done from the SD card?
I have bought patch, it works perfectly, but I have some more questions:
1. I would like to a navigation program to run after iphone menu is loaded. I added a new run line in in desktop.mscr, and the result is that first comes desktop view, then loads iphone menu, and afterwards a navigation software starts. My question is, is there any way to skip the desktop view? I deleted the sleep time line, and the iphone menu starts almost immediately, but still i can see the desktop view ;-( Should I delete explorer.exe and startkey.exe run lines in the desktop.mscr file? Is there any solution?
2. If I set Time and Date settings, they won't save, ex. I'm setting time zone and my local time, switching of a navigation device (dynavin D90 Wince 5), then powering it on and the hour is wrong, and the time zone is unset. Any solution?
1.You cant bypass desktop view. Is essential for patch to work. Without it, no registry, drivers, etc will be imported at boot.
2.old issue, nothing i can do. You can use gps time sync program from tools in iphone menu, but on some units it doesnt work, and need to run it manually.
Hi,
would it be possible to connect an external usb sound card to my Dynavin and make it run with a driver on wince?
Can I use more then one usb devices on the plattform (usb hub)
thanks in advance!
hi Petrut, how are you? wish you fine.
Petrut, is that possible to use live tracking via wifi that conneced to my mobile phone? How to use that?
Thanks
Hi Petrut. I purchased the Wince V6 patch package, I have a Dynavin e39 whit thenowada 2450 board and ARM1136J. I followed the instructions to detail. Now I didn't know if I needed to flash or as you say reflash (the instructions are pretty cryptic on that), but anyway I tried several times and it just wont load on its own at bootup (from power up with the factory SD), so I went to the next step and did the Wince Patch install. It seems to work, I get the desktop, Iphone screen etc. NOW
it seems slower, overall, and there is no real explanation on how to make the system auto start the Navi, after going through the desktop load and the selecting the navi icon on Iphone to then load the navi.
Did I miss something is there something else I should do? DO I need the reflash ?
Thanks
Chris
first, firmware to flash ( reflash ), is not available for dynavin wince 6 units.
Also system shouldnt be slower, no way. Try a reinstall.
If you need to autostart, set desktop.exe in autostart menu in main shell setings.
That way system will start desktop, then iphone menu.
If you need a specific program to run after iphone menu is loaded, you can add it in desktop.mscr file from sd/program files/desktop. If you are not good at computers, email me and i`ll send more instructions.
that is a very powerful device, with very nice menus, i know the brand. They are manufacturers ( Auvidio ).
I`m sorry but my patches will not work at all on your unit, i never had one to test and pretty sure that the system is well locked.
Yes :) very nice GUI and menue... that´s why my decision for the AV601... it looks a bit more "professional" like other China-RNS i think ;)
Auvidio= manufacurer ? are you sure Petrut?
i have access to the WinCE 5.0 main system and backuped the complete NAND-Flash Drive so i find some interisting files like a UIDATA.res with 50MB for example... but i´m an absolute noob and when i try to extract the res file i became an error called incorrect filename :(
Petrut, if you are interested or may have a closer look on the files, i can send you a copy by mail... ;)
Hi, perhaps I'm stupid but I followed your installation instructions it has install and reboot, but at the point where you say i must choose cardstorage/programfiles/desktop, there isn't any desktop folder in my programfiles folder on storage root only inside are : Calc98CE, Close, EuroKeyBoard, Fileviewers, Flash, Games, hODB, MSPlus, Naviplayer, NetCF3.5, nitrogen, pocketrar, pocketpicture, screenshot, sql3.5, Tcpmp, Tools, totalcommander, xnview pocket...... but no desktop folder, could you please help me ?
I would like to buy your WinCE Patch from You Petrutms for my Dynavin E39 WinCE 5, but first I have few questions:
1. Did the evolution of the WinCE 5 stop at version v8.1 (Does it mean no keyboard, mouse, and a working OBD software support?)
2. If I buy WinCE Patch now, do I have an access to the newest update, or do I have to buy new version every single time?
3. On the Wince patch demo video I saw that there is a possibility to start automatically desktop view, but is there any chances to start the iphone look interface and then afterwards to launch navigation software (ie.: IGO) also automatically (by default)?
Hi, i would like to use software to take screenshot of OS (WinCE 6), i sell witson dvds and i would like to use screenshot on my announces, i can pay for service, how can i contact you ? Thanks
Hello Petrut,
For 2 weeks I have bought a TID 8928 with a "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. Then I bought the WINCE6.0-PATCH from you. But after I have installed your patch I mostly get a white screen with "Boot Authenticate is Error!". I have tried to fix the problem by installing the original firmware for the Navigation-Board. But I have only found "NOVADA 2450 N117 PCB V5". The Navigation-Board is "NOVADA 2450 N117 V6". After I have installed the Firmware the screen only shows "No Signal".
Have I killed the Navi-Board now or is there a chance to make it working again?
i`m sorry, you killed the board.
There was a solution for your error, next time please email me when you have issues, don`t reflash with files found on internet.
Hi Petrut,
which part of the board I have killed?
Is there any possibility to replace the "killed" part?
I have learned to repair Radios and televisions.
Hi Petrut,
today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?
I have the Dynavin E46 in my BMW (V5 on E90 platform) but have been told by the seller that it is NOT a TMC model. Can I still use the patches and connect to traffic via wi-fi?
Hi Petrut,
I have installed your patch on my Dynavin DVN-MBC with a Nowada 2450 board running Wince6. Can you help me with reflashing this unit? I cannot find the firmware anywhere.
Petrut, does the 8.3 version enable bluetooth data link on a nwd2450 wince6? that's about all I need - get the unit to connect to the internet via bluetooth and my cell phone. If yes, is connection established autoamtically/ settings remembered through soft reset?
no, sorry. For now is just a simple bluetooth support, with obex file transfer one SOME firmware revisions. Is not stable. I`m working on DUN support. You can buy wifi patch, it does same thing, but you need a phone with wifi AP software.
thanks for the quick response. my unit does not have proper usb port (doesn't show up flash card as a drive in totalcmd) and I don't feel like opening the unit for soldering. Would probably sell this one and get something else as data trasnfer is critical for me
Petrut,
I have bought wince patch 6. As you told me in VW GTI forum,
i have email you the resinfo for you to build a custom patch for my 2 din unit. Let me know that you have received my email and working on it. Thank you.
hello petrut,
i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
with kind regards and hoping for a solution
Hi Petrut,
I am having a similar problem to one of your other customers. I installed the patch, connected my HWUN3 usb adapter but it is asking me for a driver name when I connect. It autopopulates with rt.....dll but when I click ok it keeps popping back up saying unidentified usb device. How do I correct this?
hello petrut,
i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
with kind regards and hoping for a solution
1. Make sure you configured the modem on oc as instructed in 3G manual
2. You need to manually create Internet 3G connection on wince 6, follow screenshots from manual.
3. Make sure you have 8.3 patch installed.
4. If system doesn't enter driver name automatically at boot, something may be wrong, reinstall 3G patch.
For more details if you still have problems, email me.
Hi Petrut,
How can I uninstall the patch?, I have a problem with my navi software and I can't use it.I have a message:Illegal operation report, The software performed illegal instruction(MAIN)....
If I can't fix the problem I prefer to uninstall the patch and use the navi software.
Internal files can't be removed unless you reflash. Sd files, just delete program files folder and set navigation path to anything you want. Internal files are useless without sd part, and will do no harm.
Hi can you please tell me how can i disable my id on desktop startup on win desktop start a card with my id pops up i press ok and desktop starts can you please tell me how to disable this please?
I dont use your patch on my AS-7608 V4.2 device. I use it only once after this it didnt boot the StorageCard\Program Files\Desktop\Desktop.exe, I have 4 problem:
1.) Could you please say me how will i activate the screen keyboard. I try lots of way but dont do it. Please help me.
2.) When i start the device in navi mode it wants me to make a screen calibration, after i do it and press ok it wants me to choose the navigation path. When i want to explore my sdcard for choosing the desktop.exe it shows me nothing. My device dont read the storagecard. I dont understand, how will i solve this bug. I tried 4 different sdcard. It always asks me same screen calibration then choosing navi path then dont read the sdcard inside. I format sdcard with FAT format and named it as STORAGECARD. But the device may want me to named as StorageCard. Is there a case senstive. On win7 it automaticly make the sdcard name uppercase. I dont do it like "StorageCard". May be the main problem is this?
3.) I tried your patch only one time and saw that i dont touch the upper options for example close button (X), File, Edit, View.... Screen dont sit the screen correctly. How will i calibrate it.
4.) is there a way to use your patch without using a sdcard after install your patch on sdcard. I dont want to use a sdcard. Because of my second problem.
1. You must have taskbar visible ( set it always on top ). Then you can select one of the 3 keyboards.
2. name sd whatever you want. It looks that you have a hardware issue, sd card reader malfunction.
3.calibrate from mainshell of gps menu, touchscreen section. Use a pen.
4. NO.
No Petrut i didnt put card in any other unit i ran the patch again on my unit because it was saying because i was getting a driver not installed message but after it would automaticly sign in the reason why i loaded patch again is because windows only saw 1 usb from the back the one with wifi adapter and i wanted to play music with the nitrogen with usb flash its my fault for messing around with the unit.do you have any thoughts? i wont mess around any more i promise.
Hi when i start desktop mode it asks me something about usb in chinese writing i have to close those windows and then it goes to desktop mode and immediatly after it takes me to iphone mode which i have to close and i have to take in and out the wifi adapter for for it see it before when i was going in to desktop mode the usb window automaticly signed in and wifi connection was available now it says usb driver error does any body know?
you said that wifi works fine. Now it doesn`t ? dont mess with the system. Wifi on dynavin is perfect, if you have problems you did something wrong, again. Not that wifi patch will work on one unit only, dont try to put sd card in another unit, it will kill the patch.
When system will enter in desktop mode the driver name will be automatically entered. Do not manually close driver window, etc.
I have a W2-D9200V with mesada 2440 board.I download the Wince patch for ANY Nowada 2440 , 800x480, Wince 5.0 and it works fine.The only one problem I have, is that I couldn't find the autoupdate for the NWDTCali in order to change the system to english language.
I have a Hualingan 8726 für Rover. There is a Nowada N303 board inside with NandFlash (64MB), 128MB RAM ... witch patc do I have to buy for it. I just want to run Navigon, nothing else.
Hi Petrut and to all last week i bought a dynavin e46 it was all ok but i took out sd card when i tried to put back i accidently jamed the card on top of the socket i tried to pull it out and i damaged the sd card what do i have to do it had the wifi patch and the win6 on the card when i install sd card it says no navigation software found what must i do buy wifipatch and wince6 patch or contact the dealer
?
If the system can't see the sd card, try another card. If still doesn't work, contact dealer, card slit damaged. Wifi and wincepatch you have them on email/server
Wifi is always sent by email, so you must have it in your emails. Wincepatch is always on the server, every customer have one account on wincepatch.com, so download it from your account.
Hi once again i bought the dynavin from dynavin shop in greece he programed and sent the unit to me i phoned him to send me the patches and he said no he cant i suppose that it is in his email account not mine anyway is it possible to buy from you the patches because i dont think i will get anywhere with him? thank you once more Petrut
yes, files are encoded to your unit. They dont have the tools to recode, or the permission to send files by email. If you damaged the sd, is your fault, always you should do a backup.
I can recode files for you, but you need to buy both patches.
Hi,
i've buyed the patch for 6.0 but i thing i need a custom on for Roadrover C7037VT, cause some paths are different. Ive took a screenshot from the root path.
I have the same resinfo. Would you mind taking a picture for me of the board and sending it to me? it would really help me connect the USB to my board...thanks!
upgrade folder in root of sd. start from total commander or windows explorer. If you have a custom wince 6 patch version, will not work. Patch is tested and working perfect.
Hi,
I am trying to install v8.3 from v8.2 but when trying to start update.exe from desktop nothing is happening. I copied update from file onto sd as per instruction. I noticed that the NWDFlash is almost full with only 168kb free could this be the problem. Please help?
The patch will work, but I think you need a custom version. You can buy any patch and I'll send you manually the patch for your system. I'll need the resinfo data abd total commander partitions list, and task manager processes. Wifi will work if you have a USB connected to wince. If you can read a USB flash from total commander , is ok.
Hi Petrut,
I am interested in the wifi more than anything as I need a way to feed in traffic data. I connected the USB but couldn't read it in total commander. but if i put a media file in the usb, the unit reads with its usb reading program. does that mean the usb is enabled?
you need usb mod on this board, and i dont know to do it... i never had a unit like yours, i`m sure the pins are different. If you can get me the board layout ( look in tutorials to see an example of nowada board ), you can do the usb mod. Without it, no wifi.
:( if i send you a picture of the board, would you be able to help? I don't know where to get the board layout....I asked the manufacturer...but he wasn't helpful
Hi,
installed your Wincepatch and it is working good with Igo8 and Tomtom on Nowada2450 CE6 111mB ram unit. installed hobdrive software and running with standalone version. How can I connect Hobdrive to bluetooth ODB2 dongle using Wincepatch?
Hi Petrut,
Just to make sure I understand you correctly. I need to install v8.3 run the software needed and do the usb hard wiring mod to make OBD2 to work with usb cable?
thanks...I don't have the unit yet...just ordered...but the manufacturer told me they use the nowada boards...
where can i learn about your patch more...like once i get and install the patch...can i still use the old functions? like dvd, bluetooth, picture in picture etc.?
after further reading i understand that your patch will not be able to access the bluetooth phone function. so is there a way to still use the original software that comes with the device and use your iphone interface when i need to use wifi?
I think I am confused to how the bluetooth calls work....
1. Lets say I install the wince patch and run the iphone interface. then i run the igo navigation. what will happen if i receive a phone call? can i receive the phone call through the unit?
2. If I am running the iphone interface and I need to make a phone call, do I have to switch to the original software that came with the unit? if so, do I have to uninstall the patch or so i just run the "Original Shell" icon.
you should watch the video from first page...
every original menu can be used as usual, only gps menu will be modified. If a call comes in, the unit will automatically switch fom gps/iphone to BT, etc.
Hi!
Device:
SMDK2450 Board 5.0
Windows CE 5.0.1400
102 MB RAM
ARM920T S3C2450 (400 MHz)
800x480 pixels, 65536 colors
Menu navigation is just out of the window choose the executable file.
Windows chinese. module marked HK913 v1.1
Proccesor S3C2451XH-40
Patch №9 - download, installation, but not work. folder on device named - Storage_Card but not StorageCard. Please, help :)
Thank you for your work! The shell is started. But almost no one program will not start. (players, calculator, etc.). It looks like windows is strongly reduced. English firmware is not available as I understand it ... It is sad. Thanks again!
About 3G patches, is that support for almost usb 3G modem brand or must be special usb 3G modem?
About the system, is that embedded into the OS system, or just add script and .dll files into the windows file? because if just the script and .dll files into the windows folder, it means the 3G device would be loaded after the system completely copy to windows.
About that price, is that including support for the next upgrade?
Any modem that can be detected by wince is compatible. Best modems are huawei.
The patch is a complex set of dll, scripts, registry that are forced at installation in the wince system.
On wince 6 will always stay there until complete firmware reflash.
All upgrades are free.
Hi Petrut,
I just bought the following system
Road Emperor Volkswagen Edition - In Dash Car DVD With 3G Internet (WIFI, 2DIN, GPS, DVB-T)
Information about the system
- Board: Telechips TCC8900
- CPU Core: ARM 1176JZF-S (500 MHz)
- GPU: ARM Mali-200 (200MHz)
- Internal memory: 256 MB di RAM, 256 MB di NAND Flash
- External memory: SDHC (fino a 32GB) e drive USB (fino a 32GB)
- Operating system: Windows CE 6.0
GPS module: GS MediaTek-92m-J
Please, let me know what is the right patch I should download. My system doesn't match with the ones available under the wince 6 section.
Salut Petrut,
Am cumparat alt gps Eonon G2216 si nu stiu ce soft de navigatie sa pun pe el, am incercat TomTom7 si ruleaza nu ma lasa din setrile din tomtom navigator sa-mi setez antena gps cand apas sa selectez antena imi revine in meniul dvd-ului la setari gps si acolo imi arata semnalul la antena dat in tomtom nu pot selecta antena gps.
Ce imi recomanzi ca soft gps? am vazut ca merge Igo8 dar nu-l am actualizat din 2009 si poate sti tu ceva mai bun cu harti mai noi pentru europa centrala si de est.
Hola Petrut,
tengo el 2 Din
que esta roto el microprocesador de arranque,tu tiees algo asi o solo parches que tambien estoy interesado,
yo tengo este modelo pero sin 3G http://exclusivecarauto.com/2din-wifi-ipod-2011-p-362.html
gracias
Hereby I would like to thank Petrut for his great patch and effort to help with my Dynavin V5 system. I had some problems, but it works perfectly now, thanks to his great support.
If you want to get more out of your device, you should definitely buy this patch, as the possibilities of your device can be endless.
Yes, except desktop function, 3G, wifi. Everything else works fine. Patch is not listed due to lack of interest from flyaudio owners. If you need it, buy any wince 6 patch and I'll send yours manually next week when I come back from vacation.
I'm a flyaudio owner, and I'm very interested in these patches. Is there anything I can do to help with their development/testing? Is it possible to mod the usb connection like some of the other devices you mentioned?
I am definitely interested in flyaudio units. I'm hoping to be able to write some apps for this. I just bought one a few days ago.
Couple of questions:
- What do you mean by the desktop function not working? You mean I won't be able to access the WinCE desktop at all?
- Since the unit has a USB connection, is there a way to get wifi working using this?
- Is the patch reversible? Can I set it back to the way it came stock if I need to?
Jaime, I also have a flyaudio, and I'm interested I developing some apps for it. Let me know if you decide to try this, or if yuu have any other ideas.
Yes, desktop will not work, only iPhone menu and programs. I had latest flyaudio unit and the USB is not connected to gps board, so wifi or 3G will never work. Patch is reversible.
First of all!
Wow, I think your patch looks great!
But I've got a question.
I have a Zenesis(Dynavin) 2Din system for an Audi A4 built in to my car. This one runs on WinCE6.0.
I took a look at your litte sample movie, but I am missing the phone function in here. My radio has got a bluetooth function, so I can connect this to my phone. But now I am unable so send my contacts to the radio, so if I need to call someone from my phonebook, I still have to handle my phone. Is the function to copy my phonebook to the radio supported by your patch?
I don't understand.
Isn't my system running under wince 6 now then?
And my carkit is a function of the 2din system and connecting to my phone now via bluetooth. This way I can call by opersting the phone from my Zenesis.
Am I loosing the carkit function in total after installing this patch?
no dynavin unit runs on wince 6. Radio, bluetooth, tv, ipod, etc run un noname custom operating system, and navigation under wince 6. My patch will modify only navigation side of the unit, everything else will be the same.
sorry! I wanted to say: when I go to navigator system setup when i push SETUP TIME the screen is frozen, I CAN'T use navigators because of it, they're frozen too.
This is a strange bug. You need system firmware reflash, I think for both radio and gps side. I can provide both with my patch, but I can't guarantee that will solve your problem.
Hello,
I have a similar case as posted by " Rey " on 21st July 2011: a chinese GPS/DVD unit with BSP Version: PrimaCE6EVB / Windows Embedded CE 6.0.3122 .
I like the current Main Menu interface, Radio interface, but I don't like the iPod, USB/SD interface. Can you offer better interface? And also USB/Bluetooth modification support for external device? I would like to connect to OBD2 bluetooth device and use for example HOBDrive application.
Please let me know. I also have other friends with same model looking to improve the unit.
The unit also has CAN-BUS decoder interface to show trip computer information (mileage, fuel consumption, external temperature, etc).
usb/sd/ipod interfacces can`t be changed, those are built in firmware.
Also no USB mod on your unit for external devices, that is only for nowada boards.
please run the tools from tutorials and send me the results.
I built several wince 6 custom patches since then, and maybe one will fit your system. I need partitions lists in total commander and processes lists from itaskmanager.
Hi Petrut
It's me, Nathalie, the simple housewife :)
I installed the patch and everything went well....
Itried to use something (i think was the mp3 or the video player) and the following message appears...
"The selected device Dynavin V3 BMW E46,CE 5.0, 800x480 Display: 800x480x16
OS: Windows CE v5.00
Doesent match your device
Choose another device?"
What should I do?
Thank you very much for your time!
PS Also have the Garmin soft in the Sd and no way to link it into the GPS....why?
you must use system tools app from desktop and remove gapi, is not compatible with your system.
Also you must edit the garmin icon from iphone menu, there are instructions in readme.
Hi, after some problems with a new Version of Navigon, my Navigation Screen stayed dark, the normal setup screen doesnt come.
So I made an firmwareupdate but I think, the firmware was not right.
Now, the volume does not work right, for the radio, you can oly hear something at level 11 and 13,
dor the music coming from the sd card, it only works with 12 and 14 but on different speakers.
Do you provide, coming with your cepatch, also the right firmware?
I provide firmware but only for gps side. You flashed radio side, abd probably used an older firmware. Current 7608 version is 4.2, I think you have 4.1. Contact audiosources or reseller and ask for right firmware based on serial numbers.
Hi Petrut
I have installed the wi-fi patch today, when i insert my dlink 140 and switch on it goes to the desktop and a box appears. The only thing i can read is usb the rest is in Chinese...,any Idea what to insert? cannot find in instructions
thanks
Peter
english firmware is mandatory. Read instructions from wincepatch, and reflash system. Then reinstall wifi patch. Also i`m not sure your dongle will work, depends of his revision...
Thanks for input
right i have reinstalled the patch,reinstalled WI-fi,it now sees the dongle and the dongle light is flashing...I am getting what i think is a log on box with 4 or 5 lines to fill in, But they are all in Chinese.
my desktop and iphone menu are all in English what am i doing wrong?
thanks for fantastic customer support
peter
I can't remember what unit you have. if you have dynavin, you need to reflash with English firmware, links in readme. If you have wince 6, dongle is not compatible, all wifi stuff is made in background at boot. Anyway, try to enter driver name rt2870.dll
First of all sorry for my english!
I have since two weeks a unit with the following dates:
Typ: 7501 (7")
Ver: F35A-F35A-6025-100714(WinCE 6.0)
ID: 03E2-80100723-281110-484E0242996D6D
D0021 MAIN8904 100524A08 1
VW01 Aug 7 2010
A.)The unit is fine and nice, but i have two problems:
1. The navi-sound mutes all voice (band,usb,cd,etc)and they come back a few seconds later.
2. It isn't in the unit TMC.
My question, whether there is a solution to these?
B.)I really like your blog, where I found your "Wince6-Wifi and 3G patch files". I have in this context the following questions:
3. Will they work on my unit?
4. Can i back to the orig. system in anytime? (because of the guarantee)
5. Can i hear the sounds (navi, radio, sd, cd, etc.) after the patch parallel? (no mute!)
Thank you in advance for your response and
sincerely from Hungary
Hi Petrut,
i ordered your patch and installed it on my GPS. It's working fine, but i have 2 question:
On my board (Nowada 2450, N117 V6 WinCE6 800x600)is still the chinese firmware. Do you probably have an english one, or can i install n117 v3 or v4 on it?
Does the USB mod work on this board as usual (same pins)?
Thanks in advance and best regards,
Peter
Sounds good :-)
Your patch is working pretty good on this board and USB Mod too. The only problem i actually have is TMC reception with the
onboard RTM6000. Antenna connected, but no signal. But I'm
sure I'll find a solution :-)
Thanks and have a good weekend!
Hi
I purchased the patch yesterday and have installed it
I also have IGOprimo. It might sound silly but were do you place it on storage card so icon picks it up and what name does icon look for
thanks
Thanks Petrut
I have the folder in the root directory of the storagecard,it is called primo.
I cannot find the \ key on the keyboard, only a /
I think the correct syntax is \storagecard\primo\primo.exe
is that correct and if so where is the \ key.
can you tell me what keyboard will work with the installed drivers to make life easier
sorry to be a pain
peter
At the moment I'm a little unsure what it is you actually provide i.e. is it the software only?
So at this point I would be grateful if you could email me the full cost of all software and hardware to incorporate your upgrade into my system making the internet and a working desktop available on my head unit.
Hello. I have a radio 1 din for renault megane III. Can i update the original firmware?. the firm that you have, is installed on the sd card?. I control the radio from the steering wheel, can I lose control from the steering wheel with your firmware?. my radio is nowada 2450 with wince 6 and 800x480 resolution. thanks
I am enjoying the patch for the most part. I have some issues with settings persisting after powering off my unit. The most frustrating of these issues is with the Nitrogen Player, which is actually the main reason I opted for this patch in the first place.
For example, any changes I make in the settings dialog of nitrogen are not saved after the unit is turned off then turned on again. This behavior seems to persist through most applications.
How can I resolve this?
My other main problem is getting nitrogen to display my album artwork, I've tried everything, with no success.
If I could work out these two issues I would be a very happy customer.
about nitrogen settings, this shouldn`t happen. Please download latest data files for your patch from the link in the readme, if you are an older customer, before 8.1 patch, and replace nitrogen folder.
The album art is easy:
1) Image file with the same filename as the song file (e.g. "\Music\Coldplay - Clocks.jpg" for "\Music\Coldplay - Clocks.mp3");
2) Image file containing the album name (ID3 tag) (e.g. "\Music\*Viva la Vida*.jpg" for a song which ID3 tag for album name is "Viva la Vida");
3) Image file inside the folder which one of these filenames: "Folder.jpg", "Cover.jpg", "AlbumArt.jpg", "AlbumArtSmall.jpg".
what is your email address? its not mentioned anywhere in your website. i need to send you the deviceid.txt file back to you.
I suggest you add that to your readme file, otherwise you'll have others like me trying to follow the instructions but are not able because they cant find your email address..
Hello
I have a Chinese no name double din unit and am having trouble loading the igo maps into it. It seems to read the SD card and show the path but wont load. Firstly, do you have a patch for a SAcGM1001 and secondly, will your patch help solve my problem? I'm in Australia.
Thanks
Lauren
I just bought a 2004 BMW X5 and about to install the Dynavin E39 system. I want to integrate my iPhone 4 for internet access and whatever else cool things these two devices can do... Can you give me the latest on how to utilize 3G or Wifi or anything else?
e46forums.com, there is a special thread with a lot of info , also videos, etc.
Also there is video on mainpage of this site and description in patch details.
This question was because Tomtom icon available in wincepatch demo.
I have search everywhere but today there is no working Tomtom release for my Nowada wince 6 unit.
Thank you anyway.
I tried to install the patch but I have one error .
Missing file. I unzip "nwd2440_CE5_480x234.rar" in my SD card.
There is only wincepatch folder with all file that I decompressed.Please help me
REgards
make sure the archive will decompress without errors. If have errors, download again. Also download data files as instructed in the readme file from main archive.
With RES_INFO:
NEVADA_2440 , MESADA_2440 Multiplatform 5.0 , Windows Ce 5.0.1400 - ARM920T , S3C2440 (385Mhz) , 480x234 (65k).
During installation I receive "Data File missing.Please read the readme.doc ..."
With explorer.exe I find :
Folder - "Application Data"
Folder - "CAM_DATA"
Folder - "My documents"
NWDFlash - "Voices" Folder with "Collected" file and "touchcali"(file),"ttmobile"(file),"ttnavigator"(file)
Folder - profiles
Folder - Programs Files (no files or folder)
Storage card
Folder - Temp (no files or folder)
Folder - Windows (with various file and folder)
Furthermore In my Maisun radio I find (( in a screen similar to your number 6 patch WINCE5):
ID 4468-80081215-1F3F10-384E57-2D7C7871
Ver. : D097-B21A-5009 ( windowsCe 5.0)
Mem Storage: 40936 kb
Avail Mem: : 36412 kb
Hi Petrut
I have a NOWADA 2450 N117_PCB_V5 with win CE 6 and
I am really interesting by your patch.
My question is about Tomtom Navigator, it doesnt work with my Nowada, he start but I get a message "not enough memory".
If Tomtom Navigator run with your patch I will order it, so tell me please.
Thank you.
send me an email, tell me what unit you have, wince version ( 100% check it ) . As i can see from your screennshot the wifi is not installed. No browser icons on desktop.
I need it to work for a sertain application. If I start the aplication it says it cannot run it needs .net 3.5. I looked in the program files, .net is there how do I make sure the system knows its there and use it for my application to work ? Its the tomtom audio fix, it needs .net 3.5 to work. Please advise, I have Wince patch 8.2 up and running.
.netcf was removed from wince 6 patch due to some issues on some devices.
if you want it, email me from the email adress used to pay and request a .netcf enabled patch.
Hey Petrut
I cant get Remote desktop to work
When i open the Remote desktop on the dynavin
The keyboard is Not coming up so i cant write anything
Can you guide mé set it up tanks again for erffort in This!
but my unit is 2 years old so i dont have that interface, i would like to know if your wifi patch works with my unit, this is the information i got from the unit:
platform_oem
platform_type 5.0
windows ce 5.0
95.0mb ram
arm920t s3c2440a(405mhz)
800x480 pixels,62236 colors
and i would like to know if can i solder the usb port to my unit, this one have one, but the sd cards boards is burned, so doesn work. thanks
by the way i can acces to the windows ce without problems.
what a bad notice, i know that this new units accept wifi usb dongle, so i thing theres a way to configure it, do you have some patch or program to modify the firmware? do you know also how to know if can i solder a usb port to my gps? thanks alot
Hey Petrut i just installed the wifipatch
Its working great fuck am so happy thank your the Best
But when i go to youtube.com i cant see videos because
Flash is Not installed i and cant upgrade because
It Not possible for my operating system i have wince 5.0
Please help mé get flash working
i have sent the deviceID.txt last night when will you send futher instructions to install the wifi-patch on my dynavin?
you allso work in the weekends? or are you first back on the job on monday? sorry for many quistions!! but really can't wait to setup the internet in the car :-)
hello petrut
i have a unit with this system information:
BSP Version: AIVCE6_NANO_Rel1.03
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800x480pixels, 65536 colors
wich patch can i use?
It is an Erisin ES862D 2 DIn Radio
Hi, Petrut, I wonder if you have found any solution for the speakers issue with win CE, I`ve been looking on several forums and the only answer that found was a change in the main menu of the gps-radio (on the SOUND configurarion, unchecking the navigation audio option), but sadly mine doesn´t have that option....on the other hand, in my radio, will it be impossible to get a link between the winCE and usb port??......I should stop searching info about it??
Sorry for so many questions....
Sorry, I should read the tutorials first, anyway already running the patch in my gps radio (samsung, smdk 2450, win ce 5.0).........awesome, perfectly working thanks, you save me a lot of time....i´ll be in touch
I recently bought an oem radio with no serial, labels or anything, but surfing the web found a picture equal to my equipment and the model is CAV 8062, I´m trying to get a better look for it (wolfncu on wince 5.0) but it´s been impossible to get something really good, so if you can help me, that would be great,
thanks in advance
I have the Dynavin E9X unit with WINCE 5 and half of my menu is in chinese? Will the patch fix the English or do I need to run a firmware update first. Also, I have a Motorola Atrix and I am interested in the 3g patch, will that phone work?
the patch will fix most visible menus, but also come with firmware for reflash. Wifi patch will work with your phone and will allow you to use the internet data plan from your phone, also same browsing speed...
Hello,
I have what looks like a SKG17A1 board inside my disassembled all in one chinese gps/bluetooth/tv/dvd players. can you tell me if it is possible to run your patch, if so which one?
Also on the GPS board can you tell me which pins would be the correct for the USB mod, to get wifi?
I can email many pictures, and will reply right away, please contact me back and I will be a happy customer, will recommend to all friends of mine, and even donate extra for your help plus buy both patches.
Let me know if you need anything else,
Thank you again.
i can build custom patch for your unit, but because you have only 40 mb ram, you`ll not be able to use iphone menu and GPS programs at same time, also forget about wifi, that one will take 15-20 mb all time.
Also usb mod is not possible on your unit.
Sorry.
Hi!
I want to buy wince patch.
I have an erisin es966d. http://www.padphone-world.com/2-Din-Car-DVD-Player/-/Erisin-ES996D-7-Audio-Player-GPS/2011032401034689519.html
I soldered usb cable to gps-board and thumbdrive shows up as descibed in tutorial.
Resinfo shows:
BSP Version:AIVCE6_NANO_Rel1.03..
AT8XO 6.0
Windows Embedded CE 6.0.3122
118MB RAM
ARM1136JF-S AT840
800X480 PIX 65536 COL.
Do you have a suitable patch or do you need more info?
Kalle
you said you get flashdrive then you don`t get it in total commander, how is it after all? Try a usb device, like wireless adaptor, modems, etc, see if system ask for driver in gps menu. Or a flashdrive with a led, see it led is powered.
You can buy the wince 6 patch for as7608, and if is not fully working i`ll build a custom one for you.
Thougt it was workin, but it was the gps sd-card that i saw.
Light is flashing on thumbdrive and also on a bluetooth-stick i tried, but win-ce doesnt seem to recognise it.
Only need win-ce if i can get wifi to work.
Excellent Application (I bought it last week), My Dynavin E46 V5 runs excellent!. I have a question/problem:
I am having the Gapi pop up in Igo Primo and I solved temporary copying a gapi.dll and GX_HPC.ini directly into the Primo Folder, because my unit was not saving the Gapi set up regarding the Audi Unit instead of the E46 unit. should I do something special to keep the gapi set up everytime I turn off the unit?
Another issue: my task bar is hidden and I cannot reach it neither with a stylus nor with my finger so I have to connect a external keyboard to access it, then I untick the option to hide it but when I reboot the unit, it is hidden again. do you have any suggestion?
Hi Petrut,
I've installed your patch on my Dynavin DVN-MLMB for Mercedes ML (version V5). Everything works fine.
The only issue is that when I use Igo8 (or any other navigation program) navigation sound comes out from all speakers instead of coming out from front speakers only.
I've tryed to change navigation program settings, but without success.
When I bought the unit the Dynavin site said that the unit had the Dual Zone function.
i can`t help, but i`m sure that on dynavin the sound output can be changed to all speaker or front only, for wince sounds. Search on dynavin forums, on e46fanatics.com, etc
Petrut sa-mi dai de veste daca ai indentificat placade baza daca nu o sa-l desfac si sa fac niste poze poate it vine mai usor asa, sper sa se poate adapta un port USB.
i whant to buy me next week for my Mercedes following Dynavin device: http://www.dynavin.com/products/product_dnv_mbe_most.php in the german version. I whant to use the internet function for checking and writing emails and a navi sw that can use live services out of the internet.
What all i need from you:
- WinCE 5 patch
- English Firmware
- WiFi Patch
- 3G Patch
Is it possible that i install these patches with medium know of windows?
How the Dynavin gets WiFi feature? I need a Wifi usb stick to connect to the usb ports? Or did Dynavin have WiFi in its device? What stick will work for me i can order in germany? ( I habe AVM and Draytek stick). If is use a direct 3G usb stick, what model will work? (i have a Vodafone Huawei K3565-Z).
Where i can get the iGO Primo Navi sw?
Many questions, perhaps you can answer some.
you need wince 5 patch ( or 6, maybe your unit will come with wince 6, check it before ordering patch ), wifi or 3g patches, depends what you want to use. Wifi works with an adaptor. ONLY supported wifi adaptors are the one lised on my site. 3G modems, huawei will work but not K series, need E series, e1550, etc.
Thanks for the fast answer. I will buy a listet one WiFi Dongle, thanks! I have orderd my Dynavin DVN-MBE-MOST at the moment ;-)
Will the original Dynavin UMTS Modem USB-Adapter work on the USB connection to the Dynavin with the WinCE hack?
original dynavin modem will work, of course. Any modem should work if it ask for driver in wince mode, read info on 3g patch. Huawei E series recommended.
Petrut, timite-mi si mie patch-ul care trebuie si spune-mi te rog daca merge pe chinezaria asta sa deblochez portu din fata miniusb sau sa adaptez un port USB pe placa sa-mi pot pune wifi/3g.
Multumesc anticipat.
trimite-mi poze cu partitiile in total commander, lista de procese in itaskmanager si poze cu meniul principal in radio si gps. Asa pot sa identific placa mai bine. Slabe sanse sa pui usb pe ea daca nu e nowada.
@genesic, wd6050 is on their site, www.szwaywell.com, email them and buy it, wd6050 is vw only. My patch will work on any waywell unit.
@pablo, tracking is not available for wifi patch, because system is not connected all time to internet and automatic connect at boot is not possible, sorry. I can give it to you but will not work properly...
@mircea, ma bucur ca ai rezolvat :)
Salut.
Am downladat si eu pe data de 16/1/2011 nwd2440_CE5_800x480_new.rar de la tine dar nu a mers ca nu era ce-mi trebuia si mi-ai trimis altul care dadea o eroare si se oprea din instalare. Nu te-am mai deranjat pt ca acuma am reusit sa intru in el si sa redenumesc fila care am modificato de nu mai pornea si-mi cerea firmware update.
2 Din Gps Dvd OEM AS7145
SMDK2450 BOARD 5.0
WINDOWS CE 5.0
58,7 MB RAM
ARM920T S3C2450 534 Mhz
800x480 Pixels, 65536 Colors
@serg, you bought wrong patch!!! Why don't you read tutorials before? I'll replace the patch in your account with right one. You can send me firmware that works on your unit if you have it. Thanks
Hi! At me it is some questions:
- COPY the Program Files folder from the data800x480 folder to WINCEPATCH folder
Where there should be a folder??
- this version ( 8.1 ) must be installed over the old version.
- Where to take the old version???
if you dont have an older version just install it as it is. That message is for older customers that want to upgrade.
Read instructions carefully, extract all archives and will install correctly.
Excuse me. But at me the same
i have this model:
Mesada_2440
Mesada_2440 multi-platform 5.0
Windows CE 5.0.1400
40.9 MB RAM
ARM920T S3C2440A (385 Mhz)
800x480 pixels,65536 colors
i get this error when installing:
Couldnt create directory'\ResidentFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\ResidentFlash\$MSD$$")
replaced in install.mscr ResidentFlash on NwdFlash. received the black screen. Your patch doesn't work on our devices. Though a picture same. I can send you an our Firmware.
Hi Petrut,
I have N117 board on my head unit. Accidentally i've made a mistake. Seem like the bootloader is corrupt.
Is your patch able to restore the bootloader ?
you need to reflash firmware. I can provide firmware for many n117 wince 6 boards but i can`t guarantee that will recover your device. You can request firmware files after you get the patch.
Currently when i press GPS button on my HU, the screen displays "No Signal message". Is it possible to reflash using sdcard ? I've tried several times and seem like the module didn't read the file stored in the sdcard.
Petrut can you help me? My double din unit can't access the "console " screen. I'm unable to use gps or the menu. If I do the usb hack will I be able to reset my unit.and get functions working again? I have links of picture and video of what goes wrong.
hi i have tried to install patch with no success. i have this model:
Mesada_2440
Mesada_2440 multi-platform 5.0
Windows CE 5.0.1400
40.9 MB RAM
ARM920T S3C2440A (385 Mhz)
800x480 pixels,65536 colors
i get this error when installing:
Couldnt create directory'\ResidentFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\ResidentFlash\$MSD$$")
Petrut, I sent you 2 messages about "data 480x234" and you tell me :Read instructions, there is link for data files, but I can not find THIS link! After enter to my account I can re-download the patch nwd2440_CE5_480x234.rar (4,6Mo) but I can not find the link for data. Am I stupid...??? or it's maybe hide? Please help me!
@mauricio, change your navigation program,use igo or something else that have full support for 800x480 screen, nothing is wrong with the unit. The Bluetooth screen is normal too.
@Maurice, all firmwares i have in my patch are 800x480 so is not possible to have a lower resolution screeen. If the image have now black bars around it, use main shell gps settings to play with size and position.
I did the English v3 firmware update for my dynavin DVN-MBC, after the install i seem to have lower resolution on my navi screen. I followed the instructions thoroughly. What could have caused this, and how do i fix it?
Hi Petrut,
I have the following question about wi-fi'patch:
On desktop mode if I want to connect to network which is known Network Key, how can I call a virtual keyboard?
Is there a way to activate the virtual keyboard?
Wherever I need to write the keyboard appears, but in the netwok key box does not appear.
I have a problem with my WD6050, seem to be a problem of resolution of the screen. In the listings of GPS, the lines are assembled with each other, and the buttons in the top of the screen overlap the screen making uncomfortable use it. Please let me know, if you patch will fix this problem?
there are patches for 480x234, see wince 5 section. If you have wince 6, i`ll build a custom one for you if you need it. Some programs will not work in 480x234, so are removed from patch ( naviplayer, etc ).
Hello
I have had my unit for over a year and it has worked well
Recently the unit has some problems it will not play video off the USB stick ... shows vo filter missing /error
Navigation shuts down occasionally
Radio reception is poor
RDS does not work well
I have the VW Sagittar unit
Device: Prima
Description: Shenzen Roadrover Technology
BSP Version: Prima CE6EVB- Rel 9.04
TTX4X0 A6.0
Win CE 6.0.3122
RAM: 887.8Mb
ARM136JF-S TT4XOA
800 X 480 pixels 65536 colours
MCU 3.35 VM-5N81 - V1.15
Does your patch install a new video player? will it help my radio reception?
Is there a package price for the wireless patch and the Win 6 patch?
@Guilherme Taliba, run the tools from tutorials ( rezinfo, itaskmanager and total commnander ) and tell me partitions names and processes and send all info to my email. Iphone menu can be launched at boot automatically if your navi system have the option to run the navi exe automatically...
@deadwiz,will be possible in next release, i`ll add a tool to add any program in startup, maximum 3 programs.
Hi There! Excelent Work! I'm Planning to Patch my Chinese Media Center, but first I need to check the compatibility using your application.
I have a question about the Patch: What about TV? I have "1 seg - digital" TV working nice on its original state. Will TV work after the patch?
Thanks a Lot!
Another Question: Can this "Iphone look UI" load automatically after turning on the device?
Or I should always execute GPS navigation to bring Windows CE UI? Thanks@!
I have attempted to install wincepatch on my Mesada 2450, WINCE 5 Nowada 2450, WINCE 5
Downloaded file "nwd2450_CE5_800x480.rar"
I have followed the readme instructions and installation progress correctly I think. However after restart and going to the desktop the system crashes and reboots after a few seconds.
At no point during installation did I get the window allowing me to disable auto start navigation. I am assuming this is the problem as it is trying to start the nav program.
Can you please explain how to disable the auto start nav function.
Hi, I Purchased your WinCEpatch for my Xtrons TD716G and it
works but all images are to big to fit the screen.
I got the 800X480 Patch, can you help?
Thanks
@Soso, wince will be still in chinese, so some applications will not work. You can unsitall it at any time, and you`ll not lose original interface, the interface will be changed only in gps mode, not radio, dvd, etc. Patch no 8 from wince 5 section will work.
@snoob , NO
@Hej, not possible, is different hardware.
I gues no? ok.
I have a 2 din unit Xtrons TD714G,
Mesada_2416, Windows Ce 5.0
104 Mb Ram, Arm926EJ S3C2416, 534 MHz,
800x400 pixels 65536 colours,
which patch works for me? Will I lose my unit interface?
If I want, can I uninstall the patch and the unit will be
back to original? My WinCe will be in english? so i will have no problem with another programs "No compatible Language"?
Hi Petrut,
In your patch there is TSPMP v.072 video player.
I have TCPMP version 0.81 which is much better, works lightly and has advantages over the older version.
My question is, if i replace the content in a folder SDCard / Program Files / Tcpmp whether it will work the new version?
@whymax, wincepatch will work on your unit, 100% safe, the one for 2450 boards will work. About wifi, unless your unit can access usb flash drives in wince side ( total commander for example, see tutorials ), there is no way to make it work, usb mod doesnt work on your unit.
@YETB, just add the folder with the software on sd, and set the icon path in iphone menu, read instructions provided.
If all goes well, I'll write a review on my blog with a link to your patch, as well as write detailed instructions on the forums, automotive club, can I count on a discount?
I found the patch very useful for my Dynavin and I presented it on the Mercedes Benz Forum Club Italia.
Petrut gave me a unique help in setting up the patch and the Internet connection on my unit.
Many thanks Petrut and best compliments for your new site.
No, wince is a very basic system compared to winmobile, like win95 to win xp. But some ppc ( win mob 2003) will work, also some wm 5 apps if installed and tweaked right. You can search for ppc applications and games. Also flash games work, I'll add a tool to install them in next release.
The sound issue is well known, is wince limitation on some units and some car sound systems. For example i don`t have it in my vw jetta with 8 speakers and also in audi a4 with bose system. You can try other wince media players or play with the settings in dynavin gps or main menus.
About wince language, if you see a single chinese word, 100% firmware is chinese. English firmware is better, reflash, is no risk.
After a long long search in the forums, I found the decision for Dynavin units.
Now all WinCE applications emit sound in all speakers and I am very glad of this.
And another question:
How can I be 100% sure ,do I have English or Chinese firmware?
Many things in winCE are in English and some are in Chinese.
I've already installed the winCE patch and I need confirmation that if I add the English language will i get a problem or not.
Hi Petrut,
I installed winCE patch, my question is why the video player and MP3 player sound comes only from the front speakers?
Did someone else had a similar problem?
My unit is Dynavin DVN-MBML.
All applications under winCE all sound comes only from front speakers.
Whether this problem has a solution?
Thank you!
hello Lynx,
did u fix your problem with the speakers?
i heve the same problem, i can hear sound on gps side and wince only from front speakers! how i can do it?
Steve
@Carlos, no 2 is the right one, patch for any nowada 2450 board.
@murat, in iphone menu you need to set path for the icon ( igo primo ) to the primo executable. Read instructions about how to do that. No idea about bejewled2, probably not working on your unit or missing files, i`ll check. And yes, you need english firmware, there is no risk, that`s why is included with the patch for dynavin. And no need to reinstall wincepatch.
I most thank you for this job you are doing this is really good stuff sorry for the english am from denmark
I have download the wince hack and installed in my dynavin
and it works great!!!
but i have some problems with some things!
1. i already have primo 1.2 on the sd card but when am in iphonetoday and i press the igo primo icon nothing happens?
2: in iphonetoday i cant see the game bejeweled2 you know why?
3. am getting errors in wince when changing things then the buttons with Y N is in chinsese is it because i need to install english firmware to get english langauge, i can brick the dynavin if i install the language package if i already did the wince hack ?
hello
i have a unit with this settings:
mesada_2440
mesada_2440 multi-platform 5.0
windows ce 5.0 1400
45.4MB RAM
ARM920T S3C2440A (385Mhz)
800x480pixels, 65536 colors
wich patch should i use:
Wince patch for Dynavin devices only ! Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480
or
2. Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480
Thanks
Carlos
wifi/3g is possible ONLY on nowada/mesada boards, and only by using a usb dongle, because on them you can solder a usb cable that can access wince...
Built in bluetooth is useless, can`t be used from wince.
Check your board type and reply..
Hi Petrut,
just a question: I own 2 very normal navigation devices, which are based on win ce 5/6. It's no problem to open them to access explorer.exe, but I like the wifi/3g connection stuff you are offering.
Will it be possible to use your wifi patch together with a wifi-sd card to access the internet over wifi tethering?
Or will there be a possibility to access internet over built in bluetooth using my mobile phone's network connection?
my patch doesn`t remove original interface, will close it and run another one. So you can always come back to original interface. Please note that my interface is ONLY in gps menu/board.
Hi, Garmin is not included, sorry, i can`t include navigation softwares, not legal. Is icon only.
But my patch will help you install Garmin on Dynavin, you can add the missing dll files in windows folder at boot, i think the missing files are the garmin issue on chinese devices.
Is very easy to install, just press install.exe and wait to finish.
Absolutely no risk for your device, see my feedback on e46fanatics.
Hi Petrut,
In the forum section "Patch Details" Garmin icon is displayed.
Is there a working version of Garmin included in your patch?
I have not heard until now successfully installed Garmin MXT in 800x480 resolution (Dynavin unit).
In my country Garmin is the best navigation.
The reason is the coverage of the maps.
My second question is:
Is it difficult to install your patch and is it dangerous?
If a potential conflict it possible to restore the old software or any other solution?
Thank you!
Comments (966)
hi Petrut
i download your patch but till now i didn't use it
since my GPS board not fixed yet
i won't to reflash my N117 board
in the readme file i find the part talking about the reflashing
my quastion is does the reflash files that mention in the readme file included with the zip folder with the patch?
if yes what is name (is it the upgrade)
if no from where i can get the reflash files
of course thank you
petrut best. I have a wince 6 purchased at u. this I install and works well. only I can not boot the desktop where the system tool in State. can you perhaps help me. marcel.
Good Day Petrut,
Your custom CE6 patch has been working very well and I'm just waiting for the arrival of the 7711 wifi dongle to see if internet access will work.
My question has to do with factory original R.A.P.(Retained Accessory Power)which is basically any accessory connected to this will remain on for approx. 10 minutes or until 1 of the vehicle doors is opened (Ford) which ever comes first will shut down those accessories tied into this system.
It appears that in my case the shutting off of those RAP accessories is controlled through MS-CanBus.
The problem is my new GPS/Nav/Multimedia that replaced the OEM radio does not send the signal to MS Can to keep it on for 10 minutes (or when a door is opened) after shutting off the vehicle ignition.
Is there a way to configure my CE6 custom patch to trigger the factory MS Can so that it regonizes this new device (GPS/Nav)as it does with the OEM radio that it replaced?
Thank you Pet!
Hi Petrut,
Can you clear up the following questions please.
I have this>> http://bit.ly/Kwuunf unit and Im having issues with the WinCE as I think I messed the settings.. anyway, If I flash your patch will
1) I still be able to access BOTH onboard SDcards
2) Can I access my MP3 music on my USB drive
3) Use the USB Modem / WiFi lead to go on the internet
4) Will my Bluetoth STILL work / steering wheel controls
Thanks for any answers you can give but if this messes up then I have to return the unit to China which I dont want to do.
Cheers, TrOjAn
Also, rear view camera? will that still work?
Hi,
I have a Dynavin V5, i have 2 questions:
1, My Dynavin has WinCE 5 on it, can i put WinCE 6 on it?
2, Is it possible to get the bluetooth working under the Patched WinCE side of the Dynavin so you can connect it to an iphone 4s for google tmc etc?
Thanks in advance
Tony
I have downloaded this patch and like mike I can't install
the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
so please can you give me some help on this as I can't install. Thankyou
Hi,
I installed everything as told in the readme. Now I have this problem:
Every time I start pushing the navi button in the basic menue it says syntax error in a small window. Then I have to click OK (very difficult) and then the iphone screen appears.
How can I solve that?
How do I know if software 8.1 or 8.3 is installed?
Thanks
I want to buy a Dynavin DVN-E46-D99 purely because of the possibility of unlocking its true potential with your patch.
Can you tell me if it will be possible to use a USB hard drive full of content with this after patching with your software?
If not a USB hard drive what about a wifi hard drive?
Also if i get the Dynavin DTV module will this still work after your patch?
Also do you know how many usb devices i could run after patching?
I think the dynavin unit has 2 usb connections (im not sure if these are already used for other things) could i use a usb hub to extend it?
Thank you
you need to get wince version of dynavin :)
a hdd will work fine as long as you have external power for it
also a hub will work ok, with wifi/3g and storage device.
All functions will remain the same, dtv, radio, etc, only wince side will be unlocked and look like a pc.
Thanks Petrut
I cant wait to do this now.
Thanks for coding this patch!!!! :)
I've just installed wincepatch.
My unit is Winca GTCE 8986, and i get the same error as eyeonu
on 27 March 2012 pm31 12:19
http://imageshack.us/photo/my-images/23/img1604ih.jpg/
Do you know how to solve it ?
system reflash only
then you tell me to buy the product and I will be able to connect to internet with 3G modem or wifi.
yes, you can
Please tell me if this model http://www.witson.com/en/displayproduct.html?proID=100966779
support your patch to buy them
Thank you very much!!
yes, and will help your issue
item 1 from wince 6 section
Good afternoon,
I bought this Double Din: http://www.witson.com/en/displayproduct.html?proID=100966779
Supports 3G modem but when I put the APN configuration I can´t put points (.)with the keyboard that unfolds to me.
The supplier told me I should buy a huawei e1550 that connects automatically. I bought it but I can not connect.
You know how I configure it or how to solve this problem?
regards
I sent you two emails reguarding the file I purchased from your site.
Have you receieved them?
Hi, I have just purchased the WinCE patch, I dont intend on using it as I only wanted the iphone software for my unit :)
I am using a unit made by A-Sure which has USB wifi, USB socket for Music etc, an SDCard for movies PLUS an SDCard for navigation... it also has working Bluetooth.
Reading through the posts / forums it seems that if I flash this patch I will LOSE Bluetooth AND the 2nd SDCard, is this correct?
Thanks, TrOjAn
nope:)
even better i think you can link all your programs to the iphone menu.
Anyway i doubt will work out of the box, you probably need custom version. Let me know.
Thanks for the reply.. I have had the iphonetoday running fine from the sdcard..
As Im not 100% its all going to work I wont be flashing the new firmware... The default firmware has USB wifi, thats a hard wired cable into the unit and also an external usn connector for usb sticks with MP3`s on it, but neither show up when they have things plugged into them yet the software on the unit sees the mp3 usb drive, strange.
This is the unit I have.. in case it helps :)
http://www.ebay.co.uk/itm/3G-INTERNET-Car-GPS-NAVI-DVD-NISSAN-X-TRAIL-PATHFINDER-NAVARA-QASHQAI-PATROL-/220933946672?pt=UK_In_Car_Technology&hash=item3370b07d30#ht_23728wt_1139
TrOjAn
Hi I have an old uniden maptrax 430 and was wondering if any of you patches will work on it
no
Hi, I bought the WinCE 6 patch for Nowada 2450 boards, unfortunately I am unable to install the patch due to miopocket install destroying the GPS side of things.I have a Qualir double din unit http://www.autodvdgps.com/7-inch-digital-hd-touch-screen-dvd-player-with-indash-gps-navigation-for-opel-astra-antara-corsa-zafira-gray-silver-black-p-619.htmlI'm stuck on the GPS start screen with a scolling bar, everything else still works bar the GPS.Can you please help me? I'm desperate. :(
send to my email a request for firmware and a copy of your purchase
yesterday i tried your patch on my nowada 2450 board, it installed with no error but after rebooting it didn't work. i've tried to update the patch, with no luck, and finally i put the "update" folder in the sd card and powered off and on, but it seemed nothing appened.
And now.....
wince don't detect my sd card anymore!!! in setup it only show the flash (with only an empty windows folder!!)
Can i do something to repair?
Thank you!
email me all unit details, photos, error messages, etc
Thank you, but i think it may be an hardware issue, because i noticed that has stopped working the sd in the radio section too...peraphs i damaged one of the flex cable while soldering the usb cable.
anyway, i've just ordered a new dynavin d95 ones: can i use the patch i've already downloaded, and buy only the wifi patch for the new one?
Will this patch solve the 'jumping clock' and 'jumping location' problems in Tomtom Navigator?
An example youtube movie of the 'jumping location' problem can be found here: http://tinyurl.com/cw96wml
The 'jumping clock' problem is probaby related; the clock just jumps randomly every second or so.
My unit is an Erisin ES-828D (1-Din, 7", WINCE5.0)
RIZETECH
RT GPS
WINDOWS CE 5.0.1400
46.3 MB RAM
ARM ARM920
800x480 pixels, 65536 colors
----------------------------
NandFlash 31.9MB
22.6 MB used 9.29 MB free
----------------------------
DSK1 Microsoft flash disk
PART00 *
no will not fix it.
Hello,
my GPS Board is:
ALLWISEA5
AT10X0A 6.0
Windows Embedded CE 6.0.3122
ARM 1136JF-S AT560
800x480
I think it is an Erisin ES996 but there is no lable on the unit.
Whith path will fit?
run total commander and itaskmanager and tell me the results.
v8.3 - added on 26.08.2011 / wince 6 only
Obd ELM 327 cable connect ?
- *** added FTDI driver support ( thanks to Haltronics for help ) and a working OBD software ( need .netcf 3.5 ). This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car !
- improved startup time
- added a new, bigger and nicer keyboard
- upgrade enabled, read instructions.
i dont offer support for connecting obd devices.
i provided the generic drivers, you must enable them, are disabled by default. I have many customers that made it work, but dont ask me what cable hardware they used...
Hi, I have a chinese GPS car DVD player, with Resinfo I got the following infos:
MESADA_2440 Multiplatform 5.0.1400 40,8 MB ram ARM920T S3C2440A (385MHZ) 320X240 pixels 65536 colors.
NwdFlash: 16MB (7,99 Used).
Which patch would you suggest, please? Do you think it is possible with your patch to drive the DVD player from Win CE?
Many thanks for your support, best regards,
item no 7 from wince 5 section should work. if doesnt, i`ll build a custom one.
Many thanks Petrut, I forgot to ask you if it is possible to switch to wince 6 also.
Thanks
Hello,Petrut
Is there any risk?
NO
Petrut i need your help, i bought the patch for my device MT6501 wince 5 and it works good, but my device is not working right now and i failed to fix it, even the retailer failed, and i am intending to buy MT8001 wince 6 so is there is any way to replace the patch?
no, sorry, eventually i`ll give you a 30% discount :)
contact me when you have the new unit.
Hi, I'm wondering if the tethering can work using the USB cable, instead of using the wifi tethering, on Android and iOS devices when you plug the phone via USB the tethering is actived right away and recognised by the PC as a USB modem interface !!
will it work "out of the box" with your patch ?
thanks
no will not work. wince is not windows xp, 7, etc.
You need 3g patch and i`m not sure will work with that either, i never tested, not much interest for cable tethering.
Hi again, Petrut!
Can I get access to the second SD-slot(Media SD) from WinCE on my Dynavin MBC D99 ?
NO
Hello,
FYI - I am working on the Flyaudio GUI customization over at the Prius chat but more interestingly your patch works with the Ottonavi on the prius site. Search Ottonavi HU: How to customize (a bit) the UI.
Also I would be interested to try your patch on my Flyaudio and recommend it, if it works. Search my thread at Flyaudio HU: How to customize the UI - 7572. PM me if interested.
hi, i saw your posts on forums.
I`m happy that it works, i could add it to the compatibility list:)
And i think my patch is the best of all unlock solutions, because is SAFE and works out of the box, no need to tweak, etc. And i offer full support, custom versions, etc.
For flyaudio i made some time ago a custom patch and worked fine, but NO desktop and no wifi, 3g, etc, because their usb port is not connected to wince side.
Hi Petrut, Thanks again for the help you have provided. Are you aware of a way to teher via USB rather than WiFi? Thanks.
possible with 3g patch and some older phones, like sony ericsson A platform, old nokias, no smartphones.
Hi! I have Dynavin DVN-MBC D99 Platform on wince 6.0. Is it possible to install android instead of wince ?
if you buy an android unit, yes:)
so of course NOT possible
Too bad. Thanks for the quick reply
Hey I found the wifi files did a clean reinstall of the wincepatch then the wifipatch.
But it still gives a error:
Unidentified USB Device
Enter the name of the driver for this USB device.
Don't know what to enter no matter what I write it gives error installing USB driver please help me Petrut
Could the wifi adapter be faulty? It's edimax ew-7711umn that am using
if it worked, there is absolutely no reason not work again.
If you have the firmware for your unit, please reflash it first, then wincepatch (latest version form your account) then wifi patch.
Hello Petrut acquired the patch 2440 Multi Platform 5.0 allowance
Windows CE 5.0 1400
45.7 mb ram
ARM920T S3C2440A 385 MHZ
480x234 pixels 65536 colors.
Which I could not install, it tells me there is preparing to charge, eh waited for several hours and nothing, it may be, it is lowered twice thinking that had been loaded wrong and nothing help please
probably wrong patch for wrong unit.
what unit you have? send total commander partitions list
Hello Petrut my unit is a 8830 tv dvd napoli windows ce 5.0 gps
storagecard 3.68 GB
NandFlash 45.8 MB
NwdFlash 30.1 MB
should work fine then
Petrut hello I can not install wince, get this notice.
Data files missing.Please read the readme. doc for more instructions !.Press ok to exit !
who is this! what is wrong.
read the manual please !
i have this error,
when i enter on wince i have this error and i don't know why
http://imageshack.us/photo/my-images/23/img1604ih.jpg/
and some china language
http://imageshack.us/photo/my-images/42/img1605s.jpg/
and when i want to run taskmanager i receive this china error
http://imageshack.us/photo/my-images/716/img1606zd.jpg/
what unit?
You wrote about version 8.3 "This will allow you to connect a usb TMC to the unit and use it in iGo, and to connect a usb OBD cable to diagnose the car. Which Usb TMC device and usb OBD cable do you suggest and where can I buy it.
i dont know, i just provide drivers in the patch.
i bought today the wincepath, and i need to know what cable i need to buy to connect my seat leon with odb to the navigation ? i have an odb with usb that i am using on my laptop did this cable will cork ? or i need to buy in obd with bluetooth ?
it should work.
sorry i can`t give more info, i just added drivers support.
thanks for reply petrut, but i need to know the simple way to work, with the device Elm327 bluetooth it should work with your drivers ? and where i cand find the link with the driver ?
no, bluetooth will not work.
Hi,
I can`t instal the patch. I get this message "Data files missing. Please read the readme.doc for more instructions ! Press ok to exit !","Read the readme !!!")
What is the mistake?
I have downloaded this patch and like mike I can't install
the patch -getting message "Data files missing "...etc ...but the install instructions are wrong
They say "COPY the Program Files folder from the extracted data800x480 folder to WINCEPATCH folder ( this way you`ll add the programs ) then copy the entire new wincepatch folder in the root of your GPS SD card"
but the program files folder is already in the wincepatch folder so maybe it's something to do with that!
so please can you give me some help on this as I can't install. Thankyou
Done!!!
i have the same problem as mick
I have downloaded this patch and like mike I can't install
the patch -getting message "Data files missing
Hey Petrut
I have buyed the wince patch and wifi patch maybe a little over
A year ago. For the last 3 month I used a different micro sd card. Now when I use the
Sd card with the wince patch and wifi patch on it I get a error with my edimax 7711 wifi dongle
Its saying error installing my wifi dongle every time I open the patch on the dynavin i have unplugged it many times but still no luck. Opera mini is working everything is working the only issue I have is that it want me to write the name of wifi adapter and when I do its saying error installing the wifi adapter. I had it working for 3 months ago but now I can't use the wifi patch because of this error. Please help me
I have a little over 400mb free space on the sd card. I really can't get to work hope you help me
It's with wince 5.0 and it's dynavin navigation I have
Wifi adapter is edimax 7711 that am using. I had it working before so there must be something wrong
Please help me thanks
did you try a complete reinstall on this sd? delete program files from it, and reinstall wincepatch, then wifi patch.
Hi,
Looks nice your patch. However, do I understand correctly that bluetooth car kit functionallity is not supported?
yes, not supported.
Ok, so the patch has no bluetooth support. However, the new patch is called from the navigation program link. Won´t the original functions like radio and carkit remain, so that I am still able to receive incomming calls through my carkit?
I have a CY7088, nowada 2450 board wince 6.0.
Hi should i use this patch on following system :
Info taken with WR-Tools Resinfo
BSP Version: AIVCE6EVB_Rel 1.00.0.08
AT8X0 6.0
Windows Embedded CE 6.0
115 MB Ram
ARM1136JF-S AT840
800X480 pixels, 65536 colors
Thanks
you probably need a custom patch. run total commander and tell me partitions names
Well i already send the e-mail with attached images of various information that u may required to know, about my system.
Thanks
Hi, i have taken snap shots so, can u provide me ur e-mail id so i will attach all of them for further references.
Thanking you
Thanks for the reply,
let me check then will back
Hi there i tried one of your patches for wince 6.0 and there's an error has poped up at the installation process that the patch couldnt create program files folder in my sd card. i took a snapshot for the error message and another one for my navi system
snapshot for my navigation system
http://i463.photobucket.com/albums/qq355/majood_me/photo2.jpg
snapshot for the error message
http://i463.photobucket.com/albums/qq355/majood_me/photo1.jpg
anyone got the idea to solve this problem
my system brand is Roadrover for ford
all roadrover units need custom patch
email me the partitions list from total commander
is that's the total commander ??
http://i463.photobucket.com/albums/qq355/majood_me/photo.jpg
sorry im not that good in these stuff, tell me what to do :D
Hi,
I buy a camper with a car dvd player 1 din 7 inch with gps.
I buy today your patch, but I have a very bad problem. My touch screen works fine in radio, dvd, etc. but when I put gps mode the touch screen doesn't work and my device is a car dvd player without keyboard!!!
I read some days ago this forum
http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=123171&whichpage=6
and I put "AutoUpdate_Eng_Untouched.zip" to reflash my wince, it's horrible!!! Wince 5.0 update well but the touch screen doesn't work in gps.
I read a lot of hours in internet and at final I found your web and people talk very well of your patches. I buy your patch and I read your blog about to reflash wince 5.0, You talk about this link http://www.mediafire.com/?mwzotnttyzy and I download "winceenglish480x234.zip". I put in my sd card, I switch on my device and the device update well but the touch screen doesn't work. I don't know what to do, can you help me? How can I install your patch? I need touch screen in wince 5.0. I thank you very much if you can help me.
My device is
SCREEN: 400MHZ
CHIP: SAMSUNG S3C2440A-40
ARMV4I
WINCE5.0 CORE
64 MB EMS MEMORY
7 INCH TOUCH SCREEN
Thanks again.
Regards,
David Gonzalez
Hi Petrut!
1. I have your wince patch and wifi patch. All is working besides I can’t use Internet Explorer. Opera is working good. IE does not load web pages, always gives white screen. I have tried to reinstall your patches and play with IE settings but it gives no result. What could be wrong?
2. Is it possible with wifi patch to save wifi settings and can it somehow show which networks are locked and which are free?
My unit is Dynavin V3G.
on wince 5 is not possible to save wifi settings.
also internet explorer is not working on dynavin, i have no idea why, anyway is so bad that doesnt worth the trouble.
Sorry - I thought the flash was for all-chinese - I just reread the flash instructions and flashed the V5 and all is well - look forward to the WiFi Patch.
Nick
Hi Petrut,
Great site and great job on the patches. Just bought the nwd2450_CE5_800x480_dynavin patch for my V5. Followed instructions and everything worked great - except many of my menus appear to be in chinease. I want to buy the WiFi patch but want to get this issue addressed first - thoughts?
Thnaks in advance,
Nick
Hi Petrut! I need your help!
I have a unit for my car Mazda CX-7. I installed Miopocket 4.0 and now the navi function not work. I can't run the resinfo on my unit so i don't know, what kind of unit I have, but I have another original multimedia unit for Volkswagen car type what is from the same manufacturer, same gps menu, same functions, pics... I can run resinfo on this other VW unit and I read:
Nowada_2450
NWD_2450 mulrimedia platform 6.0
Windows Embedded CE 6.0
111 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
I haven't got the original firmware for my Mazda unit, but I think the other firmware of the VW unit can works on my multimedia too. Do you think?
Or what is your idea, how can I repair my unit? If I buy your patch, it will work?
Thanks
don`t reflash firmware from other units. Touchscreen drivers are different, and touch will not work. send me complete details about unit, i have many firmwares, of course you need to buy the patch.
Hi, i have the WINCA for Chevrolet cruze
http://www.wincalcd.com/en/products_view.php?id=133
I'm looking for his firmware, do you have it?
Thanks!
yes i have. Buy wince 6 patch and i`ll send you the firmware you need, then you install my patch.
Hi
Really nice mod you have made for the Wince.
I will soon order a Dynavin for my BMW E46.
Do you know if its possible to listen to music and use the navigation at the same time with your mod?
When i press the Navi button on the Dynavin, can i then get direct to Igo Primo with your mod installed?
It is possible to easily get back to Dynavin factory Wince?
yes to all your questions. When you press navi button you`ll have access to my patch, iphone interface, etc, you can multitask applications, connect to internet, etc
Thanks for the fast answer :)
I used your program to determine which software i needed. I am a bit unsure that mine is supported.
For the model it says PLATFORM_OEM
PLATFORM_TYPE 6.0
Windows embedded CE 6.0
179 MB RAM
ARM11 TCC89x/91x/92x
800X480 pixels
Will any of your programs work for me? Or are they in your future?
Thanks!
John
Oh, here is the model i bought
http://www.autodvdgps.com/2-din-car-dvd-player-with-695-inch-hd-touch-screen-gps-navigation-3g-wifi-internet-and-bt-rds-atsc-usb-sd-p-2791.html
It's this model. http://www.autodvdgps.com/2-din-car-dvd-player-with-695-inch-hd-touch-screen-gps-navigation-3g-wifi-internet-and-bt-rds-atsc-usb-sd-p-2791.html
not compatible
For those that downloaded v8.3 patch and with supported gps
Did gapi speed up igo?
big difference?
Hi would like to know to unlock patch buy my wince 5.0, my processor is a Samsung ARM920T - S3C2440A
Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please
send board details like in tutorials
Hello Petrut acquired CE 5.0 Platform allowance 2440 480x 234 pixels, when it begins to charge me says preparing to install? nose that happens is to reset the unit ... help please
I have a TID-8903 Ford with wolfsat 3g software. Can i use the ce6 hack for oppening the ce desktop?
i think so
please tell ús what we need to buy and do to have obd on dynavin d99 wince 6 bmw 320 i e 46- and what to buy for tcm usb support and how to get live traffic at igo primo thanks mike
i have no idea. I have users that reported that obd works fine. You need some usb obd2 cable and patience to make it work with my drivers and software. I can`t help more, i just included support for them. For live tmc, use igo primo with a tmc license and a sys.txt entry, you can find it somehwere in the comments, search for it.
Hi, I have the D-link DWA 140 wifi dongle. Almost every time I use it, it does not load up anything for wifi on bootup. If i take the dash apart and unplug, plug in the adapter then it pops up the window for choosing a wifi connection and everything works fine. Do you know how I can fix this? Thanks again.
what unit you have? what wincepatch version? send details by email
I have the Prius Flyaudio E7572 will it work?
I ran the ResInfo tool and couldn't see the 3 screens. Only the Memory/storage/task worked.
I could not get the System one to run or show up.
not compatible at all with flyaudio
Hi, just got the patch for wince 6 and need the english file to reflash the system.I have the Dynavin radio unit. I also have installed HOBD and have a usb obdII adapter ive connected into thew Dynavin USB board but some dialog box comes up in chinese asking me to do something and the obdII contoller wont load!
Any chance of that reflash english file pleeeaasssee!!!!!
wince 6 reflash for dynavin is too risky , i will not provide files. My patch is enough, will transform 99% of menus in english.
I want to change the letters in eurokeyboard
How can I play it in emulator WinCe?
Is there any explanation what column?
How can I add something in the records permanently?
I have this exact same problem of GPS getting stuck as shown in this video : http://www.youtube.com/watch?v=aHuhUMyMk_U
I have this device: goo.gl/ghyYp
Will your patch work on my device?
Thanks.
yes, can be fixed. buy my patch and i`ll send you the reflash info.
Bought the patch, can you send me the reflash pls. Email id is same used in paypal payment.
When will you send me the Flash ? Pls, i am waiting.
can you do the enco b146?
Hiho,
I'm a very proud owner of a Erisin ES778 (ES777 with DVBT). My understanding is that the headunit is on WinCe, while the PAD has Android. I love the combination, but to get the most power out of it, I'd like to unlock WinCe.
http://www.erisin.com/erisin-es778a-hd-car-radio-2-color-led-button-android-23-pad_p278.html?cPath=4_20
Any chance to use your tool ?
Thanks
no, sorry
Hi Petrutms,
I have another question about my AS7609 with sinoembed gps board gb108a.
I am making the USB mod.
I have connected the red wire to +5v, the white wire to the pin 10 , the green wire to the pin 11 and the black wire to 29-30 pin.
All seems to be well connected. I have install your patch and I have access to windows desktop but when I plug a pendrive, a keyboard, a mouse or another device , it does not work.
My question is:
Shall I have to do something more in the board, as putting some jump or resistor?
How can I test the USB mod work well ?
Thanks in advance,
it should work...this is the guide i found on internet. If pen driver don`t work, the mod is not done correctly.
Hi Petrums,
I bought yesterday the wince patch 6.0 for AS7609 and installed it with no problems.
I have the same problem that Charalambos Constantinou ,i cannot find out how to enable onscreen keyboard in wince.
I have calibrated screen with a pen and how you said;
reflash my system, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.
but the virtualkey doesnt work.
Can you help me ?
nowada board or sinoembed?
sinoembed GB108a
Hi Petrut,
I think , I have found the solution,
I have changed "NandFlash" for "NFlash" in the cekey.reg file, the three virtual keyboards work now.
Thanks you
great, i`ll modify in my patch too. Thanks
I have this Card Audio with GPS System
http://www.roadrover.cn/e/productshow.asp?id=276&mnid=19046&classname=Chevrolet
I have a Dlink W140 Wifi USB dongle.
I already have access to windows ce 6 (with wince explorer).
Can I use your wi-fi patch to use my dongle?
Thanks
no, your unit is not supported.
Hello I have an ES848V Erisin 2din system whose GPS gets stuck to 'No Signal'. At Erisin they're telling me that the GPS module must be changed.
I can't get the information required since there is no way for me get into WindowsCE.
Would WinCEPatch work - and help?
Many thanks
no, you need to change gps board.
I purchased the Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480 patch but during downloading firmware the system crashed. I checked the SD card afterwards an i think the files were corrupt on the SD card.
I cannot access the navigation console screen anymore. I think the CE installation is gone. Is there a way to restore this....
I have a Nowada 2450 device.
not possible. wince 5 is safe. Unless you flashed with wrong firmware for wrong unit...
Anyway remove power from the unit for 1 hour and try again with a good sd card.
Hi Petrut
Nice work - I paid, downloaded and installed yesterday. Instructions said:
"Don`t reflash system if you already have english language in wince, and don`t flash firmware files downloaded from different sites unless you know for sure that are 100% safe."
So I did not reflash firmware - mine is already in English. But my iPod and BlueTooth interface are not very good - if I reflash firmware, would I get a better interface?
iPod - difficult to select songs lots of scrolling, no quick way
BlueTooth - no phone book! I want to import contacts
Also iPod and 2nd SD Card are not available in Windows - I can not see them in file explorer
bluetooth and ipod are not connected to wince, so nothing i can do.
oh... ok, thanks for your reply (& I still think you done a great job). Do you know if anyone else has been flashing the firmware for these "Chinese 2-Din" things?
Thanks
Hi, I received a recommended wifi adapter and tried the rear usb on my hu and everything works! For the most part I would like to use the main shell rather than running directly in windows, but i would rather use opera mini than IE. Do you have any ideas how to get the main shell to launch opera mini instead of IE? Thanks again.
not possible. you need to get in windows or iphone menu.
I wanted to know which version i should use
info is as follows
RIZETECH
RT GPS
Windows CE 5.0
43.7 MB RAM
ARM ARM920
480X234 pixels, 65536 colors
Storage
NandFlash 27.9 MB
StorageCard
My unit has 2 Sd slots and explorer on show 1 Sd that is GPS slot. will your patch rectify it. Thanks
item no 8 from wince 5 section
no, you cant access both sd slots from wince
Thanks with this can i do the 3g or wifi upgrade and can i be able to install any cab files?
cab files yes, but 3g or wifi not on your unit
Install the patch however storagecard/programs/desktop straight goes to iphone theme and from there i cannot change to desktop mode. how do i do it this is because i need to go to system tools since i need to do gapi fix. Thanks
just press the red exit button? anyway gapi fix is not for your unit.
Hi, great work keep it up!
I had purchased and downloaded your very first release of the patch quite some time ago. Seems like many changes were made to it. Is there an upgrade I can download or must I purchase the patch again?
Thanks & regards
Further info. The purchase was made on the 22nd of April 2010 but the link i had received in the email back then does not function any longer.
I patched my Erisin unit with this patch. Main issue is that using a media player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add).
petrut you were looking into it. Any solution yet?
You have to deactivate 'music gps' from main settings
no, sorry :(
Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and click ok the same screen is back.
Intellinet 150N adapter I get no screen driver name no
Wi-Fi is not working.
Wi-Fi working when I do this;
I insert first the Linksys WUSB100.
I close the driver screen.
I take out the Linksys WUSB100.
I insert the Intellinet 150N (new model)
I get Wi-Fi settings screen all working (WEB,WAP,WPA2,PSK)
I don’t get driver screen ?? and al is working Why ???
you do something wrong, i have no idea what; anyway your linksys seems not compatible at all.
Hello again Petrut,
I think I have found some solutions to my problem, but is there a way to restore the D99? I have got an extra Map called StorageCard and I can't delete it even if there are no relevant data on it.
Kind Regards
Rolf
Hello,
I have installed wince patch on a new dynavin d99 and the installation was done without any problems.
But the the lack of sentitiveness and respons from the screen in Iphone daily is close to zero and make the solution more or less useless.
Kind regards
Rolf
tell that to dynavin. crap touchscreen in d99!
Hi just bought hack wince 6 for the newest dynavin unit with d99 dont know if wince is in english or not how can i find out? what happens when wince is already english and i install althogh? greetings mike
all d99 are english. nothing will happen:)
Hi, i downloaded your patch, my hualingan head unit has the nowada 2450 board and running on wince 5. I wanted to know if there is a way that i can play my ipod songs once im in the iphone today applicaton.
Thanks
Abhinav
no, you cant
Hi, I purchased the wince and wifi patches a few days ago. Everything worked perfect with the WinCe patch. Thanks. However, in the WiFi patch I followed the instructions and submitted the necessary information to you and am still awaiting a response.
sent, sorry for delay.
Thanks, you are awesome! I am awaiting delivery of one of your recommended WiFi dongles. My particular radio has 2 rear USB ports and one in front with an odd adapter cable. Should the rear USB ports work for the wifi dongle or do I need to follow your tutorial to splice in a usb cable? Thanks again!
i think you need to solder a usb cable
Hi Petrut,
I have an AS7609,
Is this the correct patch?
"2. Wince patch ONLY for AS7608 GOLD EDITION V4, Wince 6, with newer Sinoembed board, 800x480"
Thanks in advance
yes.
no more discount coupons since media stream is now free for a while...
I want buy patch for as7609
How can I get a Coupon Code for discount?
Hello Petrut.
I am interested in buying your patch, but I am from Lebanon and unfortunately paypal cannot be used from my country. is there any other way to make the paiment ?
Regards
no, there is no other way, sorry.
Hello Petrut
Linksys WUSB100 v2 (Ralink RT3070)is not working get screen (driver name) when i put in rt2870.dll and clik ok the same screen is back....?
I have a Dynavin D99 ver6 wince 6 is de driver rt2870.dll ok??
Where can i buy a working wifi adp.
buy edimax 7711 series
D-Link DWA-140 ver B3 is not working
(get Window for driver name)
now i wil test the Linksys WUSB100-EU it must have the rt3070 chip set ?!
....
Petrut
yesterday i purcast your wifi patch.
Do i get the new patch now?
you`ll get it today
Petrut,
I have installed winpatch 8.1 and your wifipatch. My adapter seems to be working fine. The problem is that all of my windows menus are in Chinese. I am finding it impossible to get this finally set up and working. Can you help me???
a new internet patch will come to wince 6 next week!
yesterday i purcast your wifi patch.
Do i get the new patch now?
My unit is a v5, Dynavin, I believe I need the firmware update for v5, but the link on my install directions does not work???
you have wince5, there is no noew patch for wince 5. The firmware links from readme first.doc are working fine. Don`t reflash if everything is working fine.
I just want to get rid of the Chinese menus, Do I have to re-flash to do this? And does that mean I have to reload everything (wince55 patch) and (Wifi patch)???
yes you need reflash.
and no need to reload patches in some cases, just try it.
Hi.There is a registry backup function in system tools. Where a backuped registry files will be saved?
nwdflash/msd/app/registry/backup
Hello Petrut,
I have a AS-7609, Will your patches work with it?
thanks in advance
yes
But my AS7609 has the new GPS Board GB108A. Can I do the USB mod as you say in your tutorial? Is it compatible pin to pin?
Thanks in advance,
hi petrut,
I just would like to confirm is this HU model AU-V8046GD by DYNAVIN wifi competible? What i mean is the usb port is ready for wifi/3g modem without hardward mod?
This is because i plan to buy this HU and also with your patch.
Thanks
yes will work
Hi I have the following chinese multimedia device:
OS: Windows CE 5.0
CPU: Alchemy Au1200 MIPS 32bit
Seems RoadRover (though not sure)
800х480 7"
Here is a link to image:
http://4pna.com/showpost.php?p=197641&postcount=49
By the way, one strange thing, the bluetooth works only for calls, but not for music.
Will the patch help me with that?
Please NOTE that a processor is a MIPS.
Which additional information about the device you need?
no , my patch will not work on this unit.
Hi Petrut,
I have the AS-7608 V5 unit. The unit runs win ce 6.0, and it looks like the first screen on your wince 6.0 download page. I bought the patch, and it installs correctly but I get an error when trying to run desktop.exe. It says something in chinese...
Do you know how I can get it to work?
Multumesc!
Razvan
The window title that pop ups with the error is DESKTOP.mscr. The body of the window is a bunch of chinese characters with the word DESKTOP in the middle.
try to reinstall. if you still have issues, email me, so i can send you a detailed way to fix it.
Hi Petrut,
Email sent :)
Cheers,
Razvan
Hi, Petrut.
Your wincepatch has working great for a two weeks.
3G modem was connected automatically after the "connect on starup" was checked in wince sys tools.
But now a message "error from rasdial" is shown up, and it's possible to connect my 3G modem only manually.
Perhaps the reason is I tried to setup bluetooth dongle (without success) for OBD software. Can you help to get back "auto connection on start up"? I already several times tried to check "connection on start up" and reboot. No results. :(
Igor
you messed with the system files... it says clearly that bluetooth obd is not supported.
Best solution is to reflash system with firmware ( if you have it ), or manually delete all registry/drivers you added during experiment....
Hi Petrut!
The WinCE 6 patch is working great! And even the reflashing of the firmware was no problem.
But now I've got two questions:
Is it possible, to adjust the whole display a few pixel to the left? I don't know why, but my disply is about 5px to much to the right (everytime, within wince and within the programs). So when I try to close an application, it is sometimes hard for me because even with a pen I can't reach the [X] in the upper right corner of the programs. And with a recalibration I just can recalibrate the cursor, but not the display... Is there a solution for this problem?
And the second thing... is it possible to have a clock always on top (while using the apps)?
Thanks for your response and help!
clock not possible
about window position, most wince systems have a setting in main gps shell, find it and see if you can adjust size/position
Thanks for the tip, now it works! But now the clock is always switching back to the chinese time zone, even when I switch off the auto-update in the windows settings. do you have an idea for that?
Thanks a lot!
Hi Petrut,
I have a generic Chinese Win Ce 6.0 GPS unit for my car. it is the usual all in one device with bluetooth etc.
I sucessfully installed mio pocket-mini and have unlocked the device. The mio .exe is run directly from the SD card.
The problem I have is that mio mini does not come with bluetooth interface for use with my phone, i.e. dialer, contacts synch etc..
Does your solution allow contacts to be synched? Also does your MP3 Player allows the use of playlists?
Finally, I also have a strange issue. The original shell on the unit is fine except for the fact that only the MP3 music plays via the car speakers. Bluetooth phone and GPS sounds are routed via the crappy in built speakers in the device even though it connects to my car via a quadlock connection. There is no way for me to change these settings, and even looking in Win CE settings I cannot seem to change this. Will a custom solution from you fix this?
Many Thanks
R:
no, sorry, my patch will not help you.
Hi Petrut
(is the ONLY one that fixed the biggest problems on wince 5 units : losing all data after reboot !!!)
sorry but how can i do dies ?
thanks !!
it doesnt apply to wifi settings. Those are stored in a special partition that wince 5 doesnt have it.
Hi Petrut!
I wrote you an e-mail yesterday concerning my problem that my car rns doen't start after the miopocket installation (the same problem that was already several times discussed here in the blog).
Did you get my mail?
Thanks, Viktor
i thinki i already replied, if not, email me again, have so many emails...
no, sorry, I can't find an answer of you in my mail account. but i will specifiy the problem again!
after a miopocket-installation my gps isn't working anymore. here is a video (not from me, but with the same problem): http://www.youtube.com/watch?v=aHuhUMyMk_U
i read in your blog, that you have a firmware to reflash the device, in this case i want to try this and want to use your wince patch as well.
because my gps was already in my car when i bought it, i have no information about it. but i found a link with some pictures: http://www.alibaba.com/product-gs/492475670/2_Din_HD_Car_DVD_Radio.html
the device AND the software seems to be the same, but i'm not sure about if it is win ce 5 or 6... can you help me, please?
thanks a lot!
yes my patch will help and i have firmware for this unit.
buy wince 6 patch and send me an email to specify that you neeed firmware.
will do so! but first i have to wait for a discount coupon :D
I sent you an email... ;)
Hi Petru
sorry my English
i have all installed ,but How can i save my (wifi) Settings
please help me
thank jou
on wince 5 is not possible.
on wince 6 will be saved automatically.
petrut
im getting the missing files error but there is no readme.doc in the wince6 archive. can you post this info or send to me?
thanks
yes it is. readme first.doc is in all archives. read it carefully.
you are correct it was there installed perfectly once i read it. thanks!
any advise for switching btween igo primo and the music player. would i have to shutdown gps and start mp3. if so can music from wince play while gps is loaded?
im on a maisun MT-8001
add minimize option in sys.txt.
[interface]
show_minimize=1
ok but i dont want to minimize the wince environment i want to switch btw nitrogen and igo inside the wince. will this help?
yes
Petrut,
I installed your Wifi patch on my 8.1 winpatch Dynavin Ver 5 setup. When I installed my WiFi dongle a box pops up that is mostly in Chinese but I can make out "usb". I have no idea what to type in there.
My dongle is a Keebox W150NU. With a Realtech 3070 chip.
Any Ideas??, Thanks
just type rt2870.dll
if nothing happens, adaptor not good.
Ged edimax 7711 series.
Hi, you have a tutorial for the USB MODE for the pcb nowada N306?
Petrut, I am running a Dynavin WinCE5 (v5). When I start up my IGO Prime Nav Program I get a request for my GAPI selection. There is none. What is the work around for this? Thanks
run system tools and run the gapi fix!
So, where are the system tools located, what program on wincepatch do I use to access it?
I found the system tools but there is no GAPI FIX listed. Were they somehow missing from my install???tyrioess for
i`m sure there is. In tweaks section. If you bought the right patch for dynavin...
I'm an owner from a year or so ago. I downloaded 8.1 a couple of months ago. Possibly i need the latest DATA file. Maybe the one I'm using is missing GAPI Fix ??? Where can I get the latest data zip???
OK were good to go now. I reloaded everything and found the fix this time around. Thanks for your help!
hey guys i have a performance teknique ICBM-9706 i got from china i have been looking in alot of forums and stuff to see if i can make this 2 din boot wince can you guys help me thank you
here is the website and the picture of it http://i199.photobucket.com/albums/aa318/joan_17photo/IMG_0119.jpg
email me your issues, with pictures, etc
Hi Petrut,
I bought and downloaded WIN CE6 Patch for Nowada 2450 Boards, Version 8.3. I installed it on AS-7608 V5.
But I only could install the WINCE-Patch. There was no firmware for WIN CE6.
On the desktop I can see the language in english, but I got still some chines messages for new USB-device.
Is there any way the change the WIN CE6 completely to english?
Thanks!
no, is not possible, as said on this site. Patch is 99% english.
Hi guys!
I've been struggling for a while on my new 2din navigation system and of course I arrived to your web!! My problem is that I want to have an external screen with the GPS on it. The video-output does not show the GPS (even on 2-zones mode).
Could your think about something for this??
I tried extracting the signal from the Nowada board directly (thanks to your tutorial info) but this is not possible/direct,..
I guess that your patch has nothing to do with that, am I wrong??
Any advice would be appreciated!
Thank you so much!
no, patch will not help, sorry.
I've just updated my Erisin unit with this patch. Fairly happy with it. Only two issues I have are
a) can't get at the WINCE front end desktop (Petrut is looking at it) and
b) using a player such as Nitrogen I only get sound from the front speakers (and i think in mono). This is my major issue as Nitrogen is far better than the built in media player (which does output to all speakers may i add). Text to speech seems ok in Igo Primo though going through all speakers so it can work
Anyone any ideas please
Salut Petrut sunt si eu din bucuresti si am o navigatie dynavin pe un mercedes w203 din 2001 si vreau si eu patchul pentru desktop windows ce 5.0
se poate cumpara direct de pe site, item 1 din pagina de wince 5.
Mai am o intrebare daca win ce e in chineza nu sunt probleme nu adica am acoo si updetul pt engleza?
Ai tot ce trebuie in patch.
Salut, ups scuze anteriolul mesaj l-am pus la un reply !
nu stiu daca se poate 3g sau wifi. Vezi daca poti conecta un usb stick si il poti accesa.
Mi-am facut o mufa USB mod si am incercat prin ea, se pare ca nu vede, nici wifi, nici storage , nimic nu misca ! doar ca si conexiune cu PC lucreaza . Nu lucreaza ca host sa fie o treaba hardware sa se mai poate face ceva?
nu, nu ai ce ii face, sorry.
Hello. if i buy Wince patch and install for Dynavin platform D99 i can see this menu http://dynavin.com.ua/sites/default/files/d99_platform_1.png
and i have 5.0 version, i need patch 5 version-yes?
tnx.
all d99 come wince wince 6.0. so you need wince 6 patch.
It runs on Motor One M1(Multimedia Central´s) ?
http://www.m1-motors.com/
It runs WinCe 6.0.
Salut, eu am un GPS allview 8802 , e cu win ce5 am instalat pe el MioPocket 4.0 ,merge oglinda! Daarrr, imi place sa sap prin el, oare wincepachul tau merge pe el ? e MESADA 2413 , 43,8 RAM,ARM960 s3c2413, la 320x240 65k culori,NANDFlash 914mb, ce am uitat? aaa... vede sd pina in 2 gb si are iesire mini USB, mi-as dori sa pot pune wifi sau 3g, oare merge?
Hi, I have an Erisin ES960F Chinese 2din hu with win ce6.
BSP VERSION AIVCE6_NANO_Rel1.03
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800 x 480 pixels, 65536 colors
ResidentFlash: 4.98mb
NandFLASH: 56.8mb
\\Plugins
Application Data
My DocumENTS
NandFLASH
Program files
Recycled
ResidentFlash
StorageCard
Temp
Windows
(Chinese writing)
Will the patch work?
Regards CJA
yes, a custom one.
Buy any patch and send me an email to request custom patch.
Will be sent in maximum 24 hours.
Do you have a picture of what the radio app looks like?
I'm assuming it will do radio
Hi, I have a Chinese 2din hu with win ce6. Reading through your site and blog I have seen 1 similar hu.
This is what I have.
Program memory 112 mb | Storage memory 5.02 mb
BSP version ACVCE6E VB_rel 1.00.5.02
AT8X0 6.0
Win embedded CE 6.0
117 mb
ARM1136JF-S AT840
800 x 480 65536 colors
\\Plugins
Documents and Settings
GPS Data
My Documents
Nflash
profiles
Program files
Storage Card
Temp
Windows
(Chinese writting)
Will the patch work?
yes, a custom one for your partitions will work fine.
Buy any patch and send me an email to request custom patch.
Will be sent in maximum 24 hours.
Hello,
i installed the patch for WINCE 5 and wait now for the wifi patch.
is it possible to use wifi and tmc with ftdi seriell simultaneously?
greetings
not possible due to driver conflicts.
maybe i can fix it in a future release.
hy there.i just want to ask you about a ES868GBP product with wince6.0.The motherboard is AIVCE6_NANO_REL1.03, Windows CE 6.00.3122, 117.8 MB RAM, ARM1136JF-S AT840, 800X480 PIXELS, 65536 colors.I would like to know which patch would work for me.The main shell looks like the second picture( http://www.golfmkv.com/forums/showthread.php?t=107203), the one with blue(navigation, e-book, music , picture).10x in advance
P.S. : i don't want to look silly, but are u a romanian?(by the name Petrutz).I'm waitting for your reply.Cheers
i need partitions list to be sure.
yes i`m romanian :)
Dear Petrut,
Please show the Structure of SD card after installing of patch. I put my navigation software and wince together on SD card but I don't run any navigation programs. but if I put only wincepatch on SD then I see program icon after startup of desktop. So what is going on.
i don1t understand the problem.
you installed wincepatch,OK
you put some navi software on same SD, OK
then use system tools/shortcut creator to put valid shortcuts on desktop, or edit icons path in iphone menu if you want to use iphone menu to launch apps. Instructions in readme first file.
Sorry, a piece of my message disapear, I've both the WinCe 6.0 patch for TID 7501.
Hello,
Yesterday, I just bought the wincepatch
>
I've a TID7501 with WinCe6 /Novada 2450/800x480
I've just install the wincepatch with no issues but when I launch the desktop.exe I get the famous error:
There is no application associated with 'Desktop' run the application first....
Do I have to install any firmware ? If yes, where can I get it ?
Thank you in advance for your support.
Jean-Marc
sent email with solution :)
latest winca firmware sucks !!!
I've the same problem with patch,
I've a TID8952 with WinCe6 /Novada 2450/800x480.
Do I have to install any firmware ? If yes, where can I get it ?
Thank you in advance for your support
Piotr Grzeszczyszyn
if you are my customer, you can get it. just send me an email.
The Structure is as follow:
FLASHDISK
My Documents
Profiles
Program Files
SorageCard
Temp
Windows
chinees signes (I think a shared folder)
chiness signes .lnk
Do you need a Picture of the deivce, I found two devices which looks similar : HASDA H-988 and OMT-8243
Regards, Peter
you can try to do usb mod on your unit. The default usb is not for wince.
also a custom patch will work fine.
Usb mod? How ?
Could you please provide me the custom path?
Where and how do I pay , is paypalmpossible?
Regards, Peter
I opend the device, i have two mainboards and no clue which one should the usb be soldert to.
Can I send you the two pic and youb tell me which could be nearly the mainboard ?
On one ( where the pgs is) i found a 5 pin with description GND, ILL, XD, TX, RX. Could be there are some more letters on the ending but the connector is covering them. Is this usb?
Regards, Peter
read tutorials please, there are pictures there.
the gps board is the one with the gps antenna attached, usually a small board.
you can buy any pathy on my site and request by email a custom one, that will be sent in 24 hours.
Hi Petrut
My unit is (I believe) a smdk2450 board with wince 5, the letters on the screen are so small that I can't read it proper.
My only problem is that I have build “by myself” an USB-TMC and I have the drivers for it and the unit has a USB Port at the front, BUT, when I plug in to the unit a software is automatically starting which is a player for USB Sticks.
I can't get the popup for installing new device driver. How can I disable this annoying software, so that the OS driver screen can pop up? And how can I change the resolution on the unit?
I would be very thankful for help.
Kind Regards, Peter
Hi, I have a XTRONS TD717G.
BSP Version AIVCE6_NANO_Rel1.03...
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
What patch do I need for this unit?
Thanks.
Hi Petrut,
I found this:
\\Plugins
Application Data
My Documents
NandFLASH
Program Files
Recycled
ResidentFlash
StorageCard
Temp
Windows
(Chinese Text).Ink
I hope this is enough information.
Let me know if you need more.
Greetings, Ron.
need partitions list
Hi Petrut,
I found this:
\\Plugins
Application Data
My Documents
NandFLASH
Program Files
Recycled
ResidentFlash
StorageCard
Temp
Windows
(Chinese Text).Ink
I hope this is enough information.
Let me know if you need more.
Greetings, Ron.
yes, a custom patch will work.
buy any patch from site and send me an email requesting custom one.
OK. I bought the WINCE 6 patch.
I will send you email now.
Greetings, Ron.
I opened my HU to mod an usb cable but I found already usb connector on printplate of HU.
1) what is that? wherefor can I use it?
2) how can I tether with HU?
best regards
Hi
i have an dvn-e46 dynavin win6
is it nesessary to install first the win 6 patch and then the wifi patch? or i can just buy the wifi patch and do my work?
also can i use a random wifi usb stick as well?
hi i have a gps unit says toyota. it has wince 6 but dont have any maps or software on it. Also when i click on gps nothing appens. looked on gps path and it says something about igo and storage path. also wanted to know if i can swith form were the maps are located (use the other sd card slot or usb port) because previous owner said sd card for gps is not working. and if you have the maps? thank you
it is a witson W2-D9108T for TOYOTA
i don`t offer maps or navi software. If the gps sd card is dead, then NO gps, ever.
also the patch is not compatible with your system, sorry.
Hallo,
i have a Maxyon Energy 2DIN Device.
NOWADA
NWD_TT4X0A Multiplatform 6.0
Windows Embedded CE6.0
93,7MB RAM
ARM1136JF-S TT4X0A
800x480 Pixels, 65536 colors
BINFS: 76,6MB 76,6MB used 0MB free
NWDFlash: 5,04MB 1,01MB used 4,03MB free
Program memory: 92,7MB 23,1MB used 69,7MB free
Storage memory: 1MB 68kB used 956kb free
Is this Device compatible with your Patch?
Thanks!
run total commander and tell me partitions names
Hallo,
Therese was a more button at resinfo!
now IT shows:
Nandflash 39,9mb. 39,6mb Dresden
Storagecard 1,83gb 1,82gb free
TotalCommander shows the following:
\\Plugins
Application Data
BINFS
MyDocuments
NandFlash
NWDFlash
Program Files
Recycled
StorageCard
Temp
Windows
yes will work fine.
Hello Petrut, I am wanting to get the patch for the NWD2450 win ce6, but the unit i want to install to has had a failed attempt of mio..... on the startup of the Nav screen, ( once i press the Nav button from the menu, the system hangs on the "welcome to Navigation System" screen. If i get your patch, will this be able to be installed, and repair firmware of unit?..
Cheers...
tell me exactly what unit you have.
model, type, radio screenshots
I opened my HU to mod an usb cable but I found already usb connector on printplate of HU. 1) what is that? wherefor can I use it? 2) how can I tether with HU? best regards
Hi, unit is found here..
http://www.ebay.com.au/itm/7-Car-DVD-GPS-Dual-Antenna-DVB-T-MPEG-4-Player-Stereo-/220824271926?pt=AU_Car_Parts_Accessories&hash=item336a26fc36#ht_16507wt_1031
trying to paste screen shot of the frozen screen, but no luck..
its a blue screen, words "Welcome to Navigation System". has frozen on this screen everytime i attempt to start the nav system. the Mio install log said install complete, and then froze on this screen.... hope you can help, ( and your patch looks better!!! wish I had of found you first!!!
cheers,
Jarrod.
email me and request a firmware to try.
during the install i got an error message... Couldn't create directory '\ResidentFlash\$MSD$'
... my system is this one.. Waywell WD6050 with i go8
http://www.golfmkv.com/forums/showthread.php?t=74989&page=3
Hello Petrut,
i have an AV601 from Auvidio (wince 5)without TMC.
Did you know about it?
i need a wince hack and the Wifi adon.
Best wishes from Germany
I have a China RNS, never looked which WINCE is in (I assume its Wince5). Now when I press the NAVI button, the screen remains dark. I opened the unit and the GPS module looks like a Nowada 2450. May be the content of the flash memory is destroyed or may be the hardware of the GPS module is dead. Is it possible to load your wincepatch also, if the GPS module does not start?
no, the gps module is dead. contact the manufacturer for another one.
thanks petrut for your quick response
I was wondering if I could do the usb host hack on my unit.
Resinfo.exe shows a Nowada 2450 running WinCE 5.0, but the motherboard seems to have the gps unit implemented on board and not as a separate card. Looks like this one:
http://img846.imageshack.us/i/img5545.jpg/
the module in right side in the image looks like a gps board !
Thanks Petrut, that module is on the top of this new picture.
http://img193.imageshack.us/img193/7665/imgp0878medium.jpg
The gps cable however connects on the motherboard at the botom left part.. The module itself has a small wire like antenna (5cm long) attached to it and no identifying marks at the pcb.
then the gps board is built in. you have no way to make usb mod.
Not sure if the WinCE 5 patch will work. Here is the info I got when I ran Resinfo.exe:
Risetech RT GPS
Windows CE 5.0
39.1 MB Ram
ARM ARM920
480 X 272 65536 Colors
Let me know if it will work for me and if so which one I need.
Ty!
not compatible with your unit. too old, low ram.
Hi has anyone been successful in getting live traffic on primo 1.2 on there dynavin without a tmc input if so can you post details
thanks
Hi Petrut!
Will the patch on this car navigator? System wince 6
http://www.wincalcd.com/en/products_view.php?id=186&str=Indexabout
Yes will work perfect
Hi,
It will work on this board type?
Product Item No
HGFY-6828
send me partitions list and all info requested in tutorials.
run the tools.
Resident flash:432MB 216used and sdmmc disk
system:Samsung SMDK6410 6.0
Windows Embedded CE 6.0.3122
96,8mb Ram
ARM176JZF-SS3C6410 (800mhz)
yes, a custom version should work. I cant guarantee desktop functionality but everything else will work.
3g patch also will work?( usb flash drive read, but the usb modem no.LEDs in modem blinking correctly)
with the right modem, huawei e1550,i think so.
This is a device: http://www.wondeproud.com/product_1_1_1.html
Certainly navibox not to die?
there is always a risk...but if you have the original firmware you are safe.
The original firmware is only in the device-I do not have a copy ...
Hi Petrut!
I have a Navibox HD unit and im wondering if this will work for it?
CPU ARM11 / 800 MHz
with a custom patch, maybe.
send me more details about partitions
Hi Petrut,
please, when you have some time,
1) Do you know if your wincepatch, WiFi patch,3G patch will work with this unit?
http://www.aliexpress.com/product-fm/352548654-2din-in-dash-Special-Car-DVD-GPS-for-Hyundai-Accent-with-GPS-TV-RDS-IPOD-USB-wholesalers.html
ID:0B4C-80110830-211110-484E03-20100701
Ver: 128E-1260-6026-110707(Windows@ CE 6.0)
Resinfo results:
Nowada_2450
NWD_242250 multi-platform 6.0
Windows Embedded CE6.0.3122
111MB RAM
ARM1136JF-S AT550
800x480 pixels, 65536 colors
Storage
NWD FLASH: 7,91MB
7,79MB used 124kB free
NAND FLASH: 38,2MB
548kB used 37,7MB free
StorageCard: 3.83MB
1.84 MB used 1.99 MB free
2) And if yes, whether can work adapter BT-ECU OBD-II (CAN) bluetooth ( http://www.check-engine.ru/cars.php?list=carinfo&carid=119) and USB mod Wifi adapter simultaneously?
Best regards
wincepatch and wifi will work fine.
no way for 2 usb devices in same time.
Hi,
I bought a waywell WD6018 car dvd car whose specs are here:
http://waywell.en.alibaba.com/product/451024069-200157538/Waywell_Car_video_for_SEAT_ALHAMBRA_IBIZA_Navigation_Bluetooth_Radio_IPOD_Touch_Screen_Video_Audio_Player.html
here's a video of the unit
http://www.youtube.com/watch?v=rYj-URIJ_Vc&feature=related
Its running windows ce 6.0
Is your patch compatible?
Thanks
sorry, not compatible.
I have the wince 5.0 patch running great on my Dynavin V5....thank you very much. I was wondering is there anyway to download Wince 5 updates or upgrade to wince 6.0 on my system?
not possible.
Hi Petrut,
Do you have any plans to port Android to those devices?
Best regards,
Djuby
not possible.
Hi Petrut,
please, when you have some time,
1) Do you know if your patch will work with this Roadrover unit?
Resinfo results:
BSP Version: PrimaCE6EVB_rel9.04
TT4X0A 6.0
Windows Embedded CE 6.0.3122
95.8 MB RAM
ARM1136JF-S TT4X0A
800x480 pixels, 65536 colors
(from WR-Tools ResInfo)
Storage
NAND FLASH: 107MB
1.55MB used 105MB free
StaticStore: 93.7MB
41.2 MB used 52.5 MB free
2) And if yes, do you know if it needs a USB mod and if Wifi will work?
(Actually connecting a USB Flash drive shows up as USB disk and I can access the files on it...)
Best regards
yes, i can make a custom patch for it, but after holidays.
wifi will work too.
Hello Petrut,
I sent the money for the custom patch and Wifi.
Partition list:
"Storage Card"
"StaticStore"
"NAND FLASH"
Will send the DeviceId later by email for Wifi.
Thanks
Excellent!
Happy Holidays Petrut!
Hi,
My SD card crashed and I tried to login to download another copy but my login is not recognised. Do logins expire after a certain time?
no. send me an email with your purchase copy to verify account.
hi
I have the dynavin product with this serial number: 8297 - 82a4 - 6011 - 090725. wince5.0
which pach is available for me?
item 1 from wince 5 section
the system sayd me data flies missing
i try but don't start
in readme file there is link for data files and how to add them in wincepatch folder. Please read it carefully
all ok many thanks
Hi.
I have a new Erisin ES818G one din unit and im wondering if this will work for it?
Also will the Track Next/Prev work with the new audio player or not?
I mean the external buttons on the unit
not compatible with your unit, sorry.
Hi.
It looks as if I have reflashed the english language firmware as all I am getting now is square boxes instead of words is there anyway of getting it back.
Also when I tried to install the wince 5 update it came back and told me there where files missing is this to do with the language problem.
Would be grateful for any advice.
Cheers
just go to settings and change language to english to get rid of those boxes.
and about missing, files, read carefully the readme and download data files folder.
As you can guess I,m kind of new that this so Thanks for that managed to sort the first problem, with the second one should I replace the program files folder already in the wincepatch 5 folder with the new one or should I exract the folders from the other program files folder and pasted them into the folder in the wincepatch 5 folder.
extract program files folder from data archive and add it in wincepatch folder, this way you`ll have a big program files folder.
Hi.
I've just downloaded your patch for wince 5 and after reading the instructions when't to download the firmware update but the site is down so was wondering where I could get the firmware update to change it to english.
Cheers
Scrub that managed to figure it out.
Cheers
Hi Petrut
I recently bought a VW 2Din unit for my Seat Leon, it works great but I cant change the logo, the logo button in th setup doesn't work. Can your patch fix the logo or let me change is? any extras unlocked would be great, Im mainly interested in the logo change, here is my unit details:
Nowada_2450
Windows CE 6.00.0
111.3 MB Ram
ARM1136JF-S AT840
800x480 pixels
65536 colors
Thanks!!
Mario
Nothing I can do, sorry
Greetings Petrut,
I am new to your blog and I would like to purchase your patch. After running ResInfo.exe on unit via SD card I have Dynavin E83 with following Info:
[Mesada SMDK6410 6.0 / Windows CE 6.0 3122 / ARM1176JZF-S S3C6410 (666mHz) / 800x480 pixels / 65536 colors]
Some issues I would like to resolve are:
1) Change WinCe to english.
2) Use iPhone via USB cable to unit.
3) Play navigation audio/text via car audio.
4) View/play mp3 video.
Please advise if you have a patch available for my units OS and if some of my issues can be resolved.
Many Thanks.
Regards,
Jimmy B
no, i can`t help you with your issue.
Hello Petrut,
Disappointed to hear.
Everywhere I read you said you have patches for all Dynavin,s. If not you would create one.
So, there is nothing we can do?
At least can you help me to change WinCe to English?
Thanks,
no patch is compatible with your system, sorry
Can you advise or direct me, how to resolve usb connection with iphone. Wince window pops up in chinese. Is it looking for a driver? How do I start the onbord keyboard to enter data. I have no problem connecting to memory stick or ipod. I have wrtools, resinfo, cecmd on sd card.
Thanks,
Thanks,
you can`t connect iphone using usb. not supported.
Hi I had acar dvd gps (Kia Optima 2011 K5)
Ver: 112D-112D-6026-110213(Windows@Ce 6.0)800×480
Storge memory:113508 KB
Available: 94660KB
With steeering wheel set and bluetooth
Which patch work with it and how can i use 3G and internet with it,Plz replay on my e-mail
Thanks
i need complete details. run the tools from tutorils and send me the results. Also a link to the unit.
Hi Petrut!
I own a China Din 2 Navi Radio Name: MFC-7001
Will your WinCe6 patch work on it? Do you have a complete patch wich the Wifi patch for using my Samsung Galaxsy S2 as Modem to get into the Internet?
Tanks
Sorry its a MFC 7002 Radio
run the tools from tutorials and send me the results, with pictures of the main radio menu too.
new Info:
nwd_2450 wince 6.0; 111 mb Ram, 320x240 pixel;
made some pictures if you wanna see.
I got also into Windows Control Panel, explorer etc. nice mostly everything on Chineese, but working fine
Petrut, I purchased WinHack and Wifi back in october 2010. I had my EW-7711 wirless USB working with my phone but I had the SD card crash so I had to redo everything. I have Dynavin V5 with WinCE 5. WinCE keeps asking for the driver name when I plug in USB wirless device. Suggestions?
Never mind Petrut. I was using the wrong file. Everything works now.
Hi I have a DYNAVIN D90 platform. Which patch is the best upgrade please. How do you install?
look if is wince 5 or 6, and get the right patch.
all instructions are provided.
Petrut, I watched the video and see no sign of the radio or bluetooth screen for the phone. How to you find them using the patch?
you can`t.
wince side is completely cut off from the rest of
the system. is only for gps board !
I've just found this place, nice job.
However i've not found the infos i need, so i ask here.
The FLAC support on the new audio player does use playlist and / or .cue format files?
FLAC support is only stereo or can do also multichannel FLAC? If this is specific to some model only, please give me a hint. Thanks.
Forgot one thing: Flac with 24/96 audio can be played?
flac support is only in gps mode, so only stereo.
player supports playlists.
I have a question: where to locate the 3g modem? If the modem is hidden in the glove-box, and receives GPRS/EDGE signal the speaker make characteristic "tidit, tedet" noise.
Hello Petrut,
I'm very interested in your patches.
I currently own a Eonon G1301 ( http://www.eonon.com/Car-GPS/1-Din-Car-GPS-DVD/G1301.html) which according to ResInfo is using the Nowada 4250 board.
The system is WinCE 6 and seems to be in English (haven't seen any kind of dialog in Chinise). My mother language is Spanish.
Now the questions:
1) Is this device compatible?
2) What would I need to buy from you to have the system as most as up-to-date as possible?
3) I would like to perfom the USB-mod to have 3G Internet access and I would like to know if it would be a better idea to solder a powered usb hub (and taking power from the car battery) to plub more than 1 device?
If there's any information missing let me know. You can see the full details of the unit on the Specifications page link.
Thank you.
A few more questions:
4) Will this USB-mod allow me to connect a TMC receiver and use it in iGO Primo?
5) Same question goes for attaching a ODBII interface.
Thank you.
4.no. you can use 3g and get online tmc.
5.yes, but 3g will not work anymore if obd drivers are installed.
yes, this is perfectly compatible with my 3g patch.
Just buy wince 6 patch, item 1 from wince 6 section, and 3g patch, and a huawei e1550 modem for 100% compatibility.
And no, dont solder hub, just an extension cable.
Thank you for your reply. I just asked you a few more questions.
If I solder just an extension cable, can I then attach a USB-hub to it?
Thank you again.
yes
Thank you for all your answers.
Here in Argentina I can get the 3G Modem Huawei E176 HSUPA USB Stick. Do you know if this model will work? Also, could you please explaing a little bit more about "online TMC"? I couldn't find anything on the Internet.
Thank you very much.
should work, but i can`t guarantee that.
online tmc is available in igo primo, if you have a tmc license.
i have all installed
How can i autostart 3g connection and igo?
system tools app for 3g connection.
igo must be added manually in desktop.mscr from program files/desktop, after the line with iphonetoday. If you know a little about computers you can do it.
Hello,
I have a AS-7609 by Audiosources it is based on wince 6.0 Nowada 2450 board, I bought a patch for Nowada 2450 board, fallowed all instructions in read me file, First I applied the patch, thinking that i have a English WINCE but I was wrong i have Chinese so I fallowed the instruction to flash wince, that didnt work automatically ( nothing happened when i power off power on and went to navi screen, so i tried runing UPGRADE.EXE from navi screen, it went thru but then i applied the wincepatch pointed GPS to Desktop.exe and when i click on GPS i get an error in chinese it says something about DESKTOP.MRC please help
i hope you got wince 6 patch.
just reinstall, dont use upgrade.
Patch is tested and working on that unit.
Petrut
You talking about WincePatch (wincepatch folder)right ? Will that give me English WinCE?
yes, 99% english
How can i restore system menu back to original state. I.E - desktop to e-book
Many thanks
reflash or manually edit lang.msd from nwdflash/msd/app
Hello,
Does your patch support this unit?
http://www.szmaisun.com/show.asp?ArticleID=834&proname=&key=MT-8001
Yes, wince 6 section item 1.
Hello Petrut, It has been a while since I have followed the info for the Dynavin I have a v2 or v3 Dynavin in my e46, what do I need to purchase to for the latest and greatest?
Thanks
Wincepatch and 3G or wifi :)
Hi - I've just installed a nameless double din.
Resinfo shows
EONON
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM 1136JF-S AT840
800x480 pixels, 65536 colors
Program Memory
16.4 used 96.2 free 113MB
Storage Memory
72KB used 5.15MB free 5.22MB
Is this something I can buy a patch for ?
thanks
GT
run cecmd.exe from tools folder and send me partitions list.
Hi mate,
it shows
\\Plugins
Application Data
NandFLASH
Program Files
ResidentFlash
StorageCard
Temp
Windows
chinese_characters.lnk
buy wince 6 patch, any of them.
i`ll send you custom patch in 24 hours.
Hi Petrut,
I have just paypalled a patch - you should see a payment come through from gtilby@etc etc.....
cheers
GT
Hi, Petrut.
I've installed Mort Player by .cab files in my DVD device, but it doesn't work. It appears an error window, but in chinesse. My question is, if I've already patched my device with your patch, can I reset it (point 1 in your README 1ST tutorial) to get it in english?
Thank you. (Please, excuse me for my bad " english").
mort player doesnt work correctly on chinese devices. It needs .netcf 3.5. Even if you install it correctly will be slow and menus will not fit screen.
Anyway english firmware links are in readme file when files are available and safe. If there are no links, no firmware, or not safe.
Bad news!!!.
This unit is compatible http://factory.dhgate.com/car-cd-player/special-car-dvd-for-ford-focus-fod-803gd-p37062009.html?, i need your patch because i want to get the 3g and WIFI and i have the change possibility.
This unit came with WinCe 6.0 and have a mowada board. Sorry, no resinfo now, but if you need, i could get it...
yes, both 3g and wifi will work on it. But you need usb mod
Hi Petrut,
Before I buy your WinCE6 patch, I need to ask if the patch can enable my All-in-One in-car unit to read SDHC cards. This is the main reason I want to upgrade.
Unit info as follows: -
Nowada_2450
NWD_2450 multi-platform 6.0
Windows Embedded CE 6.0
ARM1136JF-S AT840
800x480 pixels 65536 color
Program Memory - 110MB
Storage Memory - 1.0MB
NWDFlash - 1.98MB
NandFlash - 54.7MB
wafer
any nowada 2450 wince 6 can read sdhc cards. You tried?
Hi Petrut,
I've tried on the 2nd SD card slot which does not take SDHC cards. Let me try the GPS SD card slot & report back.
Wafer
Hi, Petrut!
I have installed your patch and it works perfectly in my car, but, when I shut down it, then I start engine again in a minutes, and DVD starts on original dispay, original firmware again, I must start desktop mode by clicking Navigator icon again. Is it normal? And sometimes, Mp3 player doesnt remember the last song that it played. Is this a standby problem or I did something wong?
The navigation apps dont work.
Thank you.
yes is normal. the unit will always go in radio/dvd mode, and you have to switch to gps mode.
I have no idea about the mp3 player, it should remember last song... try naviplayer not nitrogen.
Also there is no navigation software in my patch, only icons, you must link them to your existing navigation software. read manual about how to do that.
Ok. Thank you for your answer. Another question, can I install another mp3 player, like Winamp?
Thanks again.
Hi Petrut!,
some time ago I acquired the patch for mowada 2450 with Wince 5.0 and 480x234 res. Well, I change these device for this
http://www.alibaba.com/product-gs/466876593/2011_new_model_car_dvd_players.html
More pics
http://img62.imageshack.us/img62/7619/osda.jpg
http://img685.imageshack.us/img685/6835/radiof.jpg
This is the Resinfo out:
under System tab:
BSP Version: AIVCE6_NANO_Rel1.04...
Windows CE 6.00.3122
115.3 MB RAM
ARM1136JF-S AT840
800x480 pix
65536 colors
Do you think your patch will be applicable in this unit ?
If you need, I have a install image of this firmware/software.
Thanks!
Kind regards
Adrian
i dont have a patch for this device, sorry
Hi Petrut,
Already installed a few times your programs and everything was fine, but now I have a problem with the radio: http://www.witson.com/en/displayproduct.html?proID=100903537
Patch should work because it is Nowada 2450 wince 6.0 boards
The radio is probably the Chinese wince.
I did reflash as described but will not turn on automatically update
See my photos:
https://picasaweb.google.com/102847810706258851910/NewVw8Inch?authuser=0&feat=directlink
Please help,
Best regards,
Andy
regular wince 6 patch should work fine.
There is no firmware for this device in my packages, so don`t try to reflash it with internet found stuff...
Any news on the guide for accessing Live Traffic on Primo 1.2?
you need tmc license, get it legally or from internet, i can`t help with that. It should be in license folder from igo. Also write in sys.txt
[tmc-http] enabled=1
Hello!
I'm spanish, and I've got a Chinese DVD in my car. It's a Nowada 2450 with Windows CE 5.0, and I'm interested in your patch, but I have 2 questions:
1- Will I can to use a MP3 player with equalizer? I'm interested in this, my firmware has a mp3 player with only bass and treble regulator.
2- I play music from my SD card, and then I stop my car and take my key. When I start my car again the mp3 starts from the first song of SD always. Will your patch fix it? Will MP3 player start from where it stopped?
Thank you very much, and please excuse me for my "English".
yes to both questions.
BUT, this will work ONLY when system is in gps/desktop mode.
So will play only mp3 from gps sd card, using the software provided. Existing built-in software will always be the same.
You want to say that I cant install a new mp3 player with equalizer? I like "Nitrogen" from MioPocket.
you can, i also have nitrogen and others, i just say you will use them in gps mode not main dvd mode.
Hello Petrut!
A query:
Any idea how I can change the boot logo WITSON W2-745P
Thanks!
not possible using my tools. You need original firmware from manufacturer.
Hello there!
very interesting site!
I have a chinavision multimedia player http://www.chinavasion.com/product_info.php/pName/king-cobra-7-inch-hd-touch-car-dvd-player-wifi-gps-dvbt/
to
and it doesn't want reboot. as you see it runs on win ce 5.0 with samsung 2440 processor. is it possible that you write (or alreday have) a patch??
thank you very much
no, will not help, sorry. That model is not compatible with my patches.
Oh, is it possible to write it? or Is it possible to install some other software based on win ce 5.0 platform
yes, any software you can find on internet.
ok..my device has Fm radio, dvb-t TV, gps, bluetooth. Do you have any suggestion for the software which can control that?
in the meantime, after 5 emails manufacturer send me new firmware. I try to boot my system with this new firmware via my SD card. Nothing happened. System is still booting from the windows root. How can I avoid that. Thanks
Hello,
I recently bought (last night) the wince patch 6.0 for AS7608 v4.2 and installed it with no problems. The only problem is that i cannot find out how to enable onscreen keyboard in wince. Can you help me ?
make sure you have the screen calibrated. In desktop mode, in bottom right corner there is the keyboard icon. Also set taskbar always on top if you want to use keyboard in office apps.
Also keyboard will automatically popup when needed.
calibrate screen with a pen. then you can close all apps.
about keyboard, you mean you can select eurokeyboard, cekeyboard, etc, but doesnt appear?
strange. never had issues. I`ll try to find a solution for your device.
Thanks. What about reinstalling your patch ?
try that too :)
I tried reinstalling. It does not work. Everything works ok except that keyboard does not show! any other suggestions?
i have no idea.
i`ll investigate the issue.
Until then, you can try to reflash if you have the firmware, go to original wincepatch folder, delete eurokeyboard.reg from msd/app/registry/custom and startkey.exe from msd/app and install again using this modified wincepatch folder.
Hi Petrut,
1) Do you know if your patch will work with any of the Rosen head unit?
2) And if yes, do you know if USB mod and Wifi will work?
Thanks
i know nothing about Rosen. Give me more info.
Hey Petrut,
I tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?
I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.
Unit setup:
http://imageshack.us/f/526/mcd901setup25.jpg
Nav main menu:
http://imageshack.us/f/12/mcd901nav25.jpg
just exit the igo program :)
then you`ll see the REAL navigation board menu and run the tools as instructed.
Hi Petrut,
Perhaps a strange question but i have a roadrover headunit and am trying to get WIFI working. It runs on CE6 has USB ports and i have a RT3070 Wifi USB stick. When i plug it in de unit asks for the driver. I also installed the Ralink 2870 drivers. When i give the path to the RT2870.dll the unit does not accept it. Will your Wifi Pach solve this?
Rm
I dont have a patch for rover units. But should fix it of the USB adaptor is compatible
Hi,
Does the WinCE patch contain an FM radio application?
no
Hi Petrut,
thanks for sending the custom version!
The patch installed correctly (I think) except for the *illegal software* message after the reboot at the end. Not sure if there was any damage but I was able anyway to launch IPhone and most of the apps seem to work. Really nice!
From some app, I'm able (sometimes) to access the desktop and the task bar. So I'm really happy for all that.
3 questions:
1) Could not see the keyboard anywhere.. Is it gone because of Flyaudio?
You mentionned earlier Internet drivers not compatible with this unit...
2) Still, does the USB mod will create a usable USBHD in WinCE?
3) What would be required to make the Wifi works on this unit? (in theory at least)
Thanks for your amazing work and support!
1.yes
2.no
3.not possible even in theory.
Hi, Petrut.
I've installed wincepatch on XTRONS td717g. Evrth is fine, except taskbar on desktop. It's always hidden!!!
I tried to resolve this problem by editing file "registry.reg" from winpatch distributive.
In line:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Ontop]
@=dword:00000000
I replaced 0->1, and then install patch again on clear system. Hasn't helped.
How to correct?
Regards
Igor
i think your unit wince core files doesnt have taskbar support. Even if my explorer.exe have it, if there is no support in firmware, you can`t enable it. Same think with keyboard, i found crap units ( flyaudio ) with no keyboard support at all.
Ok...
dear Petrut,please...
now I have to solve the last problem:
When I open a file with an mp3 player ... I hear the sound from small speakers of the device....
instead of the original software from Audio DYNAVIN you hear the stereo AUX ...
how do I route the sound of any player (like Core Player) to the car stereo's AUX ... ?
Please, just this ... help me!
i never had a unit like yours so i can`t help you. Maybe there are some setting on the unit, i don`t know..
I ask, please, if there is a method to read this h264 compressed video in the original player (DVN-E83) ... I might add codecs ?!
Please...
not possible
Hello Petrut,
Really awesome work you did!
I hope I can install it on my Flyaudio E7572NAVI (for Prius)!
Resinfo results:
FLYAUDIO VERSION: 10.07.18
FLYAUDIO 6.0
Windows Embedded CE 6.0
119 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
1) Is your patch compatible?
2) Is it reversible?
3) For Wifi, do I need to do the hardware usb mod?
Again, outstanding and fantastic work!
internet pacthes not compatible with flyaudio, sorry.
also desktop doesnt work, only iphone menu. i can make a custom one if you want.
Yes please. Let's do that.
What other info do you need from me to make the custom?
Oh I guess what you need is this:
(from WR-Tools ResInfo) Storage
ResidentFlash: 1.65MB
282 KB used 1.38MB free
SDMEM: 7.51GB
10.1 MB used 7.5 GB free
anything else you need?
no. just buy any patch from my site. I can send your custom one only on Wednesday, i`m out of country until then, business.
OK Done.
Waiting for your custom one.
Many thanks!
Hello,
I have installed W2-D762CI witson in Citroen C4, with Win CE 5.0, the patch serves this model?
In such a case that offers benefits to install it?
Thank you.
not compatible with your unit.
Dear Sir Petrutms,
I am very interested in your patch ... I have a device DVN-E83 for BMW X3.
I want to know any questions, please:
1) with certainty, I can install it on my device?
2) my device has WINCE 5.0 or WINCE 6.0 ???
3) now my wince is in Chinese, I can change it to English?
4) after I install your patch, if I want, I can return to the original, as before the change ?!
4) My main problem is read the files video (via USB) compressed with h264.
With your pach are you sure I can read and hear the audio through the AUX input of my car stereo (now with CORE PLAYER I hear only through the small speaker DVN-E83!) ?!
Thanks for your kind answers.
not compatible at all with your unit, sorry.
Hey Petrut,
Does this work on a Caliber MCD901?
Pics and more info:
http://autoaccmontfrans.nl/files/Caliber/MCD901.jpg
http://webshop.caliber.nl/media/Manuals/MCD901_manual.pdf
http://webshop.caliber.nl/media/Manuals/MCD901Quickstartguide.pdf
Yes, will work perfect. Get nowada 2450 patch for it, wince 5 or 6, I don't know the version on your unit
I just tried to find out which version is running on my unit, but I can't find "System Information" anywhere. There's a settings button at the top right of my screen in Radio or SD mode, but it only shows a few tabs: ASP/Video/General/Radio/SD/etc. In the tutorial section you mention "the main menu of the GPS board". How do I get there?
I do have a main menu with 10 buttons as you can see in the image above. Though, the settings button at the top right takes me to the same settings menu as Radio/SD mode.
Unit setup:
imageshack.us/f/526/mcd901setup25.jpg
Nav main menu:
http://imageshack.us/f/12/mcd901nav25.jpg
Good news! I'll check my unit version tomorrow. :-)
Hello Petrut, congratulations for the Patch.
Is it work with Witson w2-d745p ? Can i use the internet function from my smartphone ?
Another and important (for me) question, the device is installed on my Peugeot 307 and i lost the access to the cars computer (adjusting time, etc), i know that there is a newer firmware that corrects this problem, giving access to the computer from de SRC button (pressing and holdingo on the wheel control), do you have this firmware or can recommend me someone who has it ?? Thanks a lot !
you need usb mod for internet.
i can`t help you with your other issue, sorry.
Hello, Petrut!
I have a question.
My sistem:
Nowada_2450
NWD_2450multi-platform 6.0
Windows Embedded CE 6.0
111 MB RAM
ARM1136JF-S AT840
800x400 pixels, 65536 colors
I used the device with version 7.8 (upgrade not to make). Step 1 "reflash" i did as is written in "readme", but the system automatically wasn't updated. Therefore has passed to a step 2. After installation WINCEPATCH at start there is an error:
"EndForEach" without "ForEach"
Line 26 (\NwdFlash\$MSD$\App\memoryadjust/mscr):
EndForEach
It can occurs because of overflow NandFlash? (info from "Tools ResInfo":
NandFlash 1,82 MB
1,82 MB used 0 kb free)
Sorry for my english.
Thanks!
please login to your account and download 8.3 wince 6.
this bug is fixed for most systems in the latest version.
Hello!
I have the same problem as described another user on another forum:
I have a Chinese all-in-one Witson W2-D745P car GPS.
I have run MIOPocket 4.0 setup, but it got stuck to : "Attempting to reboot device".
I then powered off & on the device, and the result is that the gps menu loads forever & nothing happens. (All other functions work: radio, tv, dvd)
- And the bad thing is that I am not able to access file manager or something similar to repair the registry. I' m guessing it's the registry MIO changes that did the damage.
These devices actually store all registry changes but don't change anything in Win or other folders.
I have the same problem as described another user on another forum that has posted here:
http://goo.gl/MXRZR
Please, help me!!!
Thanks,
DreamerArgentino
yes, my patch can fix it.
please get item 1 from wince 6 section, then send me email and ask for firmware.
Hello Petrut, thanks for replying
Another question: But how to install the FIX would you mention? Since, I have no access via browser setup for the problem above.
Thank you!
DreamerArgentino
the firmware update is autostarting at boot.
Petrut, sorry for my English ...
Before buying, I would understand if I am going to work in my situation ...
What I'm saying is that the PNA has clearly lost access via SD-card ... So where or how to install the patch??
Thank you again!
DreamerArgentino .-
trust me, will work ! If not, i`ll refund you !
It worked wonders!! You're a genius!!!! Thankss!!
hi petrut,
i bought eonon device in the link http://www.shopmania.co.uk/audio-video-equipment/p-eonon-d5103-special-car-dvd-for-opel-astra-14427724
1-what patch exactly should i use?
2-this device comes with usb and ipod cable that i extended in the car drawer.. will this usb and ipod cable still be working ??. i mean when installing the patch will the wince still see those connections??
3-what exactly do i have to do to get internet after installing the patch??
another question please
4- is there a video on how to open the device and install the usb wifi thing??
1. you need item 1 from wince 6 section.
2. patch will work only in gps mode, will not affect any of the other menus/systems.
3. you need to buy wifi patch, a wifi adaptor ( edimax 7711 series ), and solder a usb cable to gps board. There are details about usb mod in tutorials section.
petrut please ,
will i see the usb memory flach drive when conected to the original usb cable from inside wince after patch in item 1 ??
memory flash drive is 16 gb
NO. you need usb mod.
Petrut did you find time for adapting registry for my modem with newer firmware?
Yes, I'll send you a test version tomorrow.
OK, I can't wait ;-)
Hi,
I have a question. In my system (SMDK2450, WinCE5), the "StorageCard" is called "Storage Card" (with space). This means the script will not run. I started Windows Commander, however, I am not able to change the name of the Storage Card to StorageCard (because the lack of a keyboard). Running desktop.exe is not possible (system freezes).
Can you help please (it's a witson system (W2-D762CI).
Thanks!
tell me all partitions names in total commander. I can make a custom patch.
Hi Petrut,
That would be great!
These are my partitions:
|APP
|
|Data
|--> F_ini
|
|FlashDisk
|--> $MSD$
|--> Desktop
|--> FBOOT
|--> Froot
|--> Programs
|--> Windows
|
|Storage Card
check mail.
The wincepatch does not work for:
Witson W2-D762CI.
I have given it up... Iphone today works fine, but all other apps crash. I think Witson has made a trick in the OS to stop us from hacking it :)
Thanks for your help though. May something clever pop up in your mind to get my system going, please send me a message.
Greets!
Hi,
I have just bought our WINCE patch. Congrats on a great soft.
I have a couple of questions:
I was looking forward to resolve the igo bluetooth integration problem. I saw on golfmkv forum that it was resolved in this patch.
However i still can´t make igo go to phone app when somebody is calling. When igo is running, i miss all my incoming calls. Can it be fixed?
This is my main problem, that drove me to buy your patch.
Total commander explorer does not see my media sd card. Therefore i cannot select mp3 files in your mp3 player. Or create a playlist. How can i make your software detect my sd media card?
Here are my specs:
Bsp version: aivce6evb_rel1.00.5.02
AT8X0 6.0
Windows embedded ce 6.0
117 mb ram
ARM1136JF-S AT840
Best regards,
about your igo issue, that depends by the main firmware, not the gps board. really strange, i never heard of such problems. The unit usually switch to bluetooth when you have an incoming call.
Also the patch can see ONLY gps sd card, and usb conencted to gps board ( usb mod or built-in on dynavin ).
mr petrut,
i had purchase your wince patch. i want to use elm327 base USB cable. It use ftdi serial driver. I try to use the driver inside Program Files but when i plug in the ftdi serial to usb, it keep on asking driver name. I'm using maisun mt-6501 window ce 5.0, thank you
ftdi driver is not yet supported for wincepatch on wince 5.
it will be available soon. If you have the driver, just add it in storage card/program files/windows, and the regsitry for it in nwdflash/msd/app/registry/custom.
Will your patch solve my issue? GPS software will not load, just keeps resetting. I have a Maisun wd6050 was working fine until a few months ago, starting freezing up saying out of memory, now won´t load at all. Everything else on the GPS side of the unit seems to be working. Thanks.
sounds like a gps software issue. Just use another newer release of your gps software.
How many transfer uses gps tracking system, for example, for an hour's drive?
every 15 or 30 seconds, depends how you configure it.
for 1 day with 4-5 hours of driving, will take about 2 mb of data.
Hi
My Problem is the installation from Wince patch/ EXE . If I put the Buttom to Install, than it comes the Windows for INTSTALL NEW or UPGRADE. Nothing is going on, but it becomes a new window with the note--- files are missing, please read- readme.doc. And now the question..... where I find the readme. doc.... or..... what can I do? The download was correctly from wince patch, but the Dynavin 4.V , Motherboard Mesada 2440, in my car, does not find any files and cant loading anything by new install.
Can you help me
Harald
Many Thanks
the readme file is in the archive with the files. Is the main instructions file. Read it carefully and you`ll fix the data missing error.
Hi Petrut. You mentioned uploading a guide for accessing Live Traffic on Primo 1.2 on 12th October. Where can I access it?
not ready, sorry. Will be posted on main page when ready.
Any news on this Petrut?
I have same device as Rudysan, Folders:
GPSData
NFlash
SDMMC
( + Regular Windows CE 6 Folders and one Chinese named folder)
BSP Version: AIVCE6EVB_Rel1.00.5.02
AT8X0 6.0
Windows Embedded Ce 6.0
117MB Ram
ARM1136JF-S AT840
800x480
Can you make this WinCE6 English and provide new front end? Thanks!
yes. Buy any wince 6 patch and send to my email a request for custom patch.
ok, now will this patch allow me to change the time on my unit from 24 hour clock to 12 hour clock?
It will allow you to access control panel like on any pc, so i think yes.
hi,
I have a erisin unit, i bought your wince 6 patch for it
and i get this error when installing:
Couldnt create directory'\ResidentFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\ResidentFlash\$MSD$$")
BSP Version: AIVCE6_NANO_Rel1.03...
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800*480 pixels, 65536 colors
please could you tell me if i need a custom patch or is there something i can do to rectify this problem, thanks
sorry i entered the wrong proplem my proplem is
Couldnt create directory'\NWDFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\NWDFlash\$MSD$$")
run total commander and tell partitions names. You need custom patch. EMAIL me the results.
hi Petrut
Please can you idetift my system
data is
BSP version : AIVCE6EVB_Rel1.00.5.09
AT8X0 6.0
windows embedded CE 6.0
118 MB RAM
ARM1136JF-S AT840
800X480 Pixels 65536 colors
also is it possible to get reflash package for this one
best regards
Mak
Hy Petrut I bougth a Chinese Multimedia Unit 7"Crown G-9971, runs on Windiows CE 6.0 800*480, which patch I have to buy?
there is no firmware for reflash for this board.
patch can be custom made if you send me total commander partitions list.
Mr. Petrut, I did tried out your last suggestion (just touch the \StorageCard\NWDSoftware tekst), but it don't go away. The software I use, do like accently as: wince 5, Nowada 2440 boards, 480x234. If I go to next step, it says: \Device, but still no "Root". May I ask you to please advise?
i have no idea what is wrong or what you did to get that error. You can try to reflash on your own risk.
Mr. Petrut, how do I reflash? Do you have a program to reflash it with? Do you maybe another program that I can Use? Please advise if you will. Kind regards.
http://www.mediafire.com/?mwzotnttyzy
try on your own risk.
instructions everywhere in my threads on golfforums or internet.
Mr Petrut, I did look for several hours on internet, also on golfmkv.com, but I can't find the threads to reflash. I put the files on a 256 Mb SD-card, but can you please tell me how to start the card/ the software. Kind regards, Alex Blokker
Mr. Petru, does the SD-card need to have a specific name?
extract all files in root of sd ( autoupdate folder and nwdtcali.exe), insert in gps slot, power on, switch to navi, wait to update. if update doesnt start try again. if still doesnt work, nothing i can do. Remove sd after a successful flash.
Is you product available for the Zenec NC2010. I notice with their V10 WinCE 6 firmware they have bootloader access through the SD_Card with the following files.
Bootc8.nb0
Logoc8.JPG
Nkc8.nb0
After booting from the SD card it then updates the OS, application etc from files on the USB stick.
Not working on zenec. Tried and doesnt work
Hello Petrut,
Are still busy making Windows CE desktops became available?
I buyed a hack from you fot the TID7501 but now I have another radio.
Can you still help me with this WinCe 6.0 model?
http://www.lightinthebox.com/Car-PC---DVD-Player---Surf-Wifi-3G-Internet---7-Inch-Motorized-Touchscreen---GPS---Support-iPod---DVB-T-SZC6342-_p178905.html
another picture
http://www.aliexpress.com/product-fm-img/457065180-Car-PC-DVD-Player-Surf-Wifi-3G-Internet-7-Inch-Motorized-Touchscreen-GPS-Support-iPod-DTV-wholesalers.html
Hope to hear from you a.s.a.p.
regards,
Arien
patch is not working on this model.
Eventually i can make a custom one but only with iphone menu, not desktop mode. All other features of patch should work fine.
I have edited your patch, and now its working :)
If you want, I can send you a copy.
Can you help me to enable a hardware keyboard?
I guess I need keboard drivers for WinCe 6.0
regards,
Arien (BockyWocky)
sure, send it.
8.3 patch contains drivers for keyboard, but not all keyboards will work. try simple ones...
I send your the edited patch by email, please check.
kbdmouse.dll is already registered in HKLM\Hardware\Devicemap\Keybd\
I’ve tested 2 types, there is a sound reaction when a hit a key, but I cannot type.
Hi, I need help.
When I push NAVI button on my Mesada 2440 board 480x234 WinCE 5.0 (WinCEhack 8.0) an error message appears ("MSKBoot create file failed"). If I close window, there's a new window Sysupdater, I can use touchscreen and navigate on gps sd card folders but I don't see executable files. If I close Sysupdater I see a blue blank screen.
Could you help me?
you probably did something wrong with internal files and corrupted internal memory. You need to reflash. Or try to long press on that blue screen and tell me if a menu appears. Usually that screen is the default locked nowada desktop.
system got corrupted somehow, you need to reflash.
usually the patch for that board comes with firmware. If you dont have it, email me.
Salut. Stii cumva daca modemul Huavei E1752 este compatibil? Ca sa nu-l campar degeaba... Mersi
da, este
sory petrut, im annoying again, what site sells the GPS board??? nowada no responses , mesada no responses, , ebay , deal extreme doesnt exists this board... again , excuse me for the english . greets
www.szwaywell.com, www.szmaisun.com
Okay it's me again. Now I've got a bigger problem. I did'nt get any gps signal after the WinCE Patch. Perhaps 1 but after some second it freeze. Is the patch changing anything of the gps???
nothing to do with gps...
Dear Sir, i do have a "Chinese Unit" with no GPS "Root" anymore. This happend after a (long) use of the reset knob. There some tekst that says: /StorageCard/NWDSoftware.exe. Do you know a way how to restore this? The GPS processsor is a Samsung High performance processor ARM920T.
With the most kind regards,
Alex Blokker
is normal, just press on it and will go away. then set back gps path.
Mr. Petrut,
I do try your suggestion, but it wont work. The tekst will not go away. If I go to the next step, there is in the upper left corner the following: \Device, but no "Root"or folder present.
Kind regards,
Alex Blokker
Hallo,
I bought just today the Wince patch for Nowada 2450 WINCE 6 - 800x480. The installation is quite easy, well done. But I have a big problem: I don't get any sound out of my speakers. I have a VW7086 with the newest firmware. What can I do??
Okay, now it's working. It was the problem with the code of the mp3 files in the WinCE menu. Thx anyway :)
Bought the patch CE6 today, all ok. Only thing i wonder about is upper list in the iphone menu. Can't you make the round circles for gps, media and so on larger. Almost impossible to hit them right.
not possible. But please calibrate screen, will help alot.
It is calibrated several times, but the problem is still the size of the circles not the calibration.
Hello. I bought a car multimedia device: http://www.alibaba.com/product-gs/347365455/AL_8007_1_DIN_Car_DVD.html
It based on Nowada 2450 platform, WinCE 6.0. I have a ZTE MF100 3g modem. Can I connect it with my car device? Thanks
zte modems will not work. But you can connect a supported modem if you add the usb port and use my patches.
Do you have a list with supported modems? And about USB, the device has already usb. Or not? Is a mini-usb in front of device and read memory stick.
Hi Petrut, I installed wr-tools resinfo. wince now useable. ITaskmgr not working. MTK apollo 5.0, 118m ram, arm1176jz-s
mt3351 (468MHz), 800x480. Do you have a patch for me?
no, sorry.
maybe a custom one will work, run total commander and tell me partitions names.
Hi petrut, im very interested on your patch.. good job making it!, please excuse me for my english, but i have a problem just now with the gps ..
trying to change the wince to english , i stucked at sysupdater screen, with no screen responce , BUT, i weld an usb to the wince side (exactly explained on your excellent tutorial), when i can handle the sysupdate screen with a keyboard, i choose a wrong file... im an id*ot, now , when i enter the navi, wince just keeps with a bar , charging... i tried everyting but no responce... any solution please? good bye i wait your answer mate! :)
try again to reflash. there is no other solution. If the bootloader is corrupt, the board can`t be recovered.
What unit you have?
thats the problem, i think the bootloader is dead :(, i cant acces to sysupdater...
y have a mesada 2440 (nowada n607) gps board.. and the unit is a VTH .. any ideas? :(
a new board... sorry.
VERY thanks for your answer pal , greets
Hi Petrut. Did you have any luck tracing people who have online traffic working in Primo 1.2?
yes. i`ll upload a guide tomorrow or friday.
Hi Petrut. Did you upload the guide? Where can I access it?
Hello Petrut, please contact to me ASAP
you email me :)
my adress is in login section...bottom of page
Hi Petrut
Which player will play mp4 please..
Bazzle
I wanted to know which version i should use
info is as follows
RIZETECH
RT GPS
Windows CE 5.0
39.1 MB RAM
ARM ARM920
480X272 pixels, 65536 colors
Storage
NandFlash 27.0 MB
SDMMC
plus is their a way to back up the current software incase anything happens
patch not compatible with your board, sorry. I can do a custom version but iphone menu cant be used, you have only 39 mb ram.
Answer from the dynavin.freeforums.org:
"Just choose AUX in the main menu (assuming you don't have the AUX connected)"
having problems..... cannot create \storagecard\program files
also were do i find the firmware download for the Sinoembed board..... the head unit is made by lightinthebox
1. sd card full
2. different name for sd in your unit. Run total commander and look at drives names.
I want to listen mp3 using the nitrogen player, but my dynavin e39 radio still plays songs. Do you know how to turn off all sound sources except wince?
no, but i`m sure there is a way. Maybe set sound to zero ?
Hi Petrut,
today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?
get the firmware for it to be sure...
i still have no idea why you had issues, because wince 6 patch is 100% SAFE.
Just for information, I never did get online traffic to work via wi-fi. I think you need to ensure that, in Dynavin units, you have a TMC receiver as without this you will not get any kind of traffic (TMC or Online). I did try various mods. to the sys.txt but still got nothing so I ended up uninstalling the wi-fi patch as traffic was all I really wanted. If anybody out there has got online traffic to work and is willing to share their sys.txt for Igo Primo, I would give it another try!
i am 100% sure i have customers with online tmc working in primo 1.2
i`ll try to track some of them to give me more details about how they made it work.
Thanks Petrut - much appreciated.
Any luck Petrut?
After purchasing the patch in the system can run programs under Windose mobiles?
will run all wince designed programs, and some windows mobile ppc 2003, maybe windows mobile 5. BUT ONLY some programs work, and most of them need to be extracted, patched, to be run as exe files.
Thanks!
I have Dynavin DVN-MBA.
Are you interested run programs inernet radio after buying patches.
http://www.jeyo.com/radio.asp
http://spb.com/pocketpc-software/radio
http://www.resco.net/WindowsMobile/Radio
no one will work. On wince 5 dynavin, you can play radio using tcpmp ( included ), but only some stations work.
On wince 6, no live streaming.
On wince 6, no live streaming. ???
tcpmp for wince6.0, under the brand GPS Navigator.
Hackchina
http://www.hackchina.com/dlpre.php?lang=en&id=44017
Other question:
Is it possible to save permanent the desktop background color:
http://monikon.fm.interia.pl/ftp/desktop.png
?
in next release.
also for the wince 5 ?
only for wince 5. in wince 6 is already possible.
Is there a way to auto load a program at startup in the Wince 5 patch? I want the media player I use to boot up on start. Is that possible?
Thanks!
deadwiz
yes, edit desktop.mscr and add a new line after the last line with iphone menu. Use the same syntax. I`ll post a tool soon on the site that will add stuff to startup very easy.
Awesome! Thanks!
you latest change log says - bluetooth support ( control panel ).
what does it mean?
is the phone book feature available?
thanks
no phonebook. On some units OBEX file transfer is supported. That`s it for now...
Hi Petrut,
Just buying and downloading "Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480".
But in the Readme file, it stated that if i need english firmware it's available at request. Can have that firmware ? Because my current Wince is in chinese language.
My Board Information is :
- Mesada 2440
- Wince 5.0
- ARM920T S3C2440A (385MHz) Res 800x480
- Have NWDFlash, NandFlash, adn StorageCard.
Hope you can help.
thank you
I need to know exactly your unit type and model
It's china made Head Unit. But due to some problem with factory installed gps module, i have replaced the gps module.
The picture of the HU like this : h http://img406.imageshack.us/img406/845/th62inchmodel1.jpg
and the gps console : http://www.wincepatch.com/images/navitb.png
thank you,
I have a Dynavin D90 platform (WinCE 6?) and would like to tether to my Android phone.
Once I buy the WinCE patch, could I tether over USB rather than WiFi?
It would save having to install a separate 12v-to-5v transformer/usb charger for the phone. Would be a simpler and more elegant solution for me than WiFi tether.
no, usb thethering is not possible. Only wifi, or 3g modem.
thanks for the reply. wifi it is then.
I have one more question:
1. Is there an easy way to change icon size on the desktop view?
2. It is possible to change background image on the wince loading screen?
1, not possible at all
2. only manufacturer can ( need special firmware files , i dont have them )
I use your patch and i have a problem, i asked it before in here but still my problem continue. I dont open the virtual keyboard. ı tried all the ways but i dont do it. Please help me.
really not possible.
make sure screen is perfectly calibrated so you can press the keyboard icon on taskbar.
yes i calibrated the screen perfectly. I click the keyboard icon on taskbard but nothing opens.
Okay Petrut. If I don't use iphone menu I need to create a shortcut to Primo on the desktop. I tried this in shortcut creator but nothing appears. Can you run through the process? Is there another way of accessing Primo without iphone menu? I can't get anything to show up on online traffic either.
make shortcut in nwdflash/desktop. It works, trust me :)
About traffic, i think you need to enable networks in sys,txt, search on forums, i csn`t help, no traffic info in my country so i never test it, but many customers have it working.
I made the shortcut okay so now I can start up Igo Primo without using the iphone desktop but it runs very slow and jerky. It didn't do this before so it must be something I have done in installing the patch. Is it possible to uninstall the wi-fi patch as I don't think I will get traffic to work and this is the only reason I wanted it. Is there anything I can do to make Igo run as it did before?
i have no idea why primo works slow on your unit.
Try another primo version ( there are many releases... ).
You could remove wifi patch ( install wincepatch over it ) and see if will be faster.
To install wincepatch again (over wifi patch) do I just go through the installation process again and choose "upgrade" or "new installation"? Do I remove all files relating to wi-fi patch first?
new installation. It will remove all wifi patch stuff.
Hi Petrut,
Connected to the internet okay via wi-fi patch but now the Navi program (Igo Primo 1.2) keeps coming up with a memory (cache) error and closing down. Also seem a lot slower on the Navi program than before. Any ideas?
never had the issue. I have many customers with primo 1.2 and wifi working fine. DO NOT use iphone menu in same time with primo and wifi. Not enough RAM.
Hi Petrut
I have a Mesada_2443 equipped with ARM920T S3C2443 chip (Wince 5) capable of 800x480 px. Which one of your products should I buy ? Would I also be able to upgrade my OS to CE 6 ?
not possible to upgrade wince 5 to 6.
item no 8 from wicne 5 section should work. If doesnt work, i`ll make a custom one for your unit
Hi Petrut
I got the GAPI DEVICE MISMATCH, where do I get the fix?
Thanks !
you have an unsupported unit. remove gapi completely.
Everything seems to be okay apart from this: when I click on Igo Primo button from iphone interface, it says: GAPI DEVICE MISMATCH". Can this be sorted?
use system tools app, there is a gapi fix there...
Installed the WinCE patch and all seems ok but I am a little confused over the WiFi patch instructions. It says to install DeviceID.exe on the SD card and then enter desktop mode and run total commander - is this AFTER i have put the SD card back in the Dynavin? How do I email the deviceid.txt from the Dynavin as there is no email without an internet connection? Sorry if this sounds silly but I am finding my way here.
It's ok - I figured it out. deviceid.txt is on it's way!
One other thing ... how do I link the Igo Primo icon to the navi program?
read manual... all info is there :)
Hi Petrut,
Just about to buy the patch for WinCE5 - will I need to access the USB to GPS board on the rear of the unit or is the whole process done from the SD card?
You don't need access to any USB interface. Whole installation of Petrut's WincePatch is done from the SD card.
Thanks - that's great. I will go for it!
I have bought patch, it works perfectly, but I have some more questions:
1. I would like to a navigation program to run after iphone menu is loaded. I added a new run line in in desktop.mscr, and the result is that first comes desktop view, then loads iphone menu, and afterwards a navigation software starts. My question is, is there any way to skip the desktop view? I deleted the sleep time line, and the iphone menu starts almost immediately, but still i can see the desktop view ;-( Should I delete explorer.exe and startkey.exe run lines in the desktop.mscr file? Is there any solution?
2. If I set Time and Date settings, they won't save, ex. I'm setting time zone and my local time, switching of a navigation device (dynavin D90 Wince 5), then powering it on and the hour is wrong, and the time zone is unset. Any solution?
Waiting for answer!
Regards!
1.You cant bypass desktop view. Is essential for patch to work. Without it, no registry, drivers, etc will be imported at boot.
2.old issue, nothing i can do. You can use gps time sync program from tools in iphone menu, but on some units it doesnt work, and need to run it manually.
Hi,
would it be possible to connect an external usb sound card to my Dynavin and make it run with a driver on wince?
Can I use more then one usb devices on the plattform (usb hub)
thanks in advance!
No
hi Petrut, how are you? wish you fine.
Petrut, is that possible to use live tracking via wifi that conneced to my mobile phone? How to use that?
Thanks
you need tracker program from me and a tracker account.
email me for a request.
Hi Petrut. I purchased the Wince V6 patch package, I have a Dynavin e39 whit thenowada 2450 board and ARM1136J. I followed the instructions to detail. Now I didn't know if I needed to flash or as you say reflash (the instructions are pretty cryptic on that), but anyway I tried several times and it just wont load on its own at bootup (from power up with the factory SD), so I went to the next step and did the Wince Patch install. It seems to work, I get the desktop, Iphone screen etc. NOW
it seems slower, overall, and there is no real explanation on how to make the system auto start the Navi, after going through the desktop load and the selecting the navi icon on Iphone to then load the navi.
Did I miss something is there something else I should do? DO I need the reflash ?
Thanks
Chris
first, firmware to flash ( reflash ), is not available for dynavin wince 6 units.
Also system shouldnt be slower, no way. Try a reinstall.
If you need to autostart, set desktop.exe in autostart menu in main shell setings.
That way system will start desktop, then iphone menu.
If you need a specific program to run after iphone menu is loaded, you can add it in desktop.mscr file from sd/program files/desktop. If you are not good at computers, email me and i`ll send more instructions.
Hi Petrut :-)
i boght this device from ebay: http://www.ebay.de/itm/AUVIDIO-NAVI-AUTORADIO-2Din-DVBT-DVD-GPS-NAVIGATION-/180727289615?pt=CE_Auto_Hi_Fi_Autoradios&hash=item2a142f970f#ht_15049wt_1152
and i would run yor patch and will try 3G and so on...
who is the real manufacturer of this device? It´s not Audiovision, that i know ;-)
on the device is working wince 5.0, can i upgrade to wince 6.0 an what´s the benefits i profit from?
if you need pictures from the Hardware, mainboard or something else, feel free to contact me :-)
thanks in advance
JugglerXL
that is a very powerful device, with very nice menus, i know the brand. They are manufacturers ( Auvidio ).
I`m sorry but my patches will not work at all on your unit, i never had one to test and pretty sure that the system is well locked.
Yes :) very nice GUI and menue... that´s why my decision for the AV601... it looks a bit more "professional" like other China-RNS i think ;)
Auvidio= manufacurer ? are you sure Petrut?
i have access to the WinCE 5.0 main system and backuped the complete NAND-Flash Drive so i find some interisting files like a UIDATA.res with 50MB for example... but i´m an absolute noob and when i try to extract the res file i became an error called incorrect filename :(
Petrut, if you are interested or may have a closer look on the files, i can send you a copy by mail... ;)
so long... :)
Hi, perhaps I'm stupid but I followed your installation instructions it has install and reboot, but at the point where you say i must choose cardstorage/programfiles/desktop, there isn't any desktop folder in my programfiles folder on storage root only inside are : Calc98CE, Close, EuroKeyBoard, Fileviewers, Flash, Games, hODB, MSPlus, Naviplayer, NetCF3.5, nitrogen, pocketrar, pocketpicture, screenshot, sql3.5, Tcpmp, Tools, totalcommander, xnview pocket...... but no desktop folder, could you please help me ?
best regards
Robin
I have no idea why folder is missing, but copy desktop folder from wincepatch/program files to sd/program files
ok done everything works like a charm your the BEST !!!
I would like to buy your WinCE Patch from You Petrutms for my Dynavin E39 WinCE 5, but first I have few questions:
1. Did the evolution of the WinCE 5 stop at version v8.1 (Does it mean no keyboard, mouse, and a working OBD software support?)
2. If I buy WinCE Patch now, do I have an access to the newest update, or do I have to buy new version every single time?
3. On the Wince patch demo video I saw that there is a possibility to start automatically desktop view, but is there any chances to start the iphone look interface and then afterwards to launch navigation software (ie.: IGO) also automatically (by default)?
Waiting for answers,
Regards!
1.For the moment yes
2. Free updates for life
3.is possicle to autostart any program you like
Hi, i would like to use software to take screenshot of OS (WinCE 6), i sell witson dvds and i would like to use screenshot on my announces, i can pay for service, how can i contact you ? Thanks
Hello Petrut,
For 2 weeks I have bought a TID 8928 with a "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. Then I bought the WINCE6.0-PATCH from you. But after I have installed your patch I mostly get a white screen with "Boot Authenticate is Error!". I have tried to fix the problem by installing the original firmware for the Navigation-Board. But I have only found "NOVADA 2450 N117 PCB V5". The Navigation-Board is "NOVADA 2450 N117 V6". After I have installed the Firmware the screen only shows "No Signal".
Have I killed the Navi-Board now or is there a chance to make it working again?
i`m sorry, you killed the board.
There was a solution for your error, next time please email me when you have issues, don`t reflash with files found on internet.
Hi Petrut,
which part of the board I have killed?
Is there any possibility to replace the "killed" part?
I have learned to repair Radios and televisions.
the bootloader ( software ). To fix it you need to jtag the board and need original files. I don`t have the files ( for jtag, firmware, etc )
Hi Petrut,
today I have gotten a new "NOVADA 2450 N 117 PCB V6"-Navi Board with WINCE6. But I'm afraid to use your software. Last time I have used your patch I mostly got a white screen with "Boot Authenticate is Error!". How can I fix it, when this error appears again?
I have the Dynavin E46 in my BMW (V5 on E90 platform) but have been told by the seller that it is NOT a TMC model. Can I still use the patches and connect to traffic via wi-fi?
yes, many customers use my patches for that purpose.
Hi Petrut,
I have installed your patch on my Dynavin DVN-MBC with a Nowada 2450 board running Wince6. Can you help me with reflashing this unit? I cannot find the firmware anywhere.
because there is no firmware available for your unit.
Petrut, does the 8.3 version enable bluetooth data link on a nwd2450 wince6? that's about all I need - get the unit to connect to the internet via bluetooth and my cell phone. If yes, is connection established autoamtically/ settings remembered through soft reset?
no, sorry. For now is just a simple bluetooth support, with obex file transfer one SOME firmware revisions. Is not stable. I`m working on DUN support. You can buy wifi patch, it does same thing, but you need a phone with wifi AP software.
thanks for the quick response. my unit does not have proper usb port (doesn't show up flash card as a drive in totalcmd) and I don't feel like opening the unit for soldering. Would probably sell this one and get something else as data trasnfer is critical for me
Hi Petrut,
Can you please confirm the correct patch for:
Xtrons Model: D711G
RIZTECH
RT GPS
WinCE 5.0.1400
46.3MB RAM
ARM ARM920
800x480
Thanks.
you probably need cuztom version. send to my email the details from resinfo and total commander, as instructed in tutorials.
Petrut,
I have bought wince patch 6. As you told me in VW GTI forum,
i have email you the resinfo for you to build a custom patch for my 2 din unit. Let me know that you have received my email and working on it. Thank you.
yes, check mail
petrus i followed your instructions but it keeps saying
data files missing read the doc what should i do
This is discussed over and over.
Copy program files folder from data800x480 archive in wincepatch folder.
hello petrut,
i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
with kind regards and hoping for a solution
Hi Petrut,
I am having a similar problem to one of your other customers. I installed the patch, connected my HWUN3 usb adapter but it is asking me for a driver name when I connect. It autopopulates with rt.....dll but when I click ok it keeps popping back up saying unidentified usb device. How do I correct this?
hello petrut,
i've your wince patch and wifi patch. but wifi only works when i started some devices manually. you've emailed me that you are working the problem but still didn't got an answer/update. i think i've found a piece of the problem. i see that the nandflash contains files that should not be there for example i see 3 other nandflashes in the nandflash file and a lot of strange files with names as symbols. do you have a program that i can use to delete files because now the system says it isn't possible.
with kind regards and hoping for a solution
Wrong chipset in your adaptor.
Buy edimax 7711 series.
Hi Petrut,
I've followed the instructions for and installed the 3G patch but am getting a pop up box "Enter the name of the driver for the USB device" box which stays on screen + there is no "Internet 3G" icon.
I'm running a Timeless Long TID-8952 BMW, WinCe 6, Nowada 2450,111Mb RAM. I have a Huawei E169 modem. The modem works fine on my PC and shows power when connected to the car DVD; other USB flash drives work okay. I notice that NWD directory is quite full if this is relvant. Do I need a custom patch?
Follows are some relevant screen shots (sorry about the quality):
http://dl.dropbox.com/u/4483458/DSCN0134.JPG
http://dl.dropbox.com/u/4483458/DSCN0128.JPG
http://dl.dropbox.com/u/4483458/DSCN0127.JPG
http://dl.dropbox.com/u/4483458/DSCN0133.JPG
http://dl.dropbox.com/u/4483458/DSCN0138.JPG
http://dl.dropbox.com/u/4483458/DSCN0141.JPG
Regards
Woodsy
1. Make sure you configured the modem on oc as instructed in 3G manual
2. You need to manually create Internet 3G connection on wince 6, follow screenshots from manual.
3. Make sure you have 8.3 patch installed.
4. If system doesn't enter driver name automatically at boot, something may be wrong, reinstall 3G patch.
For more details if you still have problems, email me.
Hi Petrut,
How can I uninstall the patch?, I have a problem with my navi software and I can't use it.I have a message:Illegal operation report, The software performed illegal instruction(MAIN)....
If I can't fix the problem I prefer to uninstall the patch and use the navi software.
Thanks
remove program files from sd, reboot.
I rebooted without the sd inserted and the patch remains installed.I rebooted from system tools, but nothing was uninstalled.
Internal files can't be removed unless you reflash. Sd files, just delete program files folder and set navigation path to anything you want. Internal files are useless without sd part, and will do no harm.
Hi can you please tell me how can i disable my id on desktop startup on win desktop start a card with my id pops up i press ok and desktop starts can you please tell me how to disable this please?
i have no idea what you are talking about
Hi, I want to buy your patch, but still looking if can I run radio from it or I need to use a factory installed software?
Playing a mp3, after turning off the device will it reasume from the last played song or will it play the first album/first song?
patch is only for gps side, you cant use with radio.
if you use the provided mp3 players, it will resume from last song/position.
I dont use your patch on my AS-7608 V4.2 device. I use it only once after this it didnt boot the StorageCard\Program Files\Desktop\Desktop.exe, I have 4 problem:
1.) Could you please say me how will i activate the screen keyboard. I try lots of way but dont do it. Please help me.
2.) When i start the device in navi mode it wants me to make a screen calibration, after i do it and press ok it wants me to choose the navigation path. When i want to explore my sdcard for choosing the desktop.exe it shows me nothing. My device dont read the storagecard. I dont understand, how will i solve this bug. I tried 4 different sdcard. It always asks me same screen calibration then choosing navi path then dont read the sdcard inside. I format sdcard with FAT format and named it as STORAGECARD. But the device may want me to named as StorageCard. Is there a case senstive. On win7 it automaticly make the sdcard name uppercase. I dont do it like "StorageCard". May be the main problem is this?
3.) I tried your patch only one time and saw that i dont touch the upper options for example close button (X), File, Edit, View.... Screen dont sit the screen correctly. How will i calibrate it.
4.) is there a way to use your patch without using a sdcard after install your patch on sdcard. I dont want to use a sdcard. Because of my second problem.
1. You must have taskbar visible ( set it always on top ). Then you can select one of the 3 keyboards.
2. name sd whatever you want. It looks that you have a hardware issue, sd card reader malfunction.
3.calibrate from mainshell of gps menu, touchscreen section. Use a pen.
4. NO.
ok i sorted out problem from parameter.
Hi can you please tell me why i got no sound in the windows and navigation mode on dynavin i just noticed it must i go to some parameter?
Sorry problem resolved car battery was low and effected the unit everythin is ok.
No Petrut i didnt put card in any other unit i ran the patch again on my unit because it was saying because i was getting a driver not installed message but after it would automaticly sign in the reason why i loaded patch again is because windows only saw 1 usb from the back the one with wifi adapter and i wanted to play music with the nitrogen with usb flash its my fault for messing around with the unit.do you have any thoughts? i wont mess around any more i promise.
Hi when i start desktop mode it asks me something about usb in chinese writing i have to close those windows and then it goes to desktop mode and immediatly after it takes me to iphone mode which i have to close and i have to take in and out the wifi adapter for for it see it before when i was going in to desktop mode the usb window automaticly signed in and wifi connection was available now it says usb driver error does any body know?
you said that wifi works fine. Now it doesn`t ? dont mess with the system. Wifi on dynavin is perfect, if you have problems you did something wrong, again. Not that wifi patch will work on one unit only, dont try to put sd card in another unit, it will kill the patch.
When system will enter in desktop mode the driver name will be automatically entered. Do not manually close driver window, etc.
can you please tell me how can i put igo primo in the iphone menu in gps section i have dynavin?
edit igo primo icon path. instructions in readme file.
Hi petrut everything works great with your patch v 8.3 and wifi is perfect.
Thanks for the support.
Patch worked like a charm.
Recommendeed
Hi Petrut,
I have a W2-D9200V with mesada 2440 board.I download the Wince patch for ANY Nowada 2440 , 800x480, Wince 5.0 and it works fine.The only one problem I have, is that I couldn't find the autoupdate for the NWDTCali in order to change the system to english language.
i dont provide them anymore because i had too many problems ( bricked boards ). Sorry.
I have just reinstall your patch and now all is in English.
Thanks you for the answer.
I have a Hualingan 8726 für Rover. There is a Nowada N303 board inside with NandFlash (64MB), 128MB RAM ... witch patc do I have to buy for it. I just want to run Navigon, nothing else.
then just install navigon on it, and set path to the navigon executable.
I dont offer support for gps programs, sorry.
Hi Petrut and to all last week i bought a dynavin e46 it was all ok but i took out sd card when i tried to put back i accidently jamed the card on top of the socket i tried to pull it out and i damaged the sd card what do i have to do it had the wifi patch and the win6 on the card when i install sd card it says no navigation software found what must i do buy wifipatch and wince6 patch or contact the dealer
?
If the system can't see the sd card, try another card. If still doesn't work, contact dealer, card slit damaged. Wifi and wincepatch you have them on email/server
How can i make a account do i have to register or what sorry i am a newbie?
i tried the sd card on p.c card damaged where can i get them on email server?
wifi and wince patch thank you petrut
Wifi is always sent by email, so you must have it in your emails. Wincepatch is always on the server, every customer have one account on wincepatch.com, so download it from your account.
Hi once again i bought the dynavin from dynavin shop in greece he programed and sent the unit to me i phoned him to send me the patches and he said no he cant i suppose that it is in his email account not mine anyway is it possible to buy from you the patches because i dont think i will get anywhere with him? thank you once more Petrut
yes, files are encoded to your unit. They dont have the tools to recode, or the permission to send files by email. If you damaged the sd, is your fault, always you should do a backup.
I can recode files for you, but you need to buy both patches.
ok i bought both patches whats my next proccedure?
yes i will buy both patches now if it is possible thats what im asking for.
Hi,
i've buyed the patch for 6.0 but i thing i need a custom on for Roadrover C7037VT, cause some paths are different. Ive took a screenshot from the root path.
send all resinfo/total commander data to my email.
hi.
i have 2din AOSINO AD6209.
** WR- tools ResInfo **
BSP version: AIVCE6VB_rel1.00.5.09
AT8X0 6.0
Windows Embedded CE 6.0
118 Mb RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
I have access via USB with pin 9.10.11.12.
I can add the patch Wince6?
greetings.
yes, will work. Probably you need a custom one, but will work. Also you can use wifi patch
Hey Sergio,
I have the same resinfo. Would you mind taking a picture for me of the board and sending it to me? it would really help me connect the USB to my board...thanks!
mo.anwar@gmail.com
Opps upgrade.exe and not update.exe. I copied upgrade to sd root.
upgrade folder in root of sd. start from total commander or windows explorer. If you have a custom wince 6 patch version, will not work. Patch is tested and working perfect.
Hi,
I am trying to install v8.3 from v8.2 but when trying to start update.exe from desktop nothing is happening. I copied update from file onto sd as per instruction. I noticed that the NWDFlash is almost full with only 168kb free could this be the problem. Please help?
Hi,
Will the patch work on this? Also will the wifi work?
BSP Version: AIVCE6_NANO_Rel1.03...
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800*480 pixels, 65536 colors
The patch will work, but I think you need a custom version. You can buy any patch and I'll send you manually the patch for your system. I'll need the resinfo data abd total commander partitions list, and task manager processes. Wifi will work if you have a USB connected to wince. If you can read a USB flash from total commander , is ok.
Hi Petrut,
I am interested in the wifi more than anything as I need a way to feed in traffic data. I connected the USB but couldn't read it in total commander. but if i put a media file in the usb, the unit reads with its usb reading program. does that mean the usb is enabled?
by the way...would you know how to do the USB mod on this board?
you need usb mod on this board, and i dont know to do it... i never had a unit like yours, i`m sure the pins are different. If you can get me the board layout ( look in tutorials to see an example of nowada board ), you can do the usb mod. Without it, no wifi.
:( if i send you a picture of the board, would you be able to help? I don't know where to get the board layout....I asked the manufacturer...but he wasn't helpful
i dont think so, but send it anyway...
Hi,
installed your Wincepatch and it is working good with Igo8 and Tomtom on Nowada2450 CE6 111mB ram unit. installed hobdrive software and running with standalone version. How can I connect Hobdrive to bluetooth ODB2 dongle using Wincepatch?
Hi,
I have just installed the Wincepatch desktop, but some of the text is in chinese. how do i fix that?
A few words here and there will be in Chinese no matter what I do. 99% of menus are English.
Make sure you have latest build.
Only cable for now for obd.
Hi Petrut,
Just to make sure I understand you correctly. I need to install v8.3 run the software needed and do the usb hard wiring mod to make OBD2 to work with usb cable?
Hi Guys
I bought the following chinese unit:
http://www.aliexpress.com/product-fm/430382797-Free-Map-HL-8164GB-7-0-inch-2-din-Car-DVD-player-GPS-for-SUZUKI-GRAND-wholesalers.html
which patch work ? also idont like the menu icons and colours can i change it ?
you cant change menus or colors.
The wince 5 patch for as7608 will work fine.
HI. I have a hualingan dvd player -
http://en.hualingan.com/html-en/product-qnxmhXRljQPA-BMW+3%28E46%29+DVD.html
Its similar to dynavin unit and runs windows ce5.
Which patch (if any) will work on my unit ? Thanks
the wince 5 patch for as7608 will work fine.
hallo,
i have a dynavin mbe-most and i would like to patch it completly.. also i want to be able to access to wince desktop, patch the wifi and 3g !!
so plz tell me what i need to buy and plz make me an offer.
thanks
You need to buy wincepatch for dynavin( check the unit for wince version, should be 5, if is 6 buy wince 6 patch ), and then buy wifi and 3G patch.
Hi Guys,
I just bought the following chinese unit.
http://www.aliexpress.com/product-fm/483980973-Free-shipping-Special-Car-DVD-for-Hyundai-IX35-Tucson-2010-2011-Car-DVD-GPS-with-CANBUS-wholesalers.html
Will your patch work? Also it has usb connection already....do I need
to do the USB mod still?
Thanks!
Hi Guys
I bought the following chinese unit:
http://www.aliexpress.com/product-fm/430382797-Free-Map-HL-8164GB-7-0-inch-2-din-Car-DVD-player-GPS-for-SUZUKI-GRAND-wholesalers.html
which patch work ? also idont like the menu icons and colours can i change it ?
i have no idea what board is inside. Run the tools as instructed in tutorials and send details about partitions and board by email.
thanks...I don't have the unit yet...just ordered...but the manufacturer told me they use the nowada boards...
where can i learn about your patch more...like once i get and install the patch...can i still use the old functions? like dvd, bluetooth, picture in picture etc.?
after further reading i understand that your patch will not be able to access the bluetooth phone function. so is there a way to still use the original software that comes with the device and use your iphone interface when i need to use wifi?
please let me know.
Thanks!
sorry Petrut...more questions...
First of all, you have done great work!!
I think I am confused to how the bluetooth calls work....
1. Lets say I install the wince patch and run the iphone interface. then i run the igo navigation. what will happen if i receive a phone call? can i receive the phone call through the unit?
2. If I am running the iphone interface and I need to make a phone call, do I have to switch to the original software that came with the unit? if so, do I have to uninstall the patch or so i just run the "Original Shell" icon.
Thanks!
you should watch the video from first page...
every original menu can be used as usual, only gps menu will be modified. If a call comes in, the unit will automatically switch fom gps/iphone to BT, etc.
Hi!
Device:
SMDK2450 Board 5.0
Windows CE 5.0.1400
102 MB RAM
ARM920T S3C2450 (400 MHz)
800x480 pixels, 65536 colors
Menu navigation is just out of the window choose the executable file.
Windows chinese. module marked HK913 v1.1
Proccesor S3C2451XH-40
Patch №9 - download, installation, but not work. folder on device named - Storage_Card but not StorageCard. Please, help :)
You have another model, so I'll rebuild the patch and send it manually in 48h maximum.
Thank you. I will wait.
Thank you for your work! The shell is started. But almost no one program will not start. (players, calculator, etc.). It looks like windows is strongly reduced. English firmware is not available as I understand it ... It is sad. Thanks again!
many programs should work. Games, office, some tools, etc.
All SMDK 2450 units have a really bad wince system loaded...
Hi Petrut,
About 3G patches, is that support for almost usb 3G modem brand or must be special usb 3G modem?
About the system, is that embedded into the OS system, or just add script and .dll files into the windows file? because if just the script and .dll files into the windows folder, it means the 3G device would be loaded after the system completely copy to windows.
About that price, is that including support for the next upgrade?
Thank you so much
Any modem that can be detected by wince is compatible. Best modems are huawei.
The patch is a complex set of dll, scripts, registry that are forced at installation in the wince system.
On wince 6 will always stay there until complete firmware reflash.
All upgrades are free.
Thank you for your great reply, I would like to buy it, may I get your email please?
Hi Petrut,
I just bought the following system
Road Emperor Volkswagen Edition - In Dash Car DVD With 3G Internet (WIFI, 2DIN, GPS, DVB-T)
Information about the system
- Board: Telechips TCC8900
- CPU Core: ARM 1176JZF-S (500 MHz)
- GPU: ARM Mali-200 (200MHz)
- Internal memory: 256 MB di RAM, 256 MB di NAND Flash
- External memory: SDHC (fino a 32GB) e drive USB (fino a 32GB)
- Operating system: Windows CE 6.0
GPS module: GS MediaTek-92m-J
Please, let me know what is the right patch I should download. My system doesn't match with the ones available under the wince 6 section.
Thanks and regards,
Maurizio
Sorry, none will work on your system.
Salut Petrut,
Am cumparat alt gps Eonon G2216 si nu stiu ce soft de navigatie sa pun pe el, am incercat TomTom7 si ruleaza nu ma lasa din setrile din tomtom navigator sa-mi setez antena gps cand apas sa selectez antena imi revine in meniul dvd-ului la setari gps si acolo imi arata semnalul la antena dat in tomtom nu pot selecta antena gps.
Ce imi recomanzi ca soft gps? am vazut ca merge Igo8 dar nu-l am actualizat din 2009 si poate sti tu ceva mai bun cu harti mai noi pentru europa centrala si de est.
http://www.eonon.com/Car-GPS/2-Din-Car-GPS-DVD/G2216.html
Caută igo primo... E cel mai bun.
Hi Petrut,
does your patch work on the Zenec ZE-NC2010 device, as i understand they of better quality than others
No, doesn't work at all. Zenec is a very complex and locked wince system, I played with one and damaged it, I sent I to repair in Germany !
Hola Petrut,
tengo el 2 Din
que esta roto el microprocesador de arranque,tu tiees algo asi o solo parches que tambien estoy interesado,
yo tengo este modelo pero sin 3G
http://exclusivecarauto.com/2din-wifi-ipod-2011-p-362.html
gracias
Was never tested on that unit but I doubt will work. Completely different hardware.
Hereby I would like to thank Petrut for his great patch and effort to help with my Dynavin V5 system. I had some problems, but it works perfectly now, thanks to his great support.
If you want to get more out of your device, you should definitely buy this patch, as the possibilities of your device can be endless.
Thanks Petrut!
Best Regards,
Mark
Hi,
I bought 2DIN dvd unit AS-7401. Could you please, let me know if your patch work on my model ?
Details:
Haoke
Platform_TYPE 5.0
WINDOWS CE 5.0.1400
101 Mb Rom
ARM920T S3C2440A (357 Mhz)
800x480 pixels, 65536
Best regards ,
Cristian
Will not work on haoke systems.
Is your hack compatible with the new 2nd generation FlyAudio unit for Lexus?
http://www.carlighttrends.com/Lexus_2009_IS_250_350_FlyAudio_Multimedia_GPS_p/flylexus.htm
Yes, except desktop function, 3G, wifi. Everything else works fine. Patch is not listed due to lack of interest from flyaudio owners. If you need it, buy any wince 6 patch and I'll send yours manually next week when I come back from vacation.
I'm a flyaudio owner, and I'm very interested in these patches. Is there anything I can do to help with their development/testing? Is it possible to mod the usb connection like some of the other devices you mentioned?
I am definitely interested in flyaudio units. I'm hoping to be able to write some apps for this. I just bought one a few days ago.
Couple of questions:
- What do you mean by the desktop function not working? You mean I won't be able to access the WinCE desktop at all?
- Since the unit has a USB connection, is there a way to get wifi working using this?
- Is the patch reversible? Can I set it back to the way it came stock if I need to?
Jaime, I also have a flyaudio, and I'm interested I developing some apps for it. Let me know if you decide to try this, or if yuu have any other ideas.
Yes, desktop will not work, only iPhone menu and programs. I had latest flyaudio unit and the USB is not connected to gps board, so wifi or 3G will never work. Patch is reversible.
Hi, I'm ready to buy. I want to make sure it will work with my radio which is exactly like this http://www.cardvdkit.com/index.php?cPath=8&main_page=product_info&products_id=125
Could the firmware also work?
I'll just wait for your reply and then go ahead and buy it.
Thanks.
JCarlos
Hi Petrut, I bought it a couple of days ago but had not had the time to install it. Looks nice, Thank you.
yes, this is the one of 100% compatible units: english firmware, patch, 3g, wifi ( need usb mod ), mnouse, keyboard.
Hi!
First of all!
Wow, I think your patch looks great!
But I've got a question.
I have a Zenesis(Dynavin) 2Din system for an Audi A4 built in to my car. This one runs on WinCE6.0.
I took a look at your litte sample movie, but I am missing the phone function in here. My radio has got a bluetooth function, so I can connect this to my phone. But now I am unable so send my contacts to the radio, so if I need to call someone from my phonebook, I still have to handle my phone. Is the function to copy my phonebook to the radio supported by your patch?
Thank you!
no, bluetooth is not running under wince 6, so my patch can`t do anything about it.
I don't understand.
Isn't my system running under wince 6 now then?
And my carkit is a function of the 2din system and connecting to my phone now via bluetooth. This way I can call by opersting the phone from my Zenesis.
Am I loosing the carkit function in total after installing this patch?
no dynavin unit runs on wince 6. Radio, bluetooth, tv, ipod, etc run un noname custom operating system, and navigation under wince 6. My patch will modify only navigation side of the unit, everything else will be the same.
Hi, I've got an TR089 the same as AS7608, with WINCE6.0 111 RAM 800*480PIXELS, you can see in this web
http://www.tradetec.es/DVD-GPS-TDT-VOLKSWAGEN-/-SEAT-/-SKODA-RefTR089
and my problem is the same as this
http://www.youtube.com/watch?v=nHlYFoXRybk
when I go to navigator system setup when i push SETUP TIME the screen is frozen, I can use navigators because of it.
Do you know if i can solve it with any of your patches?
thanks!!
sorry! I wanted to say: when I go to navigator system setup when i push SETUP TIME the screen is frozen, I CAN'T use navigators because of it, they're frozen too.
This is a strange bug. You need system firmware reflash, I think for both radio and gps side. I can provide both with my patch, but I can't guarantee that will solve your problem.
There're two patches wich one should i choose?
the one for 7608, of course.
Also email me after purchase, and ask for firmware. I`ll send you links by email.
HI Petrut,
I have a china rns:
http://www.liberty-forever.com/index.php?page=215&lg=2
The system information to ResInfo:
Winner
SMDK2450 Board 5.0
Windows CE 5.0.1400
105 MB Ram
ARM920T S3C2450 (534MHZ)
800x480 pixels, 65536 colors
it's working your patch?i am verry interesting for this patch.
yes, item no 9 from wince 5 section.
does the 3g patch with this radio also ???
no, will not work because there is no usb port connected to gps board.
HI Petrut,
I have a china rns (noname, but it looks like ERISIN ES858v):
http://cgi.ebay.de/AUTORADIO-DOPPEL-DIN-2-DIN-NAVI-GPS-DVD-PLAYER-DVB-T-/130502871713
The system information according to ResInfo:
BSP Version: AIVCE6_NANO_Rel1.03...
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800*480 pixels, 65536 colors
This rns don’t have TMC. Is it possible with your WinCE 6 patch:
1.to activate USB or Bluetooth (with bt manager) as WIN CE
application
2.to have English language instead of Chinese language in win CE6
Thanks for Your answer!
Kind regards Mario
For that board is not possible what you ask, sorry.
But wincepatch works fine.
something new from the GAPI support for Win CE 6.0?
IGO8 and Primo will be so much faster :)
yes, coming in v8.3 for nowada 2450 boards only.
Probably next week.
Hello,
I have a similar case as posted by " Rey " on 21st July 2011: a chinese GPS/DVD unit with BSP Version: PrimaCE6EVB / Windows Embedded CE 6.0.3122 .
It is a unit for Peugeot 207:
http://www.tradetec.es/DVD-GPS-DVB-T-PEUGEOT-308-REFTR100/pt
I like the current Main Menu interface, Radio interface, but I don't like the iPod, USB/SD interface. Can you offer better interface? And also USB/Bluetooth modification support for external device? I would like to connect to OBD2 bluetooth device and use for example HOBDrive application.
Please let me know. I also have other friends with same model looking to improve the unit.
The unit also has CAN-BUS decoder interface to show trip computer information (mileage, fuel consumption, external temperature, etc).
Thanks
usb/sd/ipod interfacces can`t be changed, those are built in firmware.
Also no USB mod on your unit for external devices, that is only for nowada boards.
Hi, Petrut!
Do you have something for this board:
BSP VERSION: PRIMA CE6EVB_REL9.04
TT4X0A 6.0
WINDOWS EMBEDDED CE 6.0.3122
84.2MB RAM
ARM1136JF-S TT4X0A
800x480 PIXELS, 32-bit
Thanks in advance,
Rey
Sorry!
I've just seen that Neil Adams had asked you this before two months ago.
Thanks anyway!
please run the tools from tutorials and send me the results.
I built several wince 6 custom patches since then, and maybe one will fit your system. I need partitions lists in total commander and processes lists from itaskmanager.
Total Commander shows:
- data 2.54MB used/133MB free (which includes folders F_INI; F_RESET; DUMPFILES; EXTRADUMPFILES);
- FlashDisk 162MB used/155MB free (which includes folders FBOOT; FROOT; LOG; WALLPAPAER);
- Storage Card (GPS SD CARD);
- Standard Windows CE folders.
ITASKMANAGER shows:
- taskmgr.exe; gpsmc.exe; fymmain.exe; servicesd.exe; udevice.exe; udevice.exe; udevice.exe; udevice.exe; nk.exe.
Hope that helps...
yes, i have the right patch. You can buy any wince 6 patch, but don`t install the files you receive automatically, i`ll send the patch manually.
Hi Petrut
It's me, Nathalie, the simple housewife :)
I installed the patch and everything went well....
Itried to use something (i think was the mp3 or the video player) and the following message appears...
"The selected device Dynavin V3 BMW E46,CE 5.0, 800x480 Display: 800x480x16
OS: Windows CE v5.00
Doesent match your device
Choose another device?"
What should I do?
Thank you very much for your time!
PS Also have the Garmin soft in the Sd and no way to link it into the GPS....why?
you must use system tools app from desktop and remove gapi, is not compatible with your system.
Also you must edit the garmin icon from iphone menu, there are instructions in readme.
Hi, after some problems with a new Version of Navigon, my Navigation Screen stayed dark, the normal setup screen doesnt come.
So I made an firmwareupdate but I think, the firmware was not right.
Now, the volume does not work right, for the radio, you can oly hear something at level 11 and 13,
dor the music coming from the sd card, it only works with 12 and 14 but on different speakers.
Do you provide, coming with your cepatch, also the right firmware?
Thank you,
Rainer
Media: SM86U1.110226.V2.02
Driver: 3B2A.DL30.1200W.8910
System: SM8641_110428V1CAN8
Chip&UI: STM8+V966U&(UI:XP.7.0)
produced in April 2011, name on the Invoice:AS-7608G VW RADIO +DVB-T +TMC
I provide firmware but only for gps side. You flashed radio side, abd probably used an older firmware. Current 7608 version is 4.2, I think you have 4.1. Contact audiosources or reseller and ask for right firmware based on serial numbers.
Thank you, will do this.
Hi Petrut
I have installed the wi-fi patch today, when i insert my dlink 140 and switch on it goes to the desktop and a box appears. The only thing i can read is usb the rest is in Chinese...,any Idea what to insert? cannot find in instructions
thanks
Peter
english firmware is mandatory. Read instructions from wincepatch, and reflash system. Then reinstall wifi patch. Also i`m not sure your dongle will work, depends of his revision...
Thanks for input
right i have reinstalled the patch,reinstalled WI-fi,it now sees the dongle and the dongle light is flashing...I am getting what i think is a log on box with 4 or 5 lines to fill in, But they are all in Chinese.
my desktop and iphone menu are all in English what am i doing wrong?
thanks for fantastic customer support
peter
I can't remember what unit you have. if you have dynavin, you need to reflash with English firmware, links in readme. If you have wince 6, dongle is not compatible, all wifi stuff is made in background at boot. Anyway, try to enter driver name rt2870.dll
Thanks again sorted..
Is a vodaphone kc3750 modem compatable with your 3g patch ?
Peter
try it on the unit, see if will ask for driver.
If yes, should work.
Dear Petrut!
First of all sorry for my english!
I have since two weeks a unit with the following dates:
Typ: 7501 (7")
Ver: F35A-F35A-6025-100714(WinCE 6.0)
ID: 03E2-80100723-281110-484E0242996D6D
D0021 MAIN8904 100524A08 1
VW01 Aug 7 2010
A.)The unit is fine and nice, but i have two problems:
1. The navi-sound mutes all voice (band,usb,cd,etc)and they come back a few seconds later.
2. It isn't in the unit TMC.
My question, whether there is a solution to these?
B.)I really like your blog, where I found your "Wince6-Wifi and 3G patch files". I have in this context the following questions:
3. Will they work on my unit?
4. Can i back to the orig. system in anytime? (because of the guarantee)
5. Can i hear the sounds (navi, radio, sd, cd, etc.) after the patch parallel? (no mute!)
Thank you in advance for your response and
sincerely from Hungary
Laszlo
A)1. is normal for that unit, nothing i can do
2.most of them don`t have tmc, there are different boards.
B)3 yes
4. yes
5. no
Hi Petrut,
i ordered your patch and installed it on my GPS. It's working fine, but i have 2 question:
On my board (Nowada 2450, N117 V6 WinCE6 800x600)is still the chinese firmware. Do you probably have an english one, or can i install n117 v3 or v4 on it?
Does the USB mod work on this board as usual (same pins)?
Thanks in advance and best regards,
Peter
sorry, of course it's 800x480 :-)
usb mod will work fine, follow tutorial.
No english firmware for your unit, sorry.
Don`t even try to install firmware from other versions...
What does the flashing red LED mean? Is it a message
for a failure of the GPS board?
red led on gps board means that is running fine. If no led, or is always on ( red), gps board is dead.
Sounds good :-)
Your patch is working pretty good on this board and USB Mod too. The only problem i actually have is TMC reception with the
onboard RTM6000. Antenna connected, but no signal. But I'm
sure I'll find a solution :-)
Thanks and have a good weekend!
Hi
I purchased the patch yesterday and have installed it
I also have IGOprimo. It might sound silly but were do you place it on storage card so icon picks it up and what name does icon look for
thanks
anywhere on sd, and edit igo icon iphone menu, info in readme.
Thanks Petrut
I have the folder in the root directory of the storagecard,it is called primo.
I cannot find the \ key on the keyboard, only a /
I think the correct syntax is \storagecard\primo\primo.exe
is that correct and if so where is the \ key.
can you tell me what keyboard will work with the installed drivers to make life easier
sorry to be a pain
peter
long press on / and other signs will appear, slide to the one you want. or you can change the keyboard from keyboard menu in bottom right corner.
Thanks again Petrut
Thats the answer Now working,will be back soon for wifi patch.
peter
Hello Sir,
This is very interesting indeed.
At the moment I'm a little unsure what it is you actually provide i.e. is it the software only?
So at this point I would be grateful if you could email me the full cost of all software and hardware to incorporate your upgrade into my system making the internet and a working desktop available on my head unit.
My exact system is the 1 shown here
http://autogpsdvds.com/index.php?route=product/product&path=48&product_id=72
Kind Regards
Steve
sorry, internet is not available for your unit, usb mod can`t be done...
wincepatch is working fine.
Hello. I have a radio 1 din for renault megane III. Can i update the original firmware?. the firm that you have, is installed on the sd card?. I control the radio from the steering wheel, can I lose control from the steering wheel with your firmware?. my radio is nowada 2450 with wince 6 and 800x480 resolution. thanks
the patch will tweak only the gps side ( board ), everything else will remain the same. My patch is installed on internal memory and sd, 99% is on sd.
Hello Petrut,i have this radio:
Winner
SMDK2450 Board 5.0
Windows CE 5.0.1400
105 MB RAM
ARM920T S3C2450 (400 MHz)
480x234 pixels,65536 colors
--------------------------------------------------------------------------------------
Data: 31,9 MB =84kb used 31,9 mb free
FlashDisk: 665 MB= 40,6 mb used 625mb free
it's working your patch?i am verry interesting for this patch like in video and is have wi-fi?thank's
you are romanian guy?
my model is SOUNDTON NAV-10 and another problem i want something setting for display like brightness if is possible,thank's
item no 9 from wince 5 section will work. No settings for display on wince 5 units.
For me work internet or usb mode?i waiting for your answer
no, sorry
sorry for the downtime these days, i changed hostimg to something reliable !
I am enjoying the patch for the most part. I have some issues with settings persisting after powering off my unit. The most frustrating of these issues is with the Nitrogen Player, which is actually the main reason I opted for this patch in the first place.
For example, any changes I make in the settings dialog of nitrogen are not saved after the unit is turned off then turned on again. This behavior seems to persist through most applications.
How can I resolve this?
My other main problem is getting nitrogen to display my album artwork, I've tried everything, with no success.
If I could work out these two issues I would be a very happy customer.
Thank You!
about nitrogen settings, this shouldn`t happen. Please download latest data files for your patch from the link in the readme, if you are an older customer, before 8.1 patch, and replace nitrogen folder.
The album art is easy:
1) Image file with the same filename as the song file (e.g. "\Music\Coldplay - Clocks.jpg" for "\Music\Coldplay - Clocks.mp3");
2) Image file containing the album name (ID3 tag) (e.g. "\Music\*Viva la Vida*.jpg" for a song which ID3 tag for album name is "Viva la Vida");
3) Image file inside the folder which one of these filenames: "Folder.jpg", "Cover.jpg", "AlbumArt.jpg", "AlbumArtSmall.jpg".
hi petrut,
what is your email address? its not mentioned anywhere in your website. i need to send you the deviceid.txt file back to you.
I suggest you add that to your readme file, otherwise you'll have others like me trying to follow the instructions but are not able because they cant find your email address..
thanks in advance
Hello,
my card is Nowada 2450 N117 PCB V6
TMC RTM-6000
Screen Resolution 800x480
WINCE 6.0
Will your patch work with my radio?
--Mart
yes, should work fine, item 1 from wince 6 section.
Hi,
sounds good :)
Can you tell me if 5v supply is working?
http://www.china-rns.com/attachments/igo-8-amigo-primo/2922d1308946604-tmc-hardware-gefunden-aber-keine-sender-imag0092.jpg
Thx,
Mart
yes, will work, see tutorials for board pinout.
Works very well! No problems at all!
Thx
--mart
Hello
I have a Chinese no name double din unit and am having trouble loading the igo maps into it. It seems to read the SD card and show the path but wont load. Firstly, do you have a patch for a SAcGM1001 and secondly, will your patch help solve my problem? I'm in Australia.
Thanks
Lauren
sorry, NO to both questions... Try to find another igo release.
I just bought a 2004 BMW X5 and about to install the Dynavin E39 system. I want to integrate my iPhone 4 for internet access and whatever else cool things these two devices can do... Can you give me the latest on how to utilize 3G or Wifi or anything else?
e46forums.com, there is a special thread with a lot of info , also videos, etc.
Also there is video on mainpage of this site and description in patch details.
This question was because Tomtom icon available in wincepatch demo.
I have search everywhere but today there is no working Tomtom release for my Nowada wince 6 unit.
Thank you anyway.
I tried to install the patch but I have one error .
Missing file. I unzip "nwd2440_CE5_480x234.rar" in my SD card.
There is only wincepatch folder with all file that I decompressed.Please help me
REgards
make sure the archive will decompress without errors. If have errors, download again. Also download data files as instructed in the readme file from main archive.
No errors in decompress phase.
With RES_INFO:
NEVADA_2440 , MESADA_2440 Multiplatform 5.0 , Windows Ce 5.0.1400 - ARM920T , S3C2440 (385Mhz) , 480x234 (65k).
During installation I receive "Data File missing.Please read the readme.doc ..."
With explorer.exe I find :
Folder - "Application Data"
Folder - "CAM_DATA"
Folder - "My documents"
NWDFlash - "Voices" Folder with "Collected" file and "touchcali"(file),"ttmobile"(file),"ttnavigator"(file)
Folder - profiles
Folder - Programs Files (no files or folder)
Storage card
Folder - Temp (no files or folder)
Folder - Windows (with various file and folder)
Furthermore In my Maisun radio I find (( in a screen similar to your number 6 patch WINCE5):
ID 4468-80081215-1F3F10-384E57-2D7C7871
Ver. : D097-B21A-5009 ( windowsCe 5.0)
Mem Storage: 40936 kb
Avail Mem: : 36412 kb
Please help me
REgards
Hi Petrut
I have a NOWADA 2450 N117_PCB_V5 with win CE 6 and
I am really interesting by your patch.
My question is about Tomtom Navigator, it doesnt work with my Nowada, he start but I get a message "not enough memory".
If Tomtom Navigator run with your patch I will order it, so tell me please.
Thank you.
will not help your tomtom issue, you need to find another tomtom release. I can`t help.
Hi Petrut,
I have a problem with the USB wifi pen. when I put on the Edimax EW-7711UMn de winc return me this:
http://imageshack.us/photo/my-images/13/img0791ds.jpg/
"Unidentified USB Devie - Enter the name of the driver for this USB device:_____"
Can you help me?
I installed, winchack, wifipatch an wifiupdate
send me an email, tell me what unit you have, wince version ( 100% check it ) . As i can see from your screennshot the wifi is not installed. No browser icons on desktop.
Hey How do I use the .net 3.5 ?
I need it to work for a sertain application. If I start the aplication it says it cannot run it needs .net 3.5. I looked in the program files, .net is there how do I make sure the system knows its there and use it for my application to work ? Its the tomtom audio fix, it needs .net 3.5 to work. Please advise, I have Wince patch 8.2 up and running.
.netcf was removed from wince 6 patch due to some issues on some devices.
if you want it, email me from the email adress used to pay and request a .netcf enabled patch.
Hey Petrut
I cant get Remote desktop to work
When i open the Remote desktop on the dynavin
The keyboard is Not coming up so i cant write anything
Can you guide mé set it up tanks again for erffort in This!
already covered on forums, set taskbar always on to access keyboard in internet applications.
hi, i have this unit: http://cgi.ebay.com/dash-GPS-car-pc-Car-dvd-player-Surf-Wifi-3G-Internet-/150607429005?pt=LH_DefaultDomain_0&hash=item2310e6fd8d
but my unit is 2 years old so i dont have that interface, i would like to know if your wifi patch works with my unit, this is the information i got from the unit:
platform_oem
platform_type 5.0
windows ce 5.0
95.0mb ram
arm920t s3c2440a(405mhz)
800x480 pixels,62236 colors
and i would like to know if can i solder the usb port to my unit, this one have one, but the sd cards boards is burned, so doesn work. thanks
by the way i can acces to the windows ce without problems.
what a bad notice, i know that this new units accept wifi usb dongle, so i thing theres a way to configure it, do you have some patch or program to modify the firmware? do you know also how to know if can i solder a usb port to my gps? thanks alot
no, patch doesnt work, also can`t solder usb, i don`t know thw right pins, sorry.
Hey Petrut i just installed the wifipatch
Its working great fuck am so happy thank your the Best
But when i go to youtube.com i cant see videos because
Flash is Not installed i and cant upgrade because
It Not possible for my operating system i have wince 5.0
Please help mé get flash working
not possible to see youtube flash videos on wince, 5 or 6.
Never ever, sorry.
This is discussed already on so many forums...
Hey Petrut
i have sent the deviceID.txt last night when will you send futher instructions to install the wifi-patch on my dynavin?
you allso work in the weekends? or are you first back on the job on monday? sorry for many quistions!! but really can't wait to setup the internet in the car :-)
for my customers i work all the time :)
check mail !
hello petrut
i have a unit with this system information:
BSP Version: AIVCE6_NANO_Rel1.03
AT8X0 6.0
Windows Embedded CE 6.0.3122
118 MB RAM
ARM1136JF-S AT840
800x480pixels, 65536 colors
wich patch can i use?
It is an Erisin ES862D 2 DIn Radio
Thanks and best regards,
Peter
you can try wince 6 for 7608. If will not install,i`ll make a custom one for you, just need the info from tutorials.
Hi, Petrut, I wonder if you have found any solution for the speakers issue with win CE, I`ve been looking on several forums and the only answer that found was a change in the main menu of the gps-radio (on the SOUND configurarion, unchecking the navigation audio option), but sadly mine doesn´t have that option....on the other hand, in my radio, will it be impossible to get a link between the winCE and usb port??......I should stop searching info about it??
Sorry for so many questions....
the sound option is not available on all units, sorry.
About usb, you can`t do usb mod on your board. Or at least i don`t know how to do it...
Sorry, I should read the tutorials first, anyway already running the patch in my gps radio (samsung, smdk 2450, win ce 5.0).........awesome, perfectly working thanks, you save me a lot of time....i´ll be in touch
thanks for the feedback. Enjoy !
I recently bought an oem radio with no serial, labels or anything, but surfing the web found a picture equal to my equipment and the model is CAV 8062, I´m trying to get a better look for it (wolfncu on wince 5.0) but it´s been impossible to get something really good, so if you can help me, that would be great,
thanks in advance
I have the Dynavin E9X unit with WINCE 5 and half of my menu is in chinese? Will the patch fix the English or do I need to run a firmware update first. Also, I have a Motorola Atrix and I am interested in the 3g patch, will that phone work?
the patch will fix most visible menus, but also come with firmware for reflash. Wifi patch will work with your phone and will allow you to use the internet data plan from your phone, also same browsing speed...
I bought the patch for Wince ANY Nowada 2450 device when I start Desktop minimizes what he does or can the time?
I Witson Mazda3 screenshot http://imageshack.us/photo/my-images/835/imag0007o.jpg
(sry for my english)
sorry i really don`t understand the question...
Hello,
I have what looks like a SKG17A1 board inside my disassembled all in one chinese gps/bluetooth/tv/dvd players. can you tell me if it is possible to run your patch, if so which one?
Also on the GPS board can you tell me which pins would be the correct for the USB mod, to get wifi?
I can email many pictures, and will reply right away, please contact me back and I will be a happy customer, will recommend to all friends of mine, and even donate extra for your help plus buy both patches.
Let me know if you need anything else,
Thank you again.
i can build custom patch for your unit, but because you have only 40 mb ram, you`ll not be able to use iphone menu and GPS programs at same time, also forget about wifi, that one will take 15-20 mb all time.
Also usb mod is not possible on your unit.
Sorry.
I forgot to mention the specs,
Product ID:SACGM1001-V4.0.7
System Version: V4.0-2009/12/21
Request Serial Number
RESINFO
System-
-RIZETECH
-RT GPS
-Windows CE 5.0
-39.1 MB RAM
-ARM ARM920
-480x272 pixels, 65536 colors
Memory
-Program Memory 37.1MB
-17.4MB Used
-19.7MB Free
-Storage Memory 1.99MB
-692KB Used
-1.32MB Free
Storage
-Nand Flash 27.9MB
-12.9MB Used
-15.0MB Free
-SDMMC 7.40GB
-631MB Used
-6.79GB Free
The sticker on the board on top says:
SACGM1001
20100416
V4.0.7
And below that sticker,
GPS MODULE
SKG17A1
And read the barcode numbers, above sticker covers it.
I have a question works with patch Witson equipment www.witson.com
with most units yes.
Hi!
I want to buy wince patch.
I have an erisin es966d.
http://www.padphone-world.com/2-Din-Car-DVD-Player/-/Erisin-ES996D-7-Audio-Player-GPS/2011032401034689519.html
I soldered usb cable to gps-board and thumbdrive shows up as descibed in tutorial.
Resinfo shows:
BSP Version:AIVCE6_NANO_Rel1.03..
AT8XO 6.0
Windows Embedded CE 6.0.3122
118MB RAM
ARM1136JF-S AT840
800X480 PIX 65536 COL.
Do you have a suitable patch or do you need more info?
Kalle
Edit: I do not get thumbdrive to show with cecmd.exe.
Any known issues with Erisin board?
Very similar gps-board as on tutorial page.
/kalle
you said you get flashdrive then you don`t get it in total commander, how is it after all? Try a usb device, like wireless adaptor, modems, etc, see if system ask for driver in gps menu. Or a flashdrive with a led, see it led is powered.
You can buy the wince 6 patch for as7608, and if is not fully working i`ll build a custom one for you.
Thougt it was workin, but it was the gps sd-card that i saw.
Light is flashing on thumbdrive and also on a bluetooth-stick i tried, but win-ce doesnt seem to recognise it.
Only need win-ce if i can get wifi to work.
I am about to get this device to and I would like to know if you got wincepatch to apply on it?
I'am interested by this nice sowftware tool...
if is nowada board, usb mod should work. Check cable soldering, also use a quality shielded cable.
Hi Petrut,
Excellent Application (I bought it last week), My Dynavin E46 V5 runs excellent!. I have a question/problem:
I am having the Gapi pop up in Igo Primo and I solved temporary copying a gapi.dll and GX_HPC.ini directly into the Primo Folder, because my unit was not saving the Gapi set up regarding the Audi Unit instead of the E46 unit. should I do something special to keep the gapi set up everytime I turn off the unit?
Another issue: my task bar is hidden and I cannot reach it neither with a stylus nor with my finger so I have to connect a external keyboard to access it, then I untick the option to hide it but when I reboot the unit, it is hidden again. do you have any suggestion?
Regards,
Use system tools app and you'll solve both problems.
Hi Petrut,
I've installed your patch on my Dynavin DVN-MLMB for Mercedes ML (version V5). Everything works fine.
The only issue is that when I use Igo8 (or any other navigation program) navigation sound comes out from all speakers instead of coming out from front speakers only.
I've tryed to change navigation program settings, but without success.
When I bought the unit the Dynavin site said that the unit had the Dual Zone function.
Can you help me?
Thanks
i can`t help, but i`m sure that on dynavin the sound output can be changed to all speaker or front only, for wince sounds. Search on dynavin forums, on e46fanatics.com, etc
Petrut sa-mi dai de veste daca ai indentificat placade baza daca nu o sa-l desfac si sa fac niste poze poate it vine mai usor asa, sper sa se poate adapta un port USB.
Nu se poate pune USB pe ea, cel putin din câte știu eu.
Îți recomand sa îl desfaci si sa îmi trimiti poze cu pinii.
Hello Petrut,
i whant to buy me next week for my Mercedes following Dynavin device: http://www.dynavin.com/products/product_dnv_mbe_most.php in the german version. I whant to use the internet function for checking and writing emails and a navi sw that can use live services out of the internet.
What all i need from you:
- WinCE 5 patch
- English Firmware
- WiFi Patch
- 3G Patch
Is it possible that i install these patches with medium know of windows?
How the Dynavin gets WiFi feature? I need a Wifi usb stick to connect to the usb ports? Or did Dynavin have WiFi in its device? What stick will work for me i can order in germany? ( I habe AVM and Draytek stick). If is use a direct 3G usb stick, what model will work? (i have a Vodafone Huawei K3565-Z).
Where i can get the iGO Primo Navi sw?
Many questions, perhaps you can answer some.
Thanks
Sven
you need wince 5 patch ( or 6, maybe your unit will come with wince 6, check it before ordering patch ), wifi or 3g patches, depends what you want to use. Wifi works with an adaptor. ONLY supported wifi adaptors are the one lised on my site. 3G modems, huawei will work but not K series, need E series, e1550, etc.
Hello Petrut,
Thanks for the fast answer. I will buy a listet one WiFi Dongle, thanks! I have orderd my Dynavin DVN-MBE-MOST at the moment ;-)
Will the original Dynavin UMTS Modem USB-Adapter work on the USB connection to the Dynavin with the WinCE hack?
Original Dynavin UMTS-USB Dongle: http://www.dynavin.de/network.php
When not you have a list of supported UMTS dongles?
Thanks
Sven
original dynavin modem will work, of course. Any modem should work if it ask for driver in wince mode, read info on 3g patch. Huawei E series recommended.
Petrut, timite-mi si mie patch-ul care trebuie si spune-mi te rog daca merge pe chinezaria asta sa deblochez portu din fata miniusb sau sa adaptez un port USB pe placa sa-mi pot pune wifi/3g.
Multumesc anticipat.
trimite-mi poze cu partitiile in total commander, lista de procese in itaskmanager si poze cu meniul principal in radio si gps. Asa pot sa identific placa mai bine. Slabe sanse sa pui usb pe ea daca nu e nowada.
ti-am trimis email cu pozele.
@genesic, wd6050 is on their site, www.szwaywell.com, email them and buy it, wd6050 is vw only. My patch will work on any waywell unit.
@pablo, tracking is not available for wifi patch, because system is not connected all time to internet and automatic connect at boot is not possible, sorry. I can give it to you but will not work properly...
@mircea, ma bucur ca ai rezolvat :)
Salut.
Am downladat si eu pe data de 16/1/2011 nwd2440_CE5_800x480_new.rar de la tine dar nu a mers ca nu era ce-mi trebuia si mi-ai trimis altul care dadea o eroare si se oprea din instalare. Nu te-am mai deranjat pt ca acuma am reusit sa intru in el si sa redenumesc fila care am modificato de nu mai pornea si-mi cerea firmware update.
2 Din Gps Dvd OEM AS7145
SMDK2450 BOARD 5.0
WINDOWS CE 5.0
58,7 MB RAM
ARM920T S3C2450 534 Mhz
800x480 Pixels, 65536 Colors
Hi Petruts I have the Wifi patch, now how can I test the tracking function
Hello, I am about to buy a Waywell unit. I have searched everywhere for the WD6050 available to purchase but canonly find the WD6045 and the WD 8949 located here: http://www.aliexpress.com/store/902193/209398836-446739187/Special-Car-DVD-player-For-Audi-A3-with-original-steering-wheel-control.html
Can you tell me if Wince will work with the WD8949 or the WD6045? I would REALLY like to get it for one of these units!
Thanks
@serg, you bought wrong patch!!! Why don't you read tutorials before? I'll replace the patch in your account with right one. You can send me firmware that works on your unit if you have it. Thanks
Thanks!
I read the tutorial. But for some reason thought that the patch number 5 - for me. Hurry. In the evening, try the new patch.
Thanks again!
Hi! At me it is some questions:
- COPY the Program Files folder from the data800x480 folder to WINCEPATCH folder
Where there should be a folder??
- this version ( 8.1 ) must be installed over the old version.
- Where to take the old version???
if you dont have an older version just install it as it is. That message is for older customers that want to upgrade.
Read instructions carefully, extract all archives and will install correctly.
Excuse me. But at me the same
i have this model:
Mesada_2440
Mesada_2440 multi-platform 5.0
Windows CE 5.0.1400
40.9 MB RAM
ARM920T S3C2440A (385 Mhz)
800x480 pixels,65536 colors
i get this error when installing:
Couldnt create directory'\ResidentFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\ResidentFlash\$MSD$$")
In the device there is a folder \'NwdFlash \$ MSD $'
replaced in install.mscr ResidentFlash on NwdFlash. received the black screen. Your patch doesn't work on our devices. Though a picture same. I can send you an our Firmware.
Hello,
I have the same Model and the same issue.
Any idea how I can get it revitalised?
Hi Petrut,
I have N117 board on my head unit. Accidentally i've made a mistake. Seem like the bootloader is corrupt.
Is your patch able to restore the bootloader ?
you need to reflash firmware. I can provide firmware for many n117 wince 6 boards but i can`t guarantee that will recover your device. You can request firmware files after you get the patch.
Currently when i press GPS button on my HU, the screen displays "No Signal message". Is it possible to reflash using sdcard ? I've tried several times and seem like the module didn't read the file stored in the sdcard.
Petrut can you help me? My double din unit can't access the "console " screen. I'm unable to use gps or the menu. If I do the usb hack will I be able to reset my unit.and get functions working again? I have links of picture and video of what goes wrong.
send an email with details
hi i have tried to install patch with no success. i have this model:
Mesada_2440
Mesada_2440 multi-platform 5.0
Windows CE 5.0.1400
40.9 MB RAM
ARM920T S3C2440A (385 Mhz)
800x480 pixels,65536 colors
i get this error when installing:
Couldnt create directory'\ResidentFlash\$MSD$'
Line 43 (\StorageCard\wincepatch\INSTALL.mscr):
MkDir("\ResidentFlash\$MSD$$")
i am stuck there.
you need item no 5 from wince 5 section, and i see you bought it. It should work now...
Yes, I'm realy stupid, I found the link in "README FIRST" file in the patch. I'm very sorry, Petrut.
Petrut, I sent you 2 messages about "data 480x234" and you tell me :Read instructions, there is link for data files, but I can not find THIS link! After enter to my account I can re-download the patch nwd2440_CE5_480x234.rar (4,6Mo) but I can not find the link for data. Am I stupid...??? or it's maybe hide? Please help me!
Pablo, yes, can be used with my 3G patch.
Hi Petrut, I have one Dynavin HSUPA 3G modem from one VW unit, I wonder if I can reuse it with your 3G patch for one WINCA WINCE6 unit ?
RGDS
Pablo
Hi Petrut,
It you could write a custom patch for 480x234 and wince 6 that would be great thanks.
Dave
@mauricio, change your navigation program,use igo or something else that have full support for 800x480 screen, nothing is wrong with the unit. The Bluetooth screen is normal too.
@Maurice, all firmwares i have in my patch are 800x480 so is not possible to have a lower resolution screeen. If the image have now black bars around it, use main shell gps settings to play with size and position.
I did the English v3 firmware update for my dynavin DVN-MBC, after the install i seem to have lower resolution on my navi screen. I followed the instructions thoroughly. What could have caused this, and how do i fix it?
Problem resolution WD6050
Nowada 2450
WinCe 6.0 800x480 65536 colors
Picture:
https://picasaweb.google.com/104576022403941988731/ResolutionProblem#
@mauricio, post a picture...
@lynx, yeah, easy to find, just set taskbar on. There is a setting in tweaks too.
Hi Petrut,
I have the following question about wi-fi'patch:
On desktop mode if I want to connect to network which is known Network Key, how can I call a virtual keyboard?
Is there a way to activate the virtual keyboard?
Wherever I need to write the keyboard appears, but in the netwok key box does not appear.
PS:
I found a way how to do!
I have a problem with my WD6050, seem to be a problem of resolution of the screen. In the listings of GPS, the lines are assembled with each other, and the buttons in the top of the screen overlap the screen making uncomfortable use it. Please let me know, if you patch will fix this problem?
there are patches for 480x234, see wince 5 section. If you have wince 6, i`ll build a custom one for you if you need it. Some programs will not work in 480x234, so are removed from patch ( naviplayer, etc ).
Hi, can you tel me if there will be a patch for the 480 X 234 to sort out the screen size problems?
Thanks
@Neil, my patch will not work at all on your unit type, sorry.
Hello
I have had my unit for over a year and it has worked well
Recently the unit has some problems it will not play video off the USB stick ... shows vo filter missing /error
Navigation shuts down occasionally
Radio reception is poor
RDS does not work well
I have the VW Sagittar unit
Device: Prima
Description: Shenzen Roadrover Technology
BSP Version: Prima CE6EVB- Rel 9.04
TTX4X0 A6.0
Win CE 6.0.3122
RAM: 887.8Mb
ARM136JF-S TT4XOA
800 X 480 pixels 65536 colours
MCU 3.35 VM-5N81 - V1.15
Does your patch install a new video player? will it help my radio reception?
Is there a package price for the wireless patch and the Win 6 patch?
Thanks
Neil C. Adams
neil.adams@ualberta.net
@Guilherme Taliba, run the tools from tutorials ( rezinfo, itaskmanager and total commnander ) and tell me partitions names and processes and send all info to my email. Iphone menu can be launched at boot automatically if your navi system have the option to run the navi exe automatically...
@deadwiz,will be possible in next release, i`ll add a tool to add any program in startup, maximum 3 programs.
Thanks. Still love this patch, still trying to find a way to get nitrogen to work out of the front speakers.
How could I add Nitrogen to auto startup with Wince just like the iPhone UI does?
Thanks.
Hi There! Excelent Work! I'm Planning to Patch my Chinese Media Center, but first I need to check the compatibility using your application.
I have a question about the Patch: What about TV? I have "1 seg - digital" TV working nice on its original state. Will TV work after the patch?
Thanks a Lot!
Another Question: Can this "Iphone look UI" load automatically after turning on the device?
Or I should always execute GPS navigation to bring Windows CE UI? Thanks@!
Just an Update: My device is:
HANDHOLD REFERENCE BOARD AT101A 6.0
Windows CE 6.0
Processor: ARM1136F-S
Resolution: 800x480
The system I have is: http://www.dinodirect.com/touchscreen-car-dvd-player-gps-navigator.html
What Patch should I Purchase? I didn't find this model in your site. Thanks!
send me more info by email. Device type, model, and some pictures with the main menu.
I have attempted to install wincepatch on my Mesada 2450, WINCE 5 Nowada 2450, WINCE 5
Downloaded file "nwd2450_CE5_800x480.rar"
I have followed the readme instructions and installation progress correctly I think. However after restart and going to the desktop the system crashes and reboots after a few seconds.
At no point during installation did I get the window allowing me to disable auto start navigation. I am assuming this is the problem as it is trying to start the nav program.
Can you please explain how to disable the auto start nav function.
Hi, I Purchased your WinCEpatch for my Xtrons TD716G and it
works but all images are to big to fit the screen.
I got the 800X480 Patch, can you help?
Thanks
Dave
@Soso, wince will be still in chinese, so some applications will not work. You can unsitall it at any time, and you`ll not lose original interface, the interface will be changed only in gps mode, not radio, dvd, etc. Patch no 8 from wince 5 section will work.
@snoob , NO
@Hej, not possible, is different hardware.
If I install the patch, will I be able to read content from the SD-media-slot in my WinCE5, and not just from the GPS slot?
Other way to pay except PayPal???
I gues no? ok.
I have a 2 din unit Xtrons TD714G,
Mesada_2416, Windows Ce 5.0
104 Mb Ram, Arm926EJ S3C2416, 534 MHz,
800x400 pixels 65536 colours,
which patch works for me? Will I lose my unit interface?
If I want, can I uninstall the patch and the unit will be
back to original? My WinCe will be in english? so i will have no problem with another programs "No compatible Language"?
read instructions ? download and add correctly the data files.
Petrut.
I tried to install on my Mesada 2450 CE5 in dash 7" GPS but comes up Data files missing.Any help would be appreciated.
Thanks.
yes, will work, make sure main exe file is named player.exe
Hi Petrut,
In your patch there is TSPMP v.072 video player.
I have TCPMP version 0.81 which is much better, works lightly and has advantages over the older version.
My question is, if i replace the content in a folder SDCard / Program Files / Tcpmp whether it will work the new version?
@whymax, wincepatch will work on your unit, 100% safe, the one for 2450 boards will work. About wifi, unless your unit can access usb flash drives in wince side ( total commander for example, see tutorials ), there is no way to make it work, usb mod doesnt work on your unit.
@YETB, just add the folder with the software on sd, and set the icon path in iphone menu, read instructions provided.
Thanks, I'll try to install
My firmware dump: http://whymax.ru/files/soft/BinFLAS_0_59768832.img
Purchased your WinCEpatch for my in dash dvd -
what is the procedure to install (add) another GPS unit to the system?
My GPS has Sygic - and I'd like to add Igo8 to it.
I'm not asking how to get Igo - I'm asking how to install it into the WinCE
Thanks
If all goes well, I'll write a review on my blog with a link to your patch, as well as write detailed instructions on the forums, automotive club, can I count on a discount?
Hi, this is my device For Suzuki SX4:
http://forum.clubsx4.ru/showpost.php?p=148466&postcount=491
http://forum.clubsx4.ru/showpost.php?p=146857&postcount=465
Nowada_2450
NWD_2450 multi-platform 5.0
Windows CE 5.0.1400
122 MB RAM
ARM926EJ S3C2450 (534 MHz)
800x480 pixels, 65536 colors
I want to install your patch WinCE 5 and WiFi Patch, will it work on my device?
There is a risk that the device will not start?
Could you send me detailed instructions on installing the patch before I buy?
Thank you.
I found the patch very useful for my Dynavin and I presented it on the Mercedes Benz Forum Club Italia.
Petrut gave me a unique help in setting up the patch and the Internet connection on my unit.
Many thanks Petrut and best compliments for your new site.
No, wince is a very basic system compared to winmobile, like win95 to win xp. But some ppc ( win mob 2003) will work, also some wm 5 apps if installed and tweaked right. You can search for ppc applications and games. Also flash games work, I'll add a tool to install them in next release.
Petrut, your wincehack is really awesome, installed in my E46 dynavin but i really want more games and programs, do you know where to download this?
and is windows wince ce and windows mobile (wm) the same???
The sound issue is well known, is wince limitation on some units and some car sound systems. For example i don`t have it in my vw jetta with 8 speakers and also in audi a4 with bose system. You can try other wince media players or play with the settings in dynavin gps or main menus.
About wince language, if you see a single chinese word, 100% firmware is chinese. English firmware is better, reflash, is no risk.
After a long long search in the forums, I found the decision for Dynavin units.
Now all WinCE applications emit sound in all speakers and I am very glad of this.
Could you please tell me how you got this to work? Or post the a link for where you found your solution?
Thanks!
And another question:
How can I be 100% sure ,do I have English or Chinese firmware?
Many things in winCE are in English and some are in Chinese.
I've already installed the winCE patch and I need confirmation that if I add the English language will i get a problem or not.
Hi Petrut,
I installed winCE patch, my question is why the video player and MP3 player sound comes only from the front speakers?
Did someone else had a similar problem?
My unit is Dynavin DVN-MBML.
All applications under winCE all sound comes only from front speakers.
Whether this problem has a solution?
Thank you!
hello Lynx,
did u fix your problem with the speakers?
i heve the same problem, i can hear sound on gps side and wince only from front speakers! how i can do it?
Steve
@Carlos, no 2 is the right one, patch for any nowada 2450 board.
@murat, in iphone menu you need to set path for the icon ( igo primo ) to the primo executable. Read instructions about how to do that. No idea about bejewled2, probably not working on your unit or missing files, i`ll check. And yes, you need english firmware, there is no risk, that`s why is included with the patch for dynavin. And no need to reinstall wincepatch.
I installed today my wincepatch on dynavin v5. It works really great. Good job petrut.
Hey Petrut...
I most thank you for this job you are doing this is really good stuff sorry for the english am from denmark
I have download the wince hack and installed in my dynavin
and it works great!!!
but i have some problems with some things!
1. i already have primo 1.2 on the sd card but when am in iphonetoday and i press the igo primo icon nothing happens?
2: in iphonetoday i cant see the game bejeweled2 you know why?
3. am getting errors in wince when changing things then the buttons with Y N is in chinsese is it because i need to install english firmware to get english langauge, i can brick the dynavin if i install the language package if i already did the wince hack ?
Hope that you can help!!
hello
i have a unit with this settings:
mesada_2440
mesada_2440 multi-platform 5.0
windows ce 5.0 1400
45.4MB RAM
ARM920T S3C2440A (385Mhz)
800x480pixels, 65536 colors
wich patch should i use:
Wince patch for Dynavin devices only ! Wince 5, Nowada 2450 ( Mesada 2440 ), 800x480
or
2. Wince patch for ANY Nowada 2450 device ( ex. AS7608, WD6050, CY7088, etc ), wince 5, 800x480
Thanks
Carlos
Ed, please read tutorials section and run resinfo, then send me or post here the results. I can`t know what board is inside...
Hi Petrut,
I have this roadrover unit
http://www.roadrover.cn/e/productshow.asp?id=301&mnid=19046&classname=首页滚动图片
Is it possible to install the wince6 and WiFi patches ?
Thanks
Ed
@lynx, as you can see there is patch already done for ANY dynavin unit. Just buy it from wince 5 section, and buy wifi too.
Hi Petrut,
This information is it sufficient for making a hack for WinCE 5.0 and wi-fi patch?
http://img593.imageshack.us/img593/6482/16042011195a.jpg
My unit is Dynavin DVN-MBML and is brand new.
Regards
keep an eye on this site :), coming very soon.
Hey Petrut,
Hows the 3G patch coming along, are you any closer to having a working setup? :)
Yes, wince patch can be installed only from sd. USB gps is needed only for wifi or 3g
I dont have acces to my USB/GPS. is it possible to install the wincepatch using the sd card? (the glove for navigation)
wincepatch will work, wifi will not work, can`t add usb to wince on hualingan boards.
will dynavin software with you software and patches work on a Hualigan ?
thank you
wifi/3g is possible ONLY on nowada/mesada boards, and only by using a usb dongle, because on them you can solder a usb cable that can access wince...
Built in bluetooth is useless, can`t be used from wince.
Check your board type and reply..
Hi Petrut,
just a question: I own 2 very normal navigation devices, which are based on win ce 5/6. It's no problem to open them to access explorer.exe, but I like the wifi/3g connection stuff you are offering.
Will it be possible to use your wifi patch together with a wifi-sd card to access the internet over wifi tethering?
Or will there be a possibility to access internet over built in bluetooth using my mobile phone's network connection?
best,
Christian
i don`t know the unit, give me more details, a link and pictures would be nice.
i have roadrover DDin is possible to change only the interface and the icons and is there is any patch for this one ?
my patch doesn`t remove original interface, will close it and run another one. So you can always come back to original interface. Please note that my interface is ONLY in gps menu/board.
Hi Petrut, if i buy your wince5 patch, and after i want to come back original dynavin interface...i can? thank you
Hi, Garmin is not included, sorry, i can`t include navigation softwares, not legal. Is icon only.
But my patch will help you install Garmin on Dynavin, you can add the missing dll files in windows folder at boot, i think the missing files are the garmin issue on chinese devices.
Is very easy to install, just press install.exe and wait to finish.
Absolutely no risk for your device, see my feedback on e46fanatics.
Hi Petrut,
In the forum section "Patch Details" Garmin icon is displayed.
Is there a working version of Garmin included in your patch?
I have not heard until now successfully installed Garmin MXT in 800x480 resolution (Dynavin unit).
In my country Garmin is the best navigation.
The reason is the coverage of the maps.
My second question is:
Is it difficult to install your patch and is it dangerous?
If a potential conflict it possible to restore the old software or any other solution?
Thank you!
Good fellows! An excellent software, excellent work! Many thanks!
Hi, my patches will work with any dynavin unit.
You become a member when you purchase the patch, an account is created then.
About to buy the DVN-MBE from Dynavin. Will your patches work with it? Also, where is the link to become a member here? tks
thanks !
Fantastic and unique development on Win CE platforms! Congratulations for your new website!